MacBook :: Replace Ata Hd - Difference Between ATA HD And SATA HD?
May 31, 2009
I have a Macbook white Early 09' (February) and apple says that it is a ATA Hardrive which I thought was ridiculous because almost all laptops have SATA Hardrives and some people on the forum talk about replacing there white macbook's hardrive which is a ATA Hardrive with a SATA Hardrive. I want to replace my 120GB ATA HD with a new one , but is it possible to replace a ATA HD WITH A SATA HD?, OR is there no difference?
I have a 13" MacBook Pro 2011, 2.3gHz, 320GB. What connector does it have? And would SATA still work with my laptop? One more question, what are the exact dimensions of the hard disk drive bay in my laptop, the manual only says 2.5".
I'm looking for a new HD to replace the original, now failing Maxtor drive in my G5 tower (1.8 Ghz dual processor, purchased in Aug. 2004), and have just about settled on the Western Digital Caviar SE16 series. It seems there are two types -- SATA and SATA II -- and I'm not sure about how to make a decision on which particular WD model to buy.
Will either type work in my machine? Or would the SATA II have potential compatibility problems? I read somewhere in these forums that someone with a G5 had bought an SATA II drive, and it wouldn't run with his system. (He said he had to reset some jumper switches to reduce the transfer rate of the drive ??, but now I'm told elsewhere that SATA drives don't have jumper switches.
Information: 1.8 DP G5, 1.5 GB RAM w/ Superdrive Mac OS X (10.3.x)
Im considering purchasing a higher capacity internal hardrive around the 750Gb/1Tb mark. However my macbook is the early 2008 model, and it seems the majority of hardrives are SATA II, having speeds of 3Gbt, which my mother board may not be capable of (apparently only 1.5Gbt) From researching and reading some reviews of others who have purchased internal drives on Amazon UK, some have had difficulty due to this problem, but have been able to fix the issue with a firmware update reducing SATA II drive speeds to 1.5Gbt.
Questions I have: Do all SATA / SATA II internal hardrives need a firmware update if replacing on to a new computer?(If so, would I need to look for a specific firmware update for the specific drive I intend on buying? And if you're in the knowledge would you mind posting links to these updates?)What is the process of updating the firmware i.e. would I need to put firmware on external usb hardrive 1st, then upload it to macbook after installing new internal drive (if it boots up my OS that is) etc. Would a 'hybrid' (disk+solid state) drive be compatible with a macbook as old as mine?Do I need to update my operating system to OS X Lion first, or can it be done after installing the drive?
my current laptop hardware:
Macbook Pro 15.4" (Early 2008 Model) Intel Core 2 Duo 2.4Ghz ProcessorGeForce 256Mb 8600M GT Graphical Processor Intel ICH8_M AHCI 1.5 Gbt MotherboardToshiba MK1655GSXF 160Gb 2.5" Hard DriveOperating System: OS X Leopard 10.5.8
Info: MacBook Pro, Mac OS X (10.5.8), 15.4" 2.4Ghz (Early 2008 Model)
I am now shopping for a new internal HD of MAC G5; previous HD died. I have decided on a Western Digital and was about to order one when I became alarmed by the SATA II listings. Is there a difference between SATA and SATAII that I should be concerned about the comptability? Don't want to get it and find out it doesn't work!
I'm having a hard time trying to pin down what type of SATA connector the MBA rev C is using for its storage.
I found this DVnation page that lists 3 possible rev. C MBA ssd upgrades, but it is only mentioned that the connector type is Micro-SATA. Does this mean that the Intel X18 is as of rev C also suitable for the MBA (or any other regular 1.8" SATA ssd or hdd for that matter)?
first time to this site. I am looking into upgrading my pathetic 100 gig HDD that came in my MacBook pro and was wondering if any SATA 2.5 HDD will work? I am looking at a 500 gig 7200 RPM but the ones I find locally say they work PC only. Thanks in advance!
