After playing with the display settings to adjust a second screen I've noticed that my display during startup and at the 'log in' page are not in the optimal size and resolution.Â
how to restore factory defult display settings.Â
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.4)
While fooling around with my MB I some how screwed up the display settings! Can someone tell me the factory settings? I tried 600 x 800 on up and its either too small or too "stretched".
View 5 Replies View RelatedPlayed around with the display settings and can now not get them back to the way they were!
Anyone who can enlighten me on how to reset the default display settings?
I'm a new mac user. Just bought a Mac mini with Mac OS X Lion (10.7.4). I was messing around with the resolutions on the display settings. I set the resolution back to the 1080p where it was when I first started messing with it. Now the color is off, the screen is not how it was before I started tampering with resolution settings. I've tried recalibrating the color but its still off. When I start my mac up in Safe Boot the windows and color look normal as if I changed nothing.
Info:
Mac mini, Mac OS X (10.7.4)
I was using my MBP when I noticed that the display (the built in one) looked a little washed out. To make sure my color profile was set to the correct one, I opened up the display panel in System Preferences. The moment I opened it, the display snapped back to its regular appearance. As far as I can tell, it goes into the washed out version after going to screensaver and coming back, and going into display prefs is the only way to restore it. Anyone seen this before or know how to keep it from doing this?
View 2 Replies View RelatedHow to reset macbook to default settings?
View 4 Replies View RelatedWhen I try to reset my Macbook Pro 13" to factory default setting, using the original Mac OS X install DVD, system did not allow me and prompted "You can't use this version of the application install Mac OS X with this version of Mac OS X.". What does it mean? What should I do to rest my Macbook Pro?
Info:
MacBook Pro, Mac OS X (10.7.3), Using the original Mac OS X Install
A little while later I notice the MBP felt like it was running when I touched it. It was vibrating from the HD running. I didn't think much of this.
I just now tried to turn my MBP on and it wouldn't. I decide to plug it in. When it turned on it did so for about 2 seconds, turned off, then turned back on. It then took a long time to boot up. When it finally did boot, it told me that the clock was all out of whack and I noticed tons of my settings had been reverted to default. I then check the battery to see that it is charging but the level is at 1%! When I shut the MBP lid earlier to put it to sleep the battery was at least 50%.
Whenever my Macbook powers down to 0 battery life and reboots from a new charge, I loose all my software settings, including browser cache, adobe settings etc. It's really annoying. I have a brand new MacBook Pro 15" 2.2Ghz i7.I'm running OSX 10.6.8 on it (I reverted because I didn't like Lion).
Info:
MacBook Pro, Mac OS X (10.6.8)
my mac has a virus or settings have been changed, but every time i click on either a link or open a new page i get extra pages open with random spam stuff and the mac keeper pages keeps opening. my settings for the default search engine keep changing too.
Info:
MacBook Pro
I am calibrating my system with spyder2 and it wants me to set my brightness back to the default. What is the default setting for the brightness?
View 1 Replies View RelatedI want to set my dock to default settings Basically, I want my dock to look exactly like it did when I first turned on my mac for the very first time. I want all the items I added to the dock gone, and all the default ones I removed back in the dock. I know I can do it manually, but I want to know if there's a way to do it via terminal or something like that.
View 8 Replies View RelatedAnyway I can control the fans for my Powerbook G4 so it starts to pump air out at an earlier time than 63C? I tried G4 fan control but it never saved the settings (was at default after restart) and not sure if it even worked.
View 2 Replies View RelatedI'm trying to set it so that all finder folders have to view property 'Snap to grid' enabled... I've done it before, but can't remember how to on my new MBP.
View 3 Replies View RelatedToday the IT department at my university set up my Early 2008 MBP to work with the library WiFi. While doing this they completely messed up my airport settings so now I cannot connect to my home network. Is there anyway I can reset the network settings to default like they way they were before? I am running Snow Leopard.
View 4 Replies View RelatedI was messing around with the settings on my Macbook Pro, and I think I may have accidentally changed the background of the folders. I really liked it, does anyone know what the default is supposed to be?
View 2 Replies View RelatedWhat are the steps needed to set the OS X Network Settings to the way they were when the computer was new? I want all the locations and settings I currently have removed and I want it the way it was. I am using OS X 10.5.6 Leopard.
View 7 Replies View RelatedMy macbook pro has been connecting to my TV appropriately for months. The display is suddenly changing to a different default when I connect now. It was fine two weeks ago and has done 3 software updates in between. I have not loaded other new software. When the thunderbolt connection is made, both screens turn blue, then both display a screen resolution formatting that doesn't fit the screens.
Info:MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I'm using a MBA connected to a 52" TV with a 1920X1080 resolution when I teach. I often turn mirroring on and off depending on what I'm teaching and what program I'm using. When I turn mirroring on it defaults to a 1400X1050 resolution and I have to manually go into display settings and change it to the higher resolution. Is there a way to set the default settings so that it will always default to 1920X1080?
Info:
MacBook Air, Mac OS X (10.7.2)
i have 1.25ghz mdd default jumper settings is like first table now i have jumpers like third table. about this machine shows 1.58ghz now and its unstable so how i get this f..king 1417mhz
View 6 Replies View RelatedSafari seems to have changed and I don't know how to get back to default preferences. Suddenly, it is wiping (visual) open, rather than opening the way every other application does with the last site visited, even though preferences are set to open with homepage. The top apple bar with the apple on the left and my name on the right hides when safari is open
Info:
Mac Book Pro, Mac OS X (10.6)
I have an Epson Workforce 845 Printer. It is working well. However, I am running into one annoyance. The Epson printer will take envelopes in Cassette 1. I ahve envelopes loaded there and plain letter paper in Cassette 2. When I print an envelope it is no problem. I simply in the Print dialog select the Envelope preset and it works well. However, I don't wish to select a plain paper preset *each time* I print an ordinary document. However, the Default print settings defaults to Casette1 and I see no way to force it to default to cassette 2 except when I don't select an override.
Info:
iMac, Mac OS X (10.7), 27-inch Mid 2011 2.7 Ghz Intel Core
A friend did something that changed the display on my Macbook Pro. The background is weird and distorted and seems to be out of focus. I want to restore factory settings but without the trouble of reinstalling all of the programs. Can it be done and if so, how? I will watch for a reply.
View 1 Replies View RelatedI'm pretty new to Mac and I'm currently quite confused about how to set default settings for all my files and folders in Snow Leopard. Specifically, I would like for all the icons in Finder windows (and preferably also in the "Documents" stack in the Dock) to automatically be displayed as large icons and also for all my files and folders to be arranged by Kind - all of this in "List View". In "Icon View", all of these things do work (except for in the "Documents" stack in the Dock).
In "List View", when I select "Use as Defaults" in the "View Options" panel (View>Show View Options), it does not seem to apply my settings automatically to all my folders and files. Likewise, when I right-click in a Finder window and select "Arrange by > Kind", it only seems to arrange by Kind in that particular folder.
I have read several other threads, but none of the solutions seem to work for me. One thread suggested that I hold "alt" after I have right-clicked so that the option "KEEP arranged by" shows up, but this does not seem to happen in "List View".
Over the years my finder windows have been set to different colors, font sizes and so on. When I make a change I select the make default box in the show view options, but they never default except for that one finder window. I have erased com.apple.finder.plist and just for fun the com.apple.sidebarlists.plist but can not get the finder to go to a true default. Is there another plist that I am missing?
Info:
Mac Pro, Mac OS X (10.6.8), I am not a blonde
Is there a way to set the default print settings to grayscale like you can on a Windows computer?I have an HP Photosmart B210E, but the only way to print grayscale all the time is to be sure to set it on File/Print's dialog or replace my printer with a Grayscale only one.
Info:
Mac mini, Mac OS X (10.7.2), Second Gen
I was trying to modify my monitor settings and hit the detect monitors button by mistake thinking it may help a sizing issue. Now after start up white screen with apple in the middle the monitor goes blank. Is there a way to restart while holding down keys to reverse this since I can't see anything on display?
Info:
Mac mini, Mac OS X (10.7.3)
I played around too much with the view options/columns and now I just want it back to how it was when it first came with the macbook.
Info:
itunes, Mac OS X (10.6.8)
I'm not sure how this has happened, but my Mission Control has become mirrored from the default settings. The "X" that appears to close programs now shows up on the left hand side of each Desktop, and the pop-out desktop that I am supposed to click on to create a new desktop is now showing up on the left hand side of my screen instead of the right hand side of my screen. Is there a way to restore Mission Control to it's default settings and configuration?
Info:MacBook Air, Mac OS X (10.7.4)
A couple days ago after restarting my imac I was shocked to find that my personal preferences had been reset to default and that some programs were behaving like they had just been installed. Firefox for instance asked me to import settings from safari, after skipping importing i found that all my bookmarks and add-ons were gone.
Info:
iMac, Mac OS X (10.7.4), Intel Core i3
