My son broke the LCD screen on our older Macbook. Only the upper screen is visible. It looks like a LCD screen can be purchased for about $100 and is quite difficult to install. Can I ask the forum's opinion if it is worth replacing this screen? He will be entering college in the Fall and will need a PC. It's the only mac that runs on 10.6 instead of 10.7.
Info:
MacBook, Mac OS X (10.6.8)
I know it's ancient tech... but I've reverted to a 12" PB after selling my uni MacBook. I've owned two of these 12" PB 1.5ghz previously, both bought new (combo+60gb hd/superdrive +80gb) and the latter one cost me some bad business deal points because I was in a meeting outside in the sunlight and I could not read the screen. I sold it with Applecare to someone on MR last year. The one I bought is used, obviously, and the screen is "fine" no dead pixels or cracks or anything, it just will only be workable inside. Does anyone have any tips on the brightest or best screen replacement I can get for this? This one has a build date of August 2005 so it's been around, though in great condition. A bit "dim" and it might be worth it if I could get a new screen that is somewhat brighter.
View 1 Replies View RelatedI have a mid-2007 model and I replaced the x2 stock 1GB sticks with x2 2GB sticks. I followed the correct procedures, (I think), and when I powered it on the fan came back on but the screen was black. I unplugged the unit and replaced put the old RAM back in and now when I power it up the screen just goes grey and beeps when I turn it on.
Info:
Mac OS X (10.6.8)
Since installing SL, as many know, many older screensavers no longer work. I looooved this Blank Screen Saver [URL], and if anyone could tell me how I could use the same thing, or something incredibly similar, I'd be very very grateful.
View 9 Replies View RelatedI'm replacing this hard drive but all I get is a blue screen when I insert the original CD.
Info:iMac, Mac OS X (10.4.8)
I was wondering it it was possible to buy a LED display off eBay, and replace it with my LCD panel on my current Macbook (late 2006 C2D 2.0). There is nothing wrong the LCD, I am just curious as of whether or not it is possible.
View 1 Replies View RelatedI recently took apart my macbook to see if I could get my wifi antenna nudged to work better. It does seem to be fixed, but when I put the laptop back together the inverter cable shorted to the frame, smelled like burning electronics and stopped working. However, I put a new inverter in and it is not fixed. I was careful to note that the second inverter did not create any smell, but the screen did not even light up for a second. The LCD IS still working, as I can see everything on the screen if I shine a light on it. Except for no backlight, the computer works fine. What could possibly be wrong, and what are my options?
View 3 Replies View RelatedI am trying to upgrade my hard drive on one of the new MacBook Pros. MBP ships with an ATA hard drive but on NewEgg all the larger hard drives (400 - 500 gigs) are SATA. Am I limited to only ATA hard drives or will these SATA work as well?
View 1 Replies View Relatedmy 250GB HDD in my MacBook Pro but have been holding off for one big eason...iTunes. I have my iTunes library set up the only way i've ever done it. All my albums are playlists. Does anyone know if was to get an external HDD and make it a time machine, if it will save the playlists and files in iTunes, i know that time machine makes an image of your disc, but to what extent? I want to do this so i can just backup from time machine when i install the new HDD.
View 3 Replies View RelatedWas watching a 720p HD movie on a plane. Movie starts to freeze up. I can move the mouse but the rest of the computer is unresponsive. I force shut down by holding the power button.
Upon restart, all seems well, I login but computer quickly becomes unresponsive again. I force shut down again.
Next restart is over 10 minutes. Gets to login screen but can't login.
I boot from install disk and run HD repair. It finds some problems and repairs them. Reboot. Same symptoms.
I decided it is the HD and archive and install. Install fails. I wipe the HD cleaned and reinstall osx.
All seems fine as I go through set up and login in. A few minutes later same unresponsiveness.
So finally I did what I shouldve done awhile ago which is swap my current hd with my old one. I do and the computer runs fine! I'm at my wits end.
Just so everyone knows, the day before all these symptoms started I swapped my stock 2x1gb ram for 2x4gb ram. I originally thought that was the problem but I've had my original ram in since I've been trying to diagnose and it's made no difference.
i need to clone and replace my internal hard drive. it's 150 GB and almost full, so I'm replacing it with a Seagate 500 GB so I can upgrade from Os x 10.4 to Snow Leopard, and generally have TONS more space
I'm attempting to do the cloning in Disk Utility- I've got the new internal hard drive connected via USB right now, however when i select it as the destination, the 'Restore' option remains greyed out...