Some of my investigations on how to get SATA working on my machine may be useful to Macbook Air users with the same chipset. This is a work in progress but is presented for your consideration on how to get a SATA interface where one hasn't been supplied.
1. Enabling ICH8-M SATA controller MacBook air Hacking - USB PORTS announced there was an unused SATA port on a MBA. This got me curious in finding and enabling a ICH8-M SATA controller on a HP 2510P with the same chipset. I succeeded in enabling the SATA controller to be visible in the OS. Relevant documentation on how to do this is here. All that remains now is finding the 4 SATA I/O from the southbridge pins on the systemboard, plus a 3.3V and GND (6 lines) and connecting it to say the Samsung SSD (below). I present this here so perhaps MBA ppl can do this too, and more importantly, identify if that is *all* that is required to get it working. Left: test pads from Macbook air southbridgeRight: SATA I/O pins on southbridge of interest2. Use the Sony SATA to ZIF AdapterPreliminary findings are here. Has a proprietory connector on the systemboard side though. Sony part number 1-878-429-11 as used in Sony Vaio P series.3. Creating a microSATA to ZIF adapterIf the native SATA controller cannot be enabled and it's I/O lines found, all is not lost OR the Sony adapter is too expen$ive, then could have a go at making this. The parts are rather inexpensive.
The 1.8" harddisk measures at 2.13x2.79in, we find this could potentially fit:Size of SATA to 3.5" IDE adapter: 2.13 in x 1.81 (size as given for 2-port version)Size of 3.5" IDE to ZIF adapter: 3.54 in x 1.30 Total: 3.54 in x 3.112 Size (shrunk) estimate: 2.13 in x 2.33 (removal of 2x~0.39 IDE connectors + more)I have *no* performance benchmarks to say how effective, or not, this would be but am awaiting feedback in those threads about it. More details, including source of parts, in thread titled For those with slow 1.8" PATA drives wanting SATA...
Followup If anyone has success enabling and using the SATA controller and/or creating the microSATA to ZIF adapter, please chime in on the threads above with what could be quite useful information to others in the same boat.I guess our platforms are the same (chipset) but different at the same time 1.8" SATA SSD offers a considerable performance boost to 20MB/s 4200rpm 1.8" HDD or 32MB/s 5400rpm 1.8" HDD.
I found a MacBook Air Rev. A 1.6GHz/4200rpm 80GB for 1299 at bestbuy, brand new, factory sealed. One could argue that I'm OCD, and I just can't stand the sluggishness of the eye candy in Leopard and cover flow chopiness (it isn't that bad really, but it just irks me.) And yes, I've enabled QuartzGL, and no I can't stand the tearing that occurs when beamsync is disabled.
with the new MacBook Pros (13" and 15" only) concerning SATA II and third party drives in many forums, such as the Apple Support forum and the OCZ forum:[URL] [URL]As I understand it, the first mid 2009 MacBook Pros supported SATA I speeds only. After many user complaints, Apple addressed the issue with a firmware update, but it seems the MBPs hardware has a problem with full SATA II speeds since many users reported issues with 3rd party drives after the firmware update.
i have a internal HD (WD CAVIAR) from an old windows computer that i decided i wanted to try to make as a EXT HD. so i got a USB to SATA connector that came with the power supply cable to the wall. so i plug in the connector in the HD then the usb into the computer then the power supply into the HD then the wall. then connector lights up and in system profiler it recognizes the usb to ATA bridge but disk utility doesnt recognize it. only once the HD showed up in disk utility but when i went to erase, a problem came up.
Im planning to get the MBA soon. But IF I were to buy the MBP should I go with the new advanced faster 128GB SSD or trusted slower and cheaper 500GB or 700GB SATA? What are the differences?Worth the $$$ of upgrade? I'm fine as long as it runs smoothe (as in not waiting for [URL] to load for 2 min.), and which one will LAST LONGER.
Looking at my system profiler, while there is nothing attached to it, it does report the presence of a SATA port. Is that correct? Can it ever be used with another internal drive?
