MacBook Pro :: Why Does USB Port Not Work

Jul 1, 2012

why does USB port not work o new mac book pro?

Info:
MacBook Pro, Mac OS X (10.7)

View 3 Replies


ADVERTISEMENT

MacBook Pro :: USB 2.0 Not Work On One USB Port 3.0

Sep 12, 2014

My problem is the following :

I have a recent MBP Retina 13' with Mac OS X 10.9.4 and two USB Ports 3.0.

Yesterday, I have plugged an old external hard drive (Seagate FreeAgentDrive >> USB 2.0 + alimentation).

I left it all the night plugged on my MBP. The MBP was off.

Today, the USB port used for the external hard drive don't detect the USB device 2.0. Only USB device 3.0. 

Any similar examples ? Any solutions ? 

Is it possible that I have broken the USB 2.0 connection ? 

Info:
MacBook Pro (Retina, 13-inch, Late 2013), OS X Mavericks (10.9.4), 2 USB Ports 3.0

View 2 Replies View Related

MacBook Pro :: Ethernet Port Doesn't Work

Jun 26, 2012

Brand new 2012 MBP 15":

Network system prefs recognizes that the Ethernet cable is plugged in but flips between unknown state an cable unplugged. Never gets a DHCP address. When the cable is unplugged, it stays on the unplugged status.  

As a note, I am having trouble getting Parallels to recognize any network connection at all, butmy immediate concern is the ethernet port. 

Info:
MacBook Pro, Mac OS X (10.7.4)

View 2 Replies View Related

MacBook Pro :: FireWire Port Not Able To Work With Audio Interface

Dec 28, 2010

I'm wondering if I somehow have a bad firewire chip in my MBP. It hasn't been able to work with firewire audio interfaces.

- I tried a Metric Halo ULN 2 which loses sync with it's audio. It will be fine for a few minutes with itunes but then becomes distorted and ringy as if it's lost it's audio sync.
- Random kernel panics while using Logic 9, Garageband 11 with an Apogee Duet - all software fully updated. One time it froze while not doing anything - logic was simply open and sitting there. Using iTunes through the Duet seems fine.
- Pops and crackles using Presonus Firestudio.

I've tried wiping my software and reinstalling everything. I'm using a MBP 5,3 2.8Ghz Core 2 Duo 4GB RAM, Snow Leopard (10.6.5) with the latest updates. I'm going to try an Apogee One which is USB, but I'd really like to use a firewire interface. If there's something wrong with my firewire port, I'd like it taken care of. My machine is under applecare 3 year warranty. I don't think this is an easy thing to prove though.

View 1 Replies View Related

MacBook Pro :: That Port Powers On USB Gadget, But It Doesn't Work?

Feb 9, 2010

My early 09 MBP just started having trouble with the USB port closest to the audio in/out. That port powers on my USB gadget, but it doesn't work. i.e. my mighty mouses laser turns on, but doesn't work. Anyone else having trouble with this?

View 6 Replies View Related

MacBook Pro :: Will Mini Display Port Work On A Mid-2011

Mar 28, 2012

Im looking to purchase a Mini Display Port to HDMI for a 2011 Macbook pro to connect to my TV, the only problem is that my macbook only has a Thunderbolt port, so would this work on it?  

[URL]

Info:
MacBook Pro, Mac OS X (10.7.2)

View 7 Replies View Related

MacBook Air :: Does Apple Remote Control Work On It Via IR Port?

Apr 1, 2012

I have the new 2012 Macbook Air 13''. I had heard there would be an infrared port so I can use my Mac remote control. I cannot confirm. Is this part of the 2012 Macbook Air?

Info:
macbook, Mac OS X (10.5.4)

View 4 Replies View Related

MacBook Pro :: Ethernet Port Doesn't Work In OSX But Does In Boot Camp

Nov 30, 2007

Been troubleshooting this one awhile...I even did an Archive and Reinstall....my Ethernet port on my 2.16Ghz MBP won't connect to anything. I get an IPv6 address when plugging into a router, but DHCP never works and a manually assigned IP doesn't work either. Reboot into Windows and it works fine...I've tried removing the Ethernet port, and have futzed with all the settings trying to reset it, but no dice. Problem started somewhere around 10.4.9, I think...I'm on 10.4.11...I reinstalled to .8 and worked my way back up...never works.

