MacBook Pro :: Keeps Going To Sleep By Itself - OS X Yosemite 10.10.1
Dec 2, 2014
My macbook pro keeps going to sleep and sometimes it won't wake up.. or the screen flicker between sleep and awake. I've done all the hardware tests and it says everything is in working condition. Sometimes it works perfectly all day and sometimes it doesn't.. I've reset the PRAM and NVRAM and that doesn't seem to fix the issue.. (I have a video I filmed with my iphone of the problem but I can't add it). My MacBook Pro is barely a year old.
Info:
MacBook Pro (13-inch Mid 2012), 2.9 GHz Intel Core i7 8 GB 1600 MHz DDR3, OS X Yosemite (10.10.1)
Since I've upgraded from MacOSX 10.9 to Yosemite, my MacBook Pro wakes from sleep within 30 seconds. I've tried solutions suggested on Google, but they have had no effect (and usually are about MacBook's waking up after 2 hours).
I'm running OSX Yosemite (10.10.1) on s MacBook Pro (Retina, 13-inch, Late 2013) 2.4 Ghz Intel Core i5 8 GB 1600 Mhz DDR3 Intel Iris 1536 MB 256 Gb SSD with 125Gb free
To figure our what is going on I've started OSX in safe mode and logged in using the guest account. Also I've turned off WIFI and Bluetooth. The problem still occurs. The syslog shows relatively little from the moment that I select 'Sleep' and the computer wakes again (see below).
Until recently I have been able to login one time with a password to get to my desktop. Now I have to login twice. I am running Yosemite, whatever the newest version is. I have checked every setting I can think of to no avail.
Before and since i had upgraded to Yosemite my macbook pro mid 2012 15" has not gone to sleep when i shut my lid i have tried to reset to default in the power settings but that didn't do anything any thing els i could do?.
My MacBook Pro 13" (Mid 2010) doesn't go to sleep, when I close the lid or when I try to activate sleep under the Apple menu. I haven't changed nothing in the system preferences. I already tried the following: unplugged all USB devices plugged and unplugged external display closed all applications (except of Finder of course) resetted all energy saving preferences deactivated bluetooth checked share options (everything is deactivated)
Then I unplugged it from the power supply and after I closed the lid, it went to sleep. Then plugged in power supply again and sleep didn't work.
I installed Yosemite 10.10.1 on my iMac and my monitor keeps going to sleep while I am using it. I need to push the power button to turn it back on. And sometimes I have to hold the power button down to restart it and reboot the machine.
Info: iMac, OS X Yosemite (10.10.1), 27-inch, Mid 2011
Often when I put my iMac to sleep in the evening I find the system unresponsive when I come to use it the next day. I can see instantly that the system has an issue because I see that the screen backlight is on. The system does not react to any mouse or keyboard input and requires a power off reset to restart.
I thought that the issue may involve Parallels which is often running when I have this issue , however, I have spoken with Parallels support who recommended removing parallels, repairing the disk permissions and reinstalling Parallels which appears to have had no effect.
The iMac is very new and was purchased in November 2014 and is configured with a 3.5GHz i7 processor, 16GB or RAM 3TB HD and NVIDEA 980 graphics card.
Info: iMac (27-inch, Late 2013), OS X Yosemite (10.10.1)
I'm on Yosemite; on both my iMac and MB Pro, I can't put the computers to sleep when it's connected to the wi-fi; I have to turn the wi-fi off, and then it'll go to sleep. I'd like to be able to keep the internet connected when want to do this.
After a recent upgrade to Yosemite my dual monitors randomly don't awake after sleep. This all worked fine in Mavericks.
(I have a similar problem with my Thunderbolt disk drives which again worked fine in Mavericks, but now I always get "Disk did not eject properly" on awakening from sleep. I'll post this as a separate issue.)
The manual solution to both problems is to unplug the Thunderbolt cable - but doing that more than 10 times a day is not on.
Since installing Yosemite, when my Mac Pro comes out of sleep, I get a "Disk not ejected properly" for each disk drive attached by Thunderbolt 2. This all worked fine on Mavericks.
(I have a similar problem with my dual displays, which again worked fine on Mavericks - I've posted this on a different thread under Mac Pro).
Mac Pro 2014, OSX Yosemite 10.10.1, dual DELL U2713HM monitors, La Cie 2Bug Thunderbolt 2
After a few hours of uptime, certain keys on my keyboard stop working and I have to reboot: both command keys and the zero key. Sometimes, after the computer has been in sleep a long time, the keyboard and mouse don't respond at all. I can get the computer to wake up again by pressing the power key, but the mouse and keyboard don't respond, so I can't do anything except hard boot. This problem first appeared after the update to 10.10.1. (I'm dealing with it right now, so I'm getting the '0' through the keyboard viewer, but there's no way to access that from the password screen.)
Info: MacBook Pro (15-inch Early 2008), OS X Yosemite (10.10.1)
I recently installed Yosemite in my mid 2010 MacPro, when the computer goes to sleep I cannot wake it up with the space bar or mouse like I used to, I need to shutdown by holding the power button and then press the button again to power up.
