"it is possible to completely erase a hard drive and install Snow Leopard without a pre-existing operating system in place, enabling users to bypass the possible headaches of an upgrade and go with a clean install instead. Wired said many users upgrading from Tiger should probably consider backing up their files from Tiger and doing a clean install instead."
I don't have an external harddrive. What other backup options do I have?
I recently discovered after installing the new Snow Leopard OS that I did not have a bluetooth option under my system preferences. I own a mid 2008 Macbook Pro (pre-unibody, more info below) and I know that I've used it before. I recently took my computer in to be repaired by Apple because the keyboard and trackpad were inconsistently responsive, and to fix it they simply replaced the entire top panel (with the keyboard and trackpad). I have also checked under the system profiler and it says that there is no information available for my bluetooth...what exactly does this mean? Did they forget to reinstall it? or what?
Posting for a friend who has just purchased Snow Leopard Box Set and wants to upgrade from Tiger. She was half way through the installation when she thought that Snow Leopard had not asked her to back up and she cancelled the installation half way through (not sure how, think she just turned off her Mac). She turned it back on but the only option it is giving her is too continue with the installation of Snow Leopard.
What she wants to know is will the erase all her data on her hard drive, or will she still have her files located in Documents/ Downloads etc when the installation is complete. I know when I upgraded from Leopard all these files were still present, I'm not so sure if it is the same with Tiger. Shes really worried about this as she has some valuable files in there.
TI used an external HD to back up everything first. I upgraded and it went just fine. Now neither USB port will recognize anything plugged in. iphone, ipod, camera, external HD, nothing. Someone suggested zapping the pram, but that didn't work.
i have an intel MacBook that i bought just before Leopard came out. Its currently running Tiger 10.4.11 and I'm thinking of upgrading it to Snow Leopard.
Ive never had problems upgrading before, but I'd like to make a backup of it first (just in case). My other Mac has Leopard on it when i bought it so I've had Time Machine to do it all for me. However, obviously, there is no Time Machine in Tiger.
Could i simply plug in an external HDD and have disc utility make a Disk Image of my MacBook HDD onto it to use as a backup?
I do not like OS X Lion on my Macbook Pro as I'm about to downgrade back to Snow Leopard. I do have a Time Machine backup with OS X 10.7. Will Snow Leopard read the newer Time Machine Backup? I just need my documents and pictures.. or would I need to back all that up as well?Â
Info: MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
The disk on one of our iMacs has failed, so I am seeking to replace it with a new drive and then restore from the current Time Machine backups stored on our Time Capsule. My plan was to attach the replacement drive to the iMac via a USB enclosure, format it, and recover the volume and once that is complete, replace the disk. The problem however is that the OS X installer's Restore System From Backups option does not display the correct backup volume. The Select A Backup Source displays only "Data" on network "tc" under the list of backup volumes.
Clicking on Connect to Remote DIsk brings up the authentication dialog, and I enter the correct credentials, but the volume list does not change, and the Continue button remains grayed-out. The syslog data from the Time Capsule confirms successful afp connections, and df confirms that the Data volume is being mounted from the TC. We have three Macs running 10.6.8, all writing their Time Machine backups to a Time Capsule running 7.6.1. Each computer has its own Time Capsule login ID, and all Time Machine backups have been working properly (new backups are being created and can recover files).
Using the Finder to examine the volumes on the Time Capsule, I can see that each computer has an empty Data volume and another volume with the computer's name which contains the sparse bundle that Time Machine is writing to. It looks like the issue is that the Installer is only looking for the Data volume and not showing the other volumes. Is there a super secret keyboard sequence I need to issue to get it to show the other volumes?
I need to do a complete restore of my MacBook from a previous time. Now, I back up my wife's MacBook and mine to the same external hard drive using Time Machine on a regular basis and if I open TM on my MacBook I can see all my backups in the 'time travel' view. As well, if I do a Finder search in my external hard drive, all the backup files are there, both my wife's and mine in two separate folders.
The problem comes when I try to restore, using my Install DVD. At the point that it asks me where the backup is stored, I click on my external hard drive and it shows my wife's and my backups as options. All my wife's backups appear when I select hers. But only my original backup appears when I select mine. It doesn't recognise all my subsequent backups. I've tried deleting my wife's backup folder but still only see my original backup.
My HP Photosmart 3210 all-in-one wouldn't initialize and sent error messages after I installed Snow Leopard yesterday. I went on the HP support network, which gave me a solution that sometimes works and sometimes doesn't, plus in the past I never had to take all the extra steps to scan a photo. The HP support site claims that upgrades for HP Printer devices was included with Snow Leopard. So why can't I just press the scan button like I used to?
Having printer issues after upgrading? Both my printers HP deskjet 6840 and HP officejet g85 will not print properly and I have been unable to find drivers for Mac OS 10.6.8 online.
I'm wondering if it is possible to install different MAC OS versions (for example, having Leopard and Tiger OS X) on the same computer, as you usually do with different versions of Windows just making some partitions. Is it possible? If yes... how?
I am having trouble installing Leopard over my 10.4 Tiger Mac, I am using "grey faced" dvd's that came with my 10.5 Leopard Macbook, to install Leopard on my Mac, but whenever it starts up the process of installing it, it gives me an error " Mac OS X can not be installed on this computer" It gives me 2 options, to restart or "ok", if i choose "OK" i can roam about in disk utility, password reset etc etc as you would" I am wondering if this is a computer/disk problem, or will I just need to go buy snow leopard from a retailer?
So I have a 15" MBP running Snow Leopard and have recently installed a Western Digital MyBook 1TB World Edition on the network to serve as my Time Machine backup drive. Most of the time, it works flawlessly and OSX / Time Machine does its thing and backs up.
Every once in a while, Time Machine says backup has been delayed because it cannot locate the network drive. This when I can easily access the network drive from other machines on the network, and also from my MBP in Finder. It's just Time Machine that somehow fails to find that drive. When I enter Time Machine preferences and look for the drive, it brings it up immediately and asks me for the username and pwd and viola ... it's up and running again.
I have 10.4.11 installed and have some time machine backups from a leopard system on one of my externals. When I try to navigate to one of the backups and get into any of the user folders like documents, pictures, etc it says I don't have permission to access them? Yet I check the permissions and they are read/write.
I have a macbook intel(black) it originally came with tiger, i installed leopard on it a while ago. How ever i dont like leopard i want tiger back. I lost the original grey cds that came with my macbook so i hooked it up to my imac with target disk mode. I erased the disk using disk utility. Then i installed tiger with an original copy of tiger bought in a mac store. My imac rebooted i follow the installation menu and it installed. the internal drive of my macbook booted on my imac asif it were an external drive.
I rebooted into the internal drive of the imac and ejected the macbook drive. I disconnected the firewire cable and rebooted my macbook. The problem is that it wont boot properly it just goes to the white screen make the startup sound and starts flashing a folder with a questionmark in it. ive tried resetting the pram etc but it doesnt seem to work. i tried holding alt at boot up all i get is the cursor and nothing happens. i can still connect it to my imac but that it. how can i get my macbook to reboot properly again?"
ive got a Imac 17inch 1.0ghz with 215mb ddr ram. anyways, as Sheepy suggested, i upgraded her to a nice speedy 500GB 7200 Sata drive and dropped 1.5gb ram into her...... but lets take a step back. when i got her, she was full of dust and had tiger on her.. no dramas, tiger is good. anyways, i wanted to do a reinstall of tiger, and so grabbed my tiger retail disk and started her up, no dramas there either, ran disk util, repartitioned (the old disk) and started to install. the install never finished and then it just rebooted after about 80% through... The reboot came to the disk flashing with the osx face and a question mark. I try a few more times, with the same result, and also with Leopard, also with the same result, but the leopard install actually tells me after about 80% that "Install failed" try again? anyways, so i think its a shagged optical drive. i have a few lying around and i need to get in there anyways to upgrade the hard drive. installing the HD and the new Optical drive went fine, all works well.. and while i was there also installed 500mb ddr400 stick in the main memory non user slot. close her up, checked the heatsink matchup spots and there dry as a nuns nasty.. theres no paste on them, but kinda like a pad.. (which isnt even sticky either) anyways, i stick em back together (without) cleaning the pad stuff nor with applying any paste and boot her up. I insert the leopard disk to istall and it all goes fine, i re-partition the newspeedy 7200rpm sata disk and start the install. and again.... gets to about 90% and reboots. flashing smily face with alternating question mark.