View 7 Replies View Related

MacBook :: Western Digital Passport 320gb Work With Usb Port?

Mar 8, 2008

I have a macbook 2.16ghz bought in June 07. Im wanting to buy a western digital 320gb external drive, which is supposed to be powered by the usb port. I read somewhere it takes 600 MA to power it, and someone said it took 1000MA to power it. In system profiler it says my macbook's usb supports 500MA, which really surprised me since its a pretty new computer. My question is if anyone has a 320gb passport drive on the same generation macbook i have that works. Or if you need a y cable to do it.

View 17 Replies View Related

MacBook Air :: Enclosure For A 2.5" Sata Drive Which Work From One Usb Port?

Mar 22, 2010

I have an old laptop hd which i have in an enclosure. The problem is the enclosure uses a Y-usb cable (think thats what its called - the cable that plugs into 2 usb ports on your comp) - you see where i'm going?!

Anyone know of an enclosure for a 2.5" sata drive which will work from just one usb port so i can use it with my soon to be macbook air?

View 3 Replies View Related

OS X :: Connecting Macbook To Projector - Even With Mini Dvi Port It Doesn't Work

Apr 14, 2010

There was another thread on this that I found via Google, but now I can't seem to find it again. I have to occasionally hook up my Macbook (not a Pro) to various digital projectors at different companies. I bought the $20 attachment thing. I brought it in and have not been able to get any projector to recognize it at all. This is on several different projectors. I try hooking it up both before and after turning the computer on and it doesn't work. I went to "Display" in System Preferences but there is nothing there about changing the display (to "dual" or "mirror" or anything), it just says "Color LCD" and some preferences about size, bits and stretching. There are no tabs. The worst part is that I teach at a lot of tech companies, so the people there should all know how to fix it, but...1.) can't read English that well, and my Chinese is OK but not *that* good, and 2.) they all use PCs. Macs are like aliens to them. So they can't fix it either. The manual is worse than useless.

View 8 Replies View Related

MacBook Pro :: Mini DisplayPort To VGA Adapter Won't Work On Thunderbolt Port

Jul 3, 2012

I bought 2 new Macbook Pro 13' , 2.9 Ghz Intel Core i7, with 8 Go 1600Mhz DDR3,  Intel HD Graphics 4000 512 MB, Mac OS X Lion 10.7.4 (11E2617). 

I have connected a Mini DisplayPort to VGA Adapter in order to show presentations on different LCD projectors but  no image appear. 

The external monitor is detected but no image is shown. I have tried to change the frequencies: parts of the screen appears but no a correct image. I have the same symptoms with the 2 Macbook Pro. Using old Macbook Pro with the same Mini DisplayPort to VGA Adapter, the slides are showns normally. 

I make a test with a Mini DisplayPort to DVI Adapter and with a Mini DisplayPort to HDMI Adapter and everythings works correctly with both adapters.  

Info:
MacBook Pro, Mac OS X (10.7.4)

View 14 Replies View Related

MacBook Pro :: NEC LCD2690WUXi & Mini Display Port To Dual DVI Doesn't Work

Jan 25, 2010

I purchased the apple mini display port to dual-link dvi adaptor and a dual-link dvi cable. The 2690 display now "lights up" but I get constant partial screen flicker and flashes.

View 5 Replies View Related

Mac Pro :: Ethernet Port 2 Doesn't Work

Sep 16, 2009

Internet, file sharing and screen sharing all work on Ethernet Port 1. None of these work on Ethernet Port 2. Would anyone happen to know how to fix this problem?

View 2 Replies View Related

MacBook Air :: Macbook Air Usb Port Don't Work Well?

Dec 18, 2009

last day my macbook air usb port don't work well... I don't know how but if I plug a mouse, pendrive, usb hd the light on the devices is on... I think it's must be ok... BUT I can't use... no mouse no pendrive no superdrive nothing on my desk I don't see nothing.

So I called the apple center near my city and he said that I can try the PRAM
reset... well... but the situation not change... how appened? my air
is never fall down...

View 4 Replies View Related

Intel Mac :: Firewire 400 Camera Doesn't Work With 800 Port?