My Browsers are not able to access the Internet after returning from sleep. This effects other browsers (Firefox & Chrome) as well. The connectivity from mail and iMessage is working fine. I am also hardwired and not using WiFi.
iMac 27 locking up after sleep mode requiring full power shut down and rebooting in safe mode then shutting down and rebooting normally.. Permissions and this check show no errors, the only error sleep mode failure. Boot up is very slow as well as wake up when possible is slow. Yosemite seems to need a new release in order to correct the boot problems. System operates more like a Windows machine than Apple machine what's going on?
I leave my Air on pretty much all the time, and put it to sleep while moving around etc. Sleeping it disconnect the Airport connection - which if very annoying. At a desk I've just been dimming the display all the way off in order to keep my connection.
However, I recently noticed that by setting a "sleep display" hot corner, my network connection is maintained.
I have 2 questions: 1) Is sleep display equivalent (functionally) to simply dimming the display all the way down? 2) Is there a way to either set up a shortcut to sleep the display (other than a hot corner) and/or set it so that only the DISPLAY sleeps after 'x' minutes?
I set the MBP to sleep in 10 min through the Energy Saver pref with the option to sleep the hdds. When it's about to sleep the screen dims, then turns black, then the sleep light comes on but does not blink no matter how long I leave it. The blinking only happens when I close the lid or when I select the Sleep option under the Apple logo. Is that normal behavior?
I have a macbook pro 13" early 2011 and I'm se as shown in the pictures (since i upgraded to os x yosemite) . It happens after display sleep or computer sleep on login not on boot up .I've noticed that i run out of ram when the problem appears (only 15MB RAM available out of 4GB), though i doesn't happen every time . I've talked to service and told me its either motherboard replacement or because the ram isn't enough (gpu shares with main ram) so maybe i should try upgrading ram. URL....
I have torrents going all the time. If the computer goes to sleep, the internet disconnects, so they stop. Display sleep wouldn't disconnect though. Is it OK to have computer sleep on "never" but keep display on "15 minutes"? I don't usually even leave the computer on overnight.
i tried mroogle and search but i couldn't find exactly what i was looking for and i know this community knows it all.
i am trying to prevent my new 2010 macbook pro from going to sleep when the lid in closed. i know there are programs that do this but they keep the display on as well. I wanted to know if there is a program that does it and has the option of turning off display. i am running snow leopard 10.6
Recently I've started connecting my 2.5GHz Intel Core 2 Duo (pre-unibody) Macbook Pro 17" to an external monitor (via DVI).
Since then my computer goes into Safe Sleep instead of Sleep (it's plugged into power).
This is an annoyance I'd rather avoid because even if all programs relaunch:I have to wait for them to launch (longer)Programs like Excel seem to have been quit in an unorthodox fashion: when it starts back up I get an error notice that it was shutdown inappropriately & the doc which reopens is a rescued version of the doc I had open before the safe sleep.
In tiger you could easily disable safe sleep and remove the sleep image file but in Leopard this seems to have changed. Yes you can disable safe sleep & remove sleep image files but only temporarily. As soon as you restart or change energy settings back to default, leopard automatically reverts the safe sleep settings to default and starts creating an image file again
Is there no way to permanently disable/remove these?
I am running Mac Mini as a home server (turns out to be not a great idea, btw), and even though I set the preference to never sleep or shut down, it does go to sleep when there is no activity for long time. Since I am using it as home server, it should stay awake all the time or at least wake up from sleep when there is incoming ping from other computer, but it just goes to sleep.
Sleep seems to have stopped working all of a sudden on my recently upgraded iMac. The only thing I remember doing was repairing disk permissions and changing a few iChat preferences.
iMac (24 inch Early 2009, 2.93 GHz Core 2 Duo, Lion 10.7.3) randomly goes sleep. No hot corners, never sleep setting. It seems it goes to sleep more often when CPU is busy and graphic intensive jobs running (videos, gaming). I cleaned up air ways by vaccume, but it did not help.
Temp monitor showed
CPU 55C power supply 95C northbridge 89C graphic processer goes up to 86C
when it went to sleep for no apparent reason./private/var/log/kernel.log says "Previous Sleep Cause: -100"
Info: iMac (24-inch Early 2009), Mac OS X (10.7.3)
I have a late 2008 15" MBP, and I often leave it playing videos while I go to sleep. Lately, it's stopped sleeping the display and/or going to sleep (depending on whether something's downloading in the background) after the video is finished, which is quite annoying as the screensaver's glare normally wakes me up in the middle of the night (and it's probably not too good for the display either).
Before a few weeks ago, it would quite happily sleep the display a few minutes after the video (in Front Row or otherwise) finished playing, but it's now consistently ignoring the sleep and display sleep settings (which are all correct). I even set the display sleep timer to 1 minute, waited without anything happening in the background, but nothing happens.
Anyone have any idea how to get the timers to work again?