I am still on Tiger, mainly because I really like its feel and simplicity as compared to Leopard or Snow Leopard, and its been fine up until recently because it did everything I needed. Recently, I've been encountering more frequently apps that I want to try but that are only available on 10.5+.I have a Leopard CPU Drop-in Disk, and am thinking about upgrading soon, however, I am using a 120 GB HDD that is getting close to being full, and I am concerned that installing a new OS would eat up some of that precious available HDD spaceDoes anyone know what the size difference is between Tiger and Leopard or between Tiger and Snow Leopard? If it's more than 4 GB, I don't think it is really worth it to me.
I almost bought the upgrade disc today, however on further thought and reading around here, i've gathered that people seem to have A LOT of problems with macbooks in general. Since i bought my computer used and it doesn't have apple care, i'm thinking the age old saying "if it ain't broke, don't fix it." Because i'd hate to upgrade then i start having wireless problems etc.
Is it worth the upgrade? I do a lot of digital audio oriented stuff and i'd really like to upgrade simply because some virtual instruments and plug in's only work with 10.5 or above.
I want to upgrade to snow leopard from tiger before I get an Iphone. My system is:Â Macbook 1.1, Intel core duo, 2 Ghz, 1 processor, 2 cores, L2cache 2 MB, 1 GB memory. When I went to purchase the upgrade on line, it said it required intell core 2 duo.
I have a 17" iMac G4 that I was rung Tiger with, then I installed Leopard 10.5. I use this as a second computer. All is fine except that my Epson scanner does not work with 10.5. I've tried the latest drivers. I'd like to reinstall Tiger. I used the 10.5 disc to reformat the drive and start from square one. When I boot from my original Tiger disc it starts opening it's windows, but when I get to the point where I can choose Install or use Disk Utility to reformat from the Tiger disc, all windows freeze and I need to hard reboot from the power switch. Am I correct to assume that 10.5 won't let 10.4 to reinstall. Is this correct?
I am helping a friend update his macbook from tiger to snow leopard, if i put in the disk will he still have all of his stuff or does he need to back everything up?
I'm looking for an app that will allow me to specify which folders I want to copy to my external drive, updating existing files within it and copying new ones.
I don't want to backup settings, my whole harddrive nor make a bootable backup. Just something to backup what I want to backup and where.
Not sure if Time Machine can do that, but it wants me to reformat my external before I can even find out..and considering how much is on there, I really don't want to have to remove that all elsewhere while doing so. [Don't think I could anyway, none of my internal drives have that much space.]
So, does anyone know of a relatively painless backup app that could do simply what I want? Doesn't sound all that complicated in comparison to some of the more convoluted backup apps I keep finding.
I'm looking for some backup / sync software so that i can backup my macbook pro to my USB hard drive attached to my airport extreme. I've only found chronosync to work so far are there any others?
I already use time machine to a different disk so am just looking for another solution.
I've got two Macs: one Tiger (iLife '06), and one Leopard (iLife '08) and I would like to upgrade both to Snow Leopard. I'm in the UK.I need help finding the best price/capability compromiseI have looked at the prices for doing this and come up with the following options:Most expensive optionBuy the 5-user Mac Box Set (Including OS X Snow Leopard, iLife 09, iWork 09) for 179This way I've got both machines running the latest everything.Next OptionBuy the Single User Leopard box set (including iLife/iWork 09) to upgrade the Mini to Leopard (?108.34) then buy the Snow Leopard family upgrade box to upgrade both machines to Snow Leopard (?39), total ?147.34. This way I have iLife/iWork 09 on the MacMini but not the MacBook.
Cheapest OptionBuy the Single User Leopard disc to upgrade the Mini to Leopard (?68.99) then buy the Snow Leopard family upgrade box to upgrade both machines to Snow Leopard (?39), total ?107.99.
My wife's Macbook (2.0 Intel Core Duo) is not recognizing the Snow Leopard disc, and I'm not sure why. I initially thought that even though Apple is saying that all Intel's are compatible with SL, they focus on the Core 2 Duo's and since her computer is technically a single core, it wouldn't work. Everything I have read has stated that SL will just run in 32 bit mode with Core Duo's - so I'm pretty confused. As for it being a bad disc, it's recognized immediately in my MBP...
