MacBook Pro :: Unable To Connect Beats Studio Wireless?
Sep 2, 2014unable to connect beats studio wireless
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
unable to connect beats studio wireless
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
Airport sucks. A lot. It works just fine in WEP or unprotected networks, but WPA-PSK it doesn't do a damn thing. It shows it as connected with a full signal, but Safari, iChat, etc... won't connect to the internet. For some reason Azureus works, but it's going at an amazing 146 bytes/sec and then back down to 0. What's going on here guys? This is my first Mac and I am sorely disappointed in Airport.
View 11 Replies View RelatedI've been trying for a bit as I've just installed my boot camp partition, and it seems neither device will connect to the computer.
View 3 Replies View RelatedI took it out of the plugged it in. Turned it on. The airport refuses to connect to my wireless network. The exact same network my G5 connects to fine!
View 14 Replies View RelatedI am trying to connect my new iMac (Leopard OS) to a PC running Windows XP Home Edition using the wireless router. I have the PC connected to the internet via modem/router (supplied by Aliant, the SpeedStream 6520). I have been able to "get on" the internet with iMac using the wireless router. However, I can't get the PC and iMac to connect together over the wireless router inorder to share files etc. On the PC side:
1) I disabled the Windows firewall
2) have set up and named a sharing folder
3) have set up a "work group" name
4) believe I have the correct user name and password
5) not sure about the "network" name, (?SSID) information.
6) have a # with several periods in it that I don't know if this is the computer ID, IP address, or one of the above items, or if they are all one and the same.
On the iMac side:
1) have the IP address of the iMac
2) I have tried "connect to server" but am unable
3) I have never been able to see a "shared" section on the left side of the finder screen.
I have read the thread by "edesignuk". However I did not "put your mac in the same workgroup as your windows PC" as I couldn't find the correct screens on the iMac, and also in phone discussion with Apple help they said they had never done that and advised against it!
I was happy to get my mac pro yesterday, but upon setting it up, I couldn't get it to connect to my network. When I clicked I the airport logo and the top right, it said airport was on and I was connected to the network. However, when I opened up Safari I got nothing...just a screen that said something like "you are not connected to the internet." The last time I had a macbook, I turned it on and bam, I was connected to the internet right out of the box.
After trying to fix it for 30 minutes, I decided to reset my modem/router. After doing this, the macbook connected to the internet for a few hours and I went to bed. Now I come home today and it works for about 30 minutes and then stops working. Keep in mind, my PC is working flawlessly so I know my network is up and running. After about 30 minutes, it connects again...and then stops working again. Very frustrating. As I type this message, it still wont connect to the internet even though the computer says I'm connected to the network.
Another thing that makes me think there is a hardware problem is that the macbook wont connect to my wireless printer. I've installed the software 2x and right after going through the install procedure, it will print for about one minute and then it does nothing - I get a message that says something like "your printer is not on or not connected to the network." So then I went through the steps of connecting it again and again. Every time it would ask for the password to the network so I put it in and it says I'm connected....but nothing will print. After the 3rd time, I was finally able to make it to spit something out wirelessly from my macbook...but 5 minutes later it's back to saying my printer is not on or connected to the network. This is weird because initially it works and then it stops. During this whole procedure, my PC recognizes it just fine and prints within 5 seconds. For some reason the mac just wont do it.
I thought macs were supposed to just work, but this laptop has been more frustrating than any PC I've owned. Here I am with a new macbook that can't connect to the internet OR my printer. Granted, I know very little about computers so maybe I'm overlooking something simple.
If it's a hardware problem, do you think Apple will refund my money?
I installed XP, via BC, on my older 20" iMac, and I keep getting an error message when trying to connect to my wireless network. My network shows that it is available, with full signal strength, but as soon as I try to connect to it, I get an error message saying that it may be out of range, and I should refresh and try to connect again.
View 1 Replies View RelatedI've just purchased a Power Mac G4 desktop type of computer from a friend of mine. I've asked around and I was told it wasn't able to connect to a wireless internet connection inside of my house.
View 3 Replies View RelatedI am using Windows 7 with boocamp. Just suddenly without changing anything windows 7 stopped recognizing my battery, and is unable to connect wireless. It just gives me an unable to connect error, no more information is given. I found someone on an other forum with exactly the same problem. [URL].
View 4 Replies View RelatedWhen I moved in there was a USB ADSL modem so I replaced it with a Belkin 54g modem router. I followed the belkin set-up cd and have a network up and running. Initially I could connect and browse wirelessly without problems. Then I got a few "timeouts" when trying to connect, that seemed to go away but now I connect with the password, full signal shows for a couple of seconds then it seems to disconnect and I can't browse wirelessly. All through this there have been no internet problems if I go 'wired' with the ethernet cable.
Is there anything I can try? When attempting to use wirelessly I've been in the same room as the router, no more than a couple of meters away. Is it a problem of G routers instead of having N?