To cut a long story short, I'n on my 4th June '09 MBP. Those darn SATA issues have caused freezing and beachballing on each of the MBPs.
I'm taking it back to Apple today for a full refund. I'm convinced this generation of MPS are all affected and I'm staying well clear.
I've been looking on the Refrub Store and this seems to fit my needs but will it also have the SATA issues?
Also, is there anything about this notebook/generation that I should be aware of? I want this to be the last MBP! (well, at least for a couple of years).
I have an early 2008 black macbook and would like to upgrade the HD to 1TB if poss, has anyone done this already or can you tell me which is the best HD to buy.
Does the late 2008 unibody Macbook pro have Sata II or III?I have an Apple branded 256GB SSD and It isnt booting up as fast as I think it could be. I am wondering if my logic board supports sata III because I think the SSD could be Sata II.
Info: MacBook Pro, Mac OS X (10.7.3), SSD 256 GB with 8GB of RAM
I upgraded to a 60gb SSD and also have a 1tb sata for the data. My problem is getting migration assistant to recognize the sata drive so I can transfer my user files from my time machine backup. I successfuly got the system and applications to my ssd in migration assistant. I also switched my home folder over to the sata with a guide I found on google. How do I get my user files to the sata if migration assistant can't recognize the drive.(drive is listed as internal in about this mac)
I'm wondering if it would be possible to fit an extra 1.8" sata ssd in my macbookpro 15" without removing the optical drive. This way i can keep my 500GB storage and move the OS to a 128Gb ssd. I was hoping to stick a 1.8" ssd on to my standard hdd. since the 1.8" is only 5mm thick. This would require a new sata cable from the motherboard to my 2.5" and to my 1.8" I'm not sure this exists. Does anybody think this is possible? or not?
So I was swapping some hard drives around in my 12-hour old 15" June Unibody MBP and apparently I broke the hard drive cable. More like I tore 3/4s than broke it. Thankfully I was installing a SSD into the optical drive so I'm still up and running, I just don't have the stock HDD in there as a data drive.
I saw something on eBay for around $50 - I'll have to open the MBP back up and see precisely what the cable looks like - I'm wondering if there's a store that'll have the piece I require? I'd prefer to not take it to an Apple store and have them void my warranty because the HDD isn't user-serviceable part.
I recently bought an SSD vertex 64gb for only 200$ cad. Unfortunately, I do not have enough space to install the Soundtrack Pro components on this drive. I recently bought too an eSata powered cable and a express card esata who came with it. The hard drive can't be detect on my macbook pro unibody late 2008 2,4" but runs. I install the silicon image drivers non-SL and adding over that the SL drivers.
[URL] In that case, I want to know how to uninstall those drivers from silicon image 3132? I thought about another thing if it really not work eventually. The dvd-drive bay could be remplaced by an enclosure 2.5" for my factory 250gb 5400rpm.
[URL]
Second question, Does this other hard drive will take a lot more power?
I have used an optical caddy to fit a SSD into my macbook pro along with the existing 500GB hard drive. My next ambition is to fit 2 hard drives and a SSD inside the macbook pro. My questions are:
1) Can I use a Sata port doubler (Do they exist?) to run 2 hard drives through one sata port. (The bandwidth is there) 2) Failing the above can I use a cable linking a sata drive to the airport express slot? (is it PCI express?)
I am looking to swap my mid 2009 15'' macbook pro 500GB 5200rpm hard drive with the new Samsung PB22-J 128GB 2.5" SATA-II MLC Solid State Hard Drive. Anyone have any advice or experience with this SSD?
I recently was forced to restart my 13" MacBook Pro with Lion OS. After the standard start up sound and gray screen the startup ceased. After multiple failed tries and attempts to use command-r I removed the hard drive and connected it via. a SATA to USB2 connector. I'm assuming since I can work off the HDD because of the USB adaptor it is not a HDD error but something else. Would a new HDD solve the problem?