Jun 26, 2012

I have a firewire 400 camera that i'm using for a project and one firewire 800 slot on my iMac (Late 2009). When I plug the camera in, nothing responds no matter what I do - tried resetting the PRAM and SMC. Compare this to my older iMac (Late 2007) which has both firewire 800 and 400 ports. I plug it in and it pops up using the underlying Quicktime controller api on either the 800 or 400 port no problem. So I figured after trying to install a firewire camera library (libdc1394) which I need for my project which didn't work, that it must be a hardware issue, so I took it to the Apple store. The genius at the store booted the OS (Lion) from a firewire drive via 400 to 800 cable (no external power to the f/w drive was used) and then using the spare 400 slot on the hard drive, he plugged (daisy chaining) in my camera and it loaded! So this suggested 2 things - my OS is corrupt or my card can't read straight from my device but why a hard drive in between would change this is beyond me. I came home and installed OS X on to an external USB hard drive and loaded up from it - so this is a fresh version of Lion, there should be no software issues. Plug the camera in to the I/O board of the iMac but load the OS from the external USB hard drive - nothing happens, the profiler doesn't detect anything at all. On a side note, I installed XP and Ubuntu Linux and they also can't detect it, which further suggests its the device or I/O board when interfacing directly with this camera. I've tried providing the devices with external power, daisy chaining 2 cameras, using a usb hub....nothing works. Just for good measure, I tried to boot Lion off the external USB on my older iMac and again, it worked no problem, which to me really narrows it down to the hardware. 

I feel like perhaps the port is a bit dodgy and when the genius daisy chained it, it worked better, but no idea why. Someone said I should get a firewire 400 to usb adaptor

View 4 Replies View Related

MacBook Pro :: Remove Ethernet And Mini Display Port And Insert HDMI Port?

Aug 11, 2009

How many of you would like to see a HDMI Port? Why the miniDisplay port? Why not remove ethernet jack and miniDisplay port and replace it with a HDMI port. That way one HDMI cable feeds digital video AND audio. Am I the only one thinking of this?

View 22 Replies View Related

Mac Mini :: 27inch Display Port To Dvi Adapter To Pro Doesn't Work

Oct 30, 2009

I just bought the 27in iMac to hook up to my Mac Pro till apple refreshes their ACD. I thought I would be able to use the Mini Displayport to DVI adaptor to connect it to my Mac Pro through DVI and it doesn't work. I know you can do it with mini displayport to mini displayport although, both my mini displayports are currently in use by by 24 ACD.

View 4 Replies View Related

Intel Mac :: Make Work The Mini Display Port In The It And The HDMI?

Feb 13, 2012

Does anyone know how to make work the mini display port in the iMac and the HDMI port with AT&T U-verse cable box?

Info:
Mac Pro, Mac OS X (10.7.3)

View 1 Replies View Related

Hardware :: Can AirPort Extreme Work Via Cat5 Ethernet Port Within Network?

Dec 11, 2009

Can my AirPort Extreme work via a Cat5 ethernet port within my network? I ask because we've had no luck doing this where as our older Airport Express works just fine this way. Thoughts? We upgraded to the Extreme to extend the signal (and have 2 antennas) and trying to avoid hooking it up to the cable modem box which is even further away than where the Airport Express was located.

View 3 Replies View Related

IMac :: PS3 / Mini Display Port To HDMI Adapter Work With Audio?

Jul 30, 2010

Can the new iMac's display full 1080p + audio with a simple Mini DisplayPort to HDMi, from a PS3?

View 2 Replies View Related

Intel Mac :: USB3 Cable CF Card Reader Will Work On USB2 Port?

Mar 11, 2012

Just wondering if a USB3 cable CF card reader will work on on my USB2 port on my old Intel 24" white iMac?

Info:
24" iMAC

View 2 Replies View Related

Mac Pro :: Does Mini Display Port To Dual Link DVI Adapter On 4870 Work Correctly?

Mar 23, 2009

Has anyone tried hooking up a two 30 ACD's to a 4870 on their MP.. just want to check if there are ANY issues with this setup.

[URL]

View 24 Replies View Related

Intel Mac :: Thunderport Does Not Work With HDMI Port On Samsung Synch Master P2350?