Suddenly am unable to connect my wireless mouse and trackpad ... The Bluetooth option is also missing ... Am running os x with all the latest updates ..
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.4)
i want to connect old Apple Studio Display 21 or 20 i think to my macbook is it possible it has (Apple Display Connector) (March 20, 2002) 20", matte, LCD, 1680 x 1050 and my macbook is 2.1 core2duo 2006 how can i do it i have to by some sort of special cable to do this or its is not possible
View 1 Replies View RelatedIs there an adapter available to connect my old (2002!) Apple Studio 17" monitor M7649ZM/A to my new MacBook Air?
Info:
MacBook Air, Mac OS X (10.7)
I have five Macs in the house, all of which can see each other on the local wireless network...but...for some weird reason, none but when they try to connect, I get �Connection Failed� after several minutes of silence.
When I click �Connect As...� in hopes of getting a login screen, nothing happens at all. Nada. Zilch. Zip.
The sharing settings on the MacBook are identical to the ones on the other five. Of course, the MacBook can connect the other direction to everyone, including my brand spankin� new MBP.
Any clues, oh wise ones? I�m stumped. What is it about getting into a simple MacBook that has two G4s and two MBPs scratching their heads?
I have a dual band time capsule working wirelessly with 3 macs all intel (24 iMac, mbp 13, mb 13) with no issues. I was trying to connect a 17" flat panel G4 to the same wireless network on the time capsule and it fails to see the network.
When I type in the network name and password (WPA) it comes back with "encryption method not supported by the wireless network". Although all the others macs are working on this same network using the same encryption, the old iMac refuses to play nice. Is there something else I've overlooked?
We have a PC in the upstairs office with cable/DSL router for Internet (through Comcast). This service also has a wireless connection. We have a Macbook laptop which connects effortlessly to our home network and we use it all over the house. We simply clicked the internet symbol on the top right (looks like a little amphitheater), selected out network, entered the password and have been connected ever since.
Today we brought home a new iMac and set it up in basement office. Tried the same routine. Clicked on the internet symbol, selected our network, noticed that the signal is just as strong as it is upstairs, typed in password but that's as far as we get.
I've gone the rounds with the Assist and the Utility features. I've shut the Airport on and off. I've tried setting up a new network. I do notice that the iMac has a "self-assigned" ISP "and cannot connect to the Internet." Does this mean I can't ever connect? Do we need to replace the self-assigned ISP with our Comcast IP address?
I've read here and there that our router might have Macs blocked and we could add this iMac as a secure system to get on the network. But we haven't played with the router's settings because we wouldn't know how. Besides, the Macbook connects fine.
Does this have anything to do with TimeMachine?
I bought a G3 Clamshell Ibook today and I don't know how to connect to the net with it. So I did some reseach (btw I know nothing about Mac's nothing at all. This is my first one!!) and there is something about an Airport card. So my question is how do I check to see if my computer has it. If it does then how do I access the net.
If not, please, please tell me there is another way to get wireless on the thing cause I don't think I can install a wireless card on a computer. I would not even know where to begin.
I have a blackbook (intel core 2 duo) and I can connect to my landlord's wireless network (they have a netgear wgt624) but I can't actually use the web (Safari or Firefox will just "think"). I've tested the diagnostics and it confirms that my mac can connect to the network, but it cannot connect to the internet. The network uses WPA personal and it has a 19-aphanumeric passphrase.
*Also - would it be possible for me to extend the wireless range (and make it possible to browse the web) if I used my own 2wire wireless modem to connect to the netgear wgt624?
I have recently been in the market for sudio monitors for my Mac. I've narrowed it down to the Yamaha HS5. Ideally, I would have to of them. I would like to know how they would connect to my iMac since I've never dealt with studio monitors before. Would I need a quarter-inch jack? Would I need adapters?
Info:
iMac
i just recently purchased a pair of dr dre beats, the studio version, and as some of you may know, they include a black cable with a mic attached to it. i was wondering if there was any way to use this mic on the macbook pro 15" (2010 model) and use it for gaming. i cant seem to find a way to make the mic work.
View 11 Replies View RelatedI don't know what's wrong with it.My ipod touch connects just fine and yet when i try to connect my new macbook it won't allow me to connect.I've never owned a macbook - so i have no idea how to fix this.
I currently have the network setup assistant running and configuring - but it's been about an hour and it hasn't done anything.Is there something else i need to do?
I have a 15" 1st gen UMBP and I've been having some issues with the sound. At first I thought I had blown my speakers, but it was such that I couldn't tell if I was just imagining it or if they were actually blown. Some of the beats and bass were kind of fuzzy and subdued. I had resigned myself to the fact that my speakers were blown and went on with my life, figuring I would get it checked out sometime. Then, last night I tried to listen to some music with my headphones (nice sennheisers) and it was clear that the bass was blown. At first I thought I had also blown my headphones, but then realized that it was probably my sound card (I don't know too much about sound cards).
I tested my headphones using my roommate's laptop, listening to the same songs and switching my headphones between computers, and it became clear that my headphones were working just fine and could handle deep bass and beats as normal. So: I'm pretty sure this means that the problem lies in my soundcard, leaving me with a couple questions:
1) How expensive of a fix is this going to be?
2) would a faulty or damaged soundcard be covered under apple's limited one year warranty?
Can't log and capture hdv footage (on dv tape) using Firewire into FCP 6. Keep getting message: Unable to Initialize Capture Device.
Went to easy setup and I think I got that right and matching my camera setting (HDV 30p). Not sure what I'm missing.
Info:
iMac, OS X Mavericks (10.9.4)
So about a couple of days ago, out of the blue my 15 inch macbook pro stopped connecting to my homes wireless network
i ran techtool deluxe and it said that my volume structure test had failed so i googled what to do and i came up across a couple threads saying to use the fsck -y command after booting up into single user mode
so i ran that twice and ran techtool again. this time everything passed however i am still unable to connect to the internet
but connecting via ethernet is working fine. airport is detecting my home network fine the only problem is whenever i input my password to join it, it fails
I have a Macbook Air Rev.C 1.86GHz and just yesterday, it stopped connecting to my D-Link wireless router. There have not been any updates applied to the router or the Mac recently, nor have I installed any apps to the Mac either. My iPhone sees and connects to the router fine, as does my MSI netbook, and my TabletPC too. I have turned the router off numerous times in trying to troubleshoot this, and only for a minute or two, does the Mac see the router and connect getting an IP. It then loses the connection shortly after. I have turned off the Mac's Airport a number of times, I have reset the SMB (I think, using the ctrl/shift/option/Power button while off, letting go, then pressing the Power Button only).
View 3 Replies View RelatedI have a Casio (XJ-A240V/XJ-A245V) data projector, and I'm trying to connect wirelessly with a MacBook Pro (10.6.8). I see the projector in my Network wireless connection menu as "casiolpj_default1." The projector's LOGIN CODE is four digits, but the Network settings on my laptop must contain a minimum of eight characters. I've also tried connecting to the projector's Server IP address via computer to computer. I can join, but no projection. The projector is set to Wireless Input. I have clicked "detect monitors" on the MacBook. No further info is available in the projector manual.
Info:
MacBook Pro, Mac OS X (10.6.8)
I can't connect to ethernet or wireless. My wireless and ethernet works perfectly on other devices except my macbookpro.
When I plug in the ethernet cable and connect to my wireless, it says that i am connected, but internet doesn't work.
Info:
MacBook Pro, Mac OS X (10.7.3)
I've been using my MacBook to connect to the Internet through my Linksys wireless router around three years now. While I've had more than my fair share of problems between my MacBook and my wireless router, recently, things seems to have been going fine. While my wireless router needs a restart at least once or twice a day, I haven't had any major issues with it until a few weeks ago when my MacBook refused to connect to the network. It suddenly started working again two or three days later and I haven't thought about the issue until yesterday, when my laptop has again refused to connect.
When I login, the Wi-Fi searches for a Wi-Fi network and eventually connects to mine with the error 'Alert: No Internet Connection' in the menu. It can connect to my phone's wireless hotspot fine and all other devices in the house can connect to the network fine.
Info:
MacBook, Mac OS X (10.7.3), Early 2009
When I take my macbook to work it connects to the wi-fi but won't open up the page. It is like it is blocked for some reason. How do I reset the security or unblock it?
My work has an "agree to" page and I don't know if that is what is doing it or not..
I have a MacBook Pro that I have had from about 3 years now. It's been great but earlier this week, it wasn't able to connect to the internet here at my school (college). I didn't think too much of it because my schools internet is always spotty and goes down from time to time. Yet when I go on to my computer tonight nothing I do with my airport or computer will get my webpages to say anything other than "Server not found". I tried turning off my airport then back on and reselecting my network because usually that helps. It would say it connected and I would have full bars but still the same error message. I tried again, and when I did it this time, I did it from within the system/network preferences. When I did this, I watched the connection of my airport go red, then I would connect and it would go to yellow saying I had no IP address.
I would then sit and wait and eventually it would fully connect giving me the green go-a-head. But, again when I would open up my internet, I would get the "Sever not found" message. I would then quit my firefox all together and tried again that way and still same massage. I restarted my computer and tried again...nothing. I became more concerned because my roommate could get on the internet just fine and I could use the wireless in my room through my phone. I was consered that now this was a matter with my computer and not just the internet, so to make sure I got out my ethernet cable and hooked it up with my connection in my room.
Info:MacBookPro, Mac OS X (10.5.8)