how to use my pcpower needed software programs, since i have many essential ones and esp a game close to my heart, is there a way to make it work after this mac 10.7.3 software update, or should we just wait and hope they make it supported by the next version?
Info:
MacBook Pro, Mac OS X (10.7.3)
'You can't open the application Window Media Player because Power PC applications are no longer supported'. What do I do?
Info:
MacBook Pro, Mac OS X (10.5.8)
Upgraded my MacPro 2 x 3 GHz Quad-Core Intel Xeon to Lion so that I can take advantage of icloud functions that apparently won't work with my present OS. I did a clean install of the Lion OS, and began to selectively reinstall application programs. I inserted the install disc for my Logic Studio Application, an application which was not cheap, and I am met with the above message when I try to install the software. (Actually, "you can't open the application LogicStudio.mpkg because powerpc applications are no longer supported")Under the system requirements, I find my machine within the guidelines. Also, this software worked fine on this mac machine when I was running the Leopard OS. What is "PC" about my Dual Intel processors?
View 14 Replies View Relatedthe graphics processor on my computer broke so i had to pull files off using the firewire system to connect two computers and when i went to open the address book this appeared "cant open application address book because it is not supported on this architecture".
Info:
MacBook Pro, iOS 5.1
I just updated iPhoto and received the attached message when I try to open iPhoto. "You can’t open the application “iPhoto” because it is not supported on this type of Mac". How to resolve this.
Info:
MacBook Pro
I am trying to download a program for a online course that says it is mac compatable with a Macintosh OSX 10.2.8 or higher, but when i run the application it says that Mac is no longer compatible with PowerPC applications. How can I run this program?
View 2 Replies View RelatedI know Maya is little buggy under MacosX. so which other alternative or majority used application for mac? Also why like FCP Apple not releasing any 3D software ?
Info:
Apple safari, Other OS
when i put campridge's CD for toefl practicing. It says " becaus power pc applications are no longer supported".
Info:
Mac Pro, iOS 5
i've been trying to download cds for my RN review but keep on telling me "You can't open application because PowerPC applications are no longer supported" but all of this was the latest versions cd?
Info:
MacBook Pro, Mac OS X (10.7.4)
My old printer died and when I tried to hook up a new printer, it would not work. I contacted Apple but my "legacy" machine was no longer supported and I needed to pick a machine that is (was) supported. Is there a list of printers I can find that will work with my legacy machine?
Info:
Power Mac G5
I'm running 10.7.3 software, but im trying to install a program but every time i try to stall it.. this comes out '"You can't open the application Diablo Installer because the Classic environment is no longer supported."I was wondering if i could buy or download some type of program to run a old system...
Info:
iMac, Mac OS X (10.7.3), help me...
"You can't open the application CanoScan Toolbox X because PowerPC applications are no longer supported."This message pops up when I click on Canoscan Toolbox
View 5 Replies View RelatedSince I have osx lion, kids can't play games because power pc is no longer supported. hat can I do?
Info:
MacBook Pro
A lot of people have been affected by the problem - the change to Lion OSX has left them stranded because Power PC Applications are no longer supported. I don't understand firstly why Apple has done this. There are thousands of software programs in use by their customers and suddenly these don't work. As these are programs used by students, teachers, employers and employees this seems quite senseless to leave everyone high and dry.
Info:MacBook Pro, Mac OS X (10.6.1)
I have been just bought new pc & just transfer my backup files to my new apple pc & just need to konw. I just my transfer company's data from my pc to apple pc but I am not able to open any flesh player. I just want to use few links & because my site is web design company I have to see so many things reagrading flash & just want to work on with great resolution which I can only get it from apple.com.
Info:
Mac OS X (10.3.x), i got the problem with 10.3.1
power-PC applications are no longer supported
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.4)
I've just got a Radeon 9600 Pro PC/Mac edition, as the 9600XT that came with the G5 died on me last week. It's taken an age to get it working, I could only boot in safe mode, in the end I deleted all my existing ATI extensions, installed the ATI Displays 4.5.7 and it works. BUT ... (and it's a big but)... performance is VERY slow and System Profiler says Core Image and Quartz Extreme are not supported. If anyone's got any ideas I'd be most grateful.
View 26 Replies View RelatedRecently my MacPro has been giving multiple errors that I can't open a particular application because PowerPC application are no longer supported. It references an application that I don't have on my computer and I'm not trying to open. I keeps listing the error over and over. Last night it listed it 88 times before I woke up this morning. They list one on top of the other running down from the middle of the screen to the right lower corner and then pile up there. I don't know what to do other than erase the drive and reformat and I really don't want to do that. I'm attaching a screenshot.
This shot shows 8 repeats in about 4 hours one day last week. This started about 3 months after I installed Lion, and I haven't installed anything else since I upgraded to Lion.
Info:
Mac Pro (Mid 2010), Mac OS X (10.7.3), Tons of ram
I recently installed a Pioneer DVR-112D in my PowerMac G5 (10.3.9) after my original optical drive stopped reading DVDs. This new drive now reads previously burned CDs and DVDs just fine, but gives me the following message when trying to burn blank CDs and DVDs: The disc could not be used because the disc drive is not supported. Error code 0x80020025.
Information:
PowerMac G5
150gb internal drive, 512mb ram
I am trying to back-up my computer to my external hard drive and a box is popping up saying "You can't open the application WD Backup.app because PowerPC applications are no longer supported." What does this mean? I have updated my system to Lion since my last back-up. What do I need to do?
Info:
Mac OS X (10.5.6)
I have a sign being advised Power PC Applications no longer supported when I try to go into Microsoft Word, Excel, Entourage & MSN Messenger, hoe do I resolve this?
Info:
iPhone 4
After OS Lion installation pre migration to iCloud, I can't access Word or Excel - greyed out no entry sign and error message when try to open. "You can't open the application Microsoft Word because PowerPC applications are no longer supported". Didn't see any warning of this pre-installation. Didn't see any warning of this pre-installation. I paid for these two softwares and use them daily on my iMac. Need an urgent fix to access previous files. Any solutions to install a fix perhaps, and then re-install the software from my back up? Plus any Apple solutions to no longer having iWeb?
Info:
iPad3, Other OS, iPad3 compatibility issues
Since downloading Os XLion I can nol longer use the above Scanner. "application Photostudio cannot be opened because powerPC applications no longer supported." Are there any fixes?
Info:
Apple TV, Mac OS X (10.5.8)
what other formats or apps can i now word processand cut and paste photos on ?
Info:
24 inch imac, Mac OS X (10.6.4)
I lost my iweb and had order replacement DVD from apple after talk with support team. When I install its say "you cant open the app installing mac os x because power pc app o longer supported"
Info:
MacBook, Mac OS X (10.7.3)
After installing the new Lion OSX, I get "power PC applications no longer supported" on things. How to fix?
Info:
iMac, Mac OS X (10.7.4)
I just upgraded to Lion on my MacBook and can't open any of my FileMaker Pro files. The message says "Power PC Applications no longer supported." I am dismayed. What have others done?
Info:
iMac, Mac OS X (10.6.8), Lion Upgrade
I have a G5 Quad with an Ati x1900 graphics card running into a 52" Samsung LCD. This was working fine through a dvi-vga adaptor until I switched the monitor resolution from 1920X1080 to 1360X768 which is not supported by the monitor .....blank screen. I plugged another 19" monitor into the other output on the card and both work fine but as soon as I remove the 19" the 52" reverts back to the unsupported mode. I have reset the pram and tried booting in safe mode but that did not help me. From bootup the 52" works fine until just before the login screen, then it switches resolution......blank screen. Would anyone know where these settings would be housed in OS 10.5.1 so I can modify (delete) them?
Information:
G5 Quad
Mac OS X (10.5.1)
is there any way to run power pc application without installing any other os ..
Info:MacBook Air, Mac OS X (10.7.1), late 2010
im looking for an application that will allow to charge the macbook automatically when the battery is down. so although the charger will be in the power input the laptop will not charge but only if its batter runs down.
this way there will be less power used since the laptop will charge only when it needs to