I imagine I need to format my hard drive, however I impulsively clicked 'New Image' and it began creating a disk image of the new hard drive...
My brother's MacBook's hard drive just died. He has a backup of all of his data. If I were to buy this, what do I do after installing the hard drive? We have the Leopard disks and everything.
View 5 Replies View RelatedI recently bought a MBA with the 128GB SSD. When at the store I launched Word on the SSD version as well as the SATA version and there was a noticeable difference so I decided to pay the extra $700 and go with the 1.86GHz with SSD model. I use this machine for development and my builds carry out file intensive operations that delete and generate a few thousand files (when I generate javadocs). My old Dell desktop from 5 years ago completed this operation in 90 seconds but my MBA takes 400 - 700 seconds. I did some reading and all indicators seem to point to the SSD being fast for reads but slow for writes. Is this correct? I'm not sure I can deal with this slowdown for much longer and I'm thinking a having my SSD replaced with the SATA drive. Will the mac store do this? or is there any less expensive option?
View 9 Replies View RelatedMy girlfriend's MacBook has some deep scratches on the bottom that a polish kit would not fix. I wanted to buy a new bottom cover and replace it for her. I have found quite a few on eBay, but I am not sure on which model will fit. She has the new white NVIDIA MacBook. I assume that because the motherboard is different, would she need a case specific for the NVIDIA model, or will an older Core 2 Duo case work all the same?
View 2 Replies View RelatedI am going to purchasing my Macbook Pro through the college student purchase program. I am planning to get the 17" 3.06Ghz 4GB MBP model. I am just getting the weak 5400 RPM hard drive because I plan to buy the Intel X-25M SSD.
I do have a couple questions that I hope can be answered here:
1. Are there any other apple rebates currently going on right now?
2. When replacing the SSD do I just drop it in and load up the OS? Or do I need to format it in a special way? Do I need any other connections?
3. Anti-Glare vs. Glossy, the age old debate. I will mainly be working inside and I will be working with graphic and code development. Which should I get?
I have a Macbook Pro 15.4" (Model: A1211). The LCD screen is broken and Iam trying to replace it. The original panel that came with the laptop was AU Optronics (BP154W01 V.1) with native resolution of 1440x900. Since I could not get the same panel, I ordered the LG Philips, LP154W02 B1 K2, model with a native resolution of 1680x1050.
Now, when I powerup the laptop the screen remains dark and the machine does not boot up. PS: With the damaged LCD connected, I connected the laptop to an external display and everything works perfectly.
I bought a Macbook 32 month ago and my sister's Macbook is 8 month old. I do some RAM eating tasks, and all she does is type, iChat, and research.
I do Photoshop CS4, Keynote, multitasking, and some games.
Well, the problem is, I have Intel GMA 950, and my sister has nVidia 9400m. She has 2GB of RAM and I have 1GB. And I know what you are going to ask me, and yes, these two Macbooks are the SAME MODEL, just bumped up specs.
Ok, story over, and here is list of what you can do. Please answer as informative or short such as 'yes' or 'no'.
1. Will I be able to swap Logic Board and RAM from two Macbooks?
2. Will it be possible to just swap the HDD AND RAM and me and my sister will be able to keep all the same data, and I will be able to work on heavy multitasking and some good games?
Title says it all. Is replacing the HDD normally a while you wait repair? If it helps, this is a unibody late 2008 15" MacBook Pro. Store I'll be going to is the huge one in Beijing.
View 6 Replies View RelatedI have a time machine backup on external drive.
I would like to:
1. clean install Lion on the new SSD (120 GB)
2. restore apps from my backup on the SSD
3. keep only data on the existing HDD
My questions:
What is the best way to make it?
Can I just keep the existing system on my non-SSD HDD, and after having Lion on SSD keep just data and delete the system libraries? Or is it better to format the whole disk and restore data from time machine backup (so it is not fragmented..
Info:
MacBook
Pro, Mac OS X (10.7.3), MacBook Pro 2010
I am going to be replacing the hard drive on a macbook pro that went crackle and fgave me the spinnign wheel of death before it totally went dead on me but i dont have the discs to reinstall the OS (and to be honest I forget what version it is) on this laptop but have the discs for my imac. Can I use these discs or do I need something else? I got this from a former roommate who upgraded to a newer macbook and was going to toss this so there are no discs for this macbook. Totally at a loss here....not sure if the data is recoverable from the hard drive so need to know what my options are before I take it in for repair tomorrow....
Info:
iMac, Mac OS X (10.6.8)
Does anyone know if its difficult to replace a Serial ATA Drive with a SSD? And if possible and not difficult, which specs should this SSD have?
Info:
MacBook Pro, Mac OS X (10.7.4), 2.9GHz Dual-core i7, 8GB SDRAM
I just replaced the hard drive in my macbook pro 2011 with an agility 4 ssd. I was able to copy all of the information over to the new drive. However ever time I wake the system up from sleep it freezes. I get the pinwheel. I am forced to restart the computer to get it working.
Info:
Mac Pro, Mac OS X (10.7.4)
I do a lot of traveling and have a lot of video files that I like to take on the road with me. I saw a 500gb Western Digital 2.5 hard drive on Amazon.com and want to replace my 160gb hard drive with it. I have an external hard drive with time machine. Is there anyway to do this so that I do no have to re-install everything?
View 6 Replies View Relatedmy friend has a macbook and the screen is cracked. Apple wants $800 to fix, so its not worth that route (its a older macbook). I was wondering if there is a site that has DIY kits for replacing macbook screens? I know they have them for iphones, so I just wanted to see if they had something similar for macbooks.
View 3 Replies View RelatedI just got the 2.13ghz 128gbSSD off of ebay (fnjjor a great deal!). Just arrived today and everything looks great - works great etc. I wanted to see the age of my mba and when I entered the SN into the apple support site - it says that apple needs proof of purchase that whole deal. Well I don't have a legitimate proof of purchase from an authorized site (need to ask the seller), but the MBA is 11 months old according to coconut battery.
1. Should I even get applecare? Hinges can be replaced out of warranty, and I have an SSD that is failsafe. Any other issue would probably be my own fault.
2. I should be ok purchasing apple care through the customer support number yes? I think I did that for a powerbook and was able to buy apple care for it (a 12" G4 no less!)
i have a macbook pro 13 mid 2010 which has got a liquid damaged board. The price of a new board + labour from apple is too much and the price of a new logic board from eBay is $1000. I am now thinking of replacing the logic board from the older unibody model which costs around $500. Everything looks the same inside but has anyone had any experience or knowledge of this actually working?
View 8 Replies View RelatedI have a Rev. E 15" MBP with the stock 250GB 5400 rpm HD. I'm getting close on running out of HD space so I'm looking to get a bigger HD. Is it a good idea to replace it with a 7200 rpm HD? Is the speed improvement significant? My MBP is my primary computer, I do a lot of general internet surfing as well as a lot of photo editing (I'm a photographer). I did some quick search and it looks like some HD's have bad vibrations? Does a 7200 HD drain out much more battery than a 5400 one?
I did a quick search at a local computer store and found the following, which one would be best to get?
The hard drive in my MacBook is turning 3 years old, and weird noises are being emitted from it, which means, the hard drive is on it's last legs. The stock Apple hard drive was an 80GB. Specs of the MacBook are in the sig. I was thinking to myself, why not take this as an opportunity to get a much larger hard drive for not that much money. So I came across this:
http://www.bestbuy.com/site/olspage....=1218030894682
Question is, would it fit the MacBook White from 2007, and how does it perform?
I'm thinking of getting a refurb MBP but they come with a 5400rpm hard drive and I want a 7200rpm. Does anyone about how easy it is to replace the internal hard drive in a MBP and how much it would cost?
View 5 Replies View RelatedI recently thought it would be a smart idea to volunteer to replace the failing HDD on my friend's Macbook (white, late '07 model), since she could get a higher capacity than 120GB this way, as opposed to getting a replacement at the Genius Bar. I went on ifixit.com, since I was able to change a couple of components on my 1st generation Macbook Pro without much trouble, and followed the guide step by step. Now, I am no rookie with this stuff. I even used to work at an Apple store, but as a specialist, not a genius. However, when I did everything (and it would seem that the installation itself was done properly), the computer screen would remain off once I booted the computer.
I tried changing it back to its original drive to see if I could at least get it to boot, but the same thing happened. Nothing on the display. I tried starting up while pressing C to run from the Snow Leopard disc, I tried starting up while pressing Option, I tried everything I can think of. I am running out of options and I have no clue what to do. Is there something I should have done before putting in the drive? Does anyone know what could be done, aside from taking it to the store and paying the $200 for an HDD replacement? (my former co-workers at the GB seem to be MIA for this).