May 10, 2012

I have the new iMac 21.5 Inch with a Thunder Port connector that looks like a mini display port. I have the adapter from Apple that includes the mini display port and converts that to a HDMI Cable to my Samsung Synch Master P2530. The monitor cannot be recognized my the iMac. This monitor worked with my older iMac and it's large display port which adapted to HDMI.
Info:
IMac, Mac OS X (10.6.3)

View 1 Replies View Related

MacBook Pro :: Mix USB 2.0 And 3.0 On Same Port Is Whole Port Slowed Down?

Jul 3, 2012

I have just ordered a new MacBook Pro and it does not have enough USB ports for my needs.If I have a USB 3.0 hub and I mix USB 2.0 and USB 3.0 peripherals on it, will the whole hub/computer USB 3.0 port be slowed down to USB 2.0 speeds?I am thinking back to Firewire, if you have Firewire 800 and 400 devices on the same chain, the whole chain slowed to Firewire 400 speeds.I don't think this is the same with USB but wanted some reassurance..

Info:
iMac, Mac OS X (10.7), MacBook Air, Mac Mini

View 7 Replies View Related

Intel Mac :: Target Display Mode Does Not Work With Mini Display-Port Cable

Mar 5, 2012

I want to buy the 27" iMac - but only if I can use it as external monitor for my Lenovo laptop when working from home. A the Apple store in London they said that this is possible with a Belkin converter from hdmi to mini display port (with a USB power caple to turn it into an active signal). The laptop also has a displayport.

Info:
iMac

View 3 Replies View Related

Hardware :: Time Capsule Port Forward Not Working - How To Do Port Forwarding

Nov 22, 2009

I am having issues with my Dual Band 1TB time capsule for some reason the damn ports won't forward I have enabled the correct settings with the ip address and the ports, but when I use a program to test if the ports are open they are always closed, regardless on pc or mac. Does anyone have a solution to this? I even reset my Time capsule to see if it would work, but no luck.

View 1 Replies View Related

OS X :: Open Port / Port Forward Leopard Bizarre?

Jun 29, 2009

Here's the deal, I am so frustrated. I am trying to open port 59152 for Transmission on my Macbook Pro. I have the latest releases of everything, I am using an Airport Extreme base station with an older airport to boost my signal/connect my tivo w/out a wireless adapter.
I have managed to get it open in the past but there was an update or something a month or two ago and at first it was still open and then it closed. I don't know what changed with the update, all I know is that I did n't change anything.

I have granted permission for Transmission to accept incoming connections on the firewall, little snitch allows it too. I have lighthouse, which worked at first but now I don't even know why I bother having it run. I have the port mapped through the airport utility.

PLEASE don't say to go to portforward.com because they haven't updated the Airport section since Leopard came out, yet every search I do someone repeatedly tells the person needing help to go to [URL]

I am going to attach some screen captures so you can see what I've got going on and maybe point out something I've missed.

View 4 Replies View Related

MacBook Pro :: Mini-display Port Versus Mini-DVI Port

Mar 16, 2010

Relevant newbie to the mac world. I have a MBP late 2009. I bought a third party Mini display port to HDMI converter so I can hook the MBP to my 46" Samsung screen.

This works fine, no major issues here. However the picture is not great. I compared watching a standard definition TV show through the MBP then burnt it onto a DVD. The DVD (using the PS3 as my DVD drive, connected via HDMI) had superior quality than through the MBP.

Also the picture does not quite fill the screen. There is a small black border running all the way around the screen. Does not sound significant but when doing the same comparison as above, you notice the difference when via DVD the movie fills the screen. I have played around with the resolution settings. Those that fill the screen chop bits of the mac desktop off, so thats no good either.

So I am wondering why this is? Is it because the mini display port is not a DVI port, hence I am not getting true HD quality picture? How can I overcome this if at all. I'm thinking of getting a mac mini as a media hub/HTPC but want to ensure I dont encounter the same problems.

View 9 Replies View Related

Hardware :: Adapter Can Be Used With Both A Usb Port And An Ethernet Port

Mar 21, 2008

is there a adapter with both a usb port and an eternet port?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved