MacBook Pro :: Enabling Inertial Scroll?
Apr 26, 2010Does anyone know if there is a <free> way to enable inertial scrolling on the older, Core 2 Duo Macbook Pros?
View 1 RepliesDoes anyone know if there is a <free> way to enable inertial scrolling on the older, Core 2 Duo Macbook Pros?
View 1 RepliesSo, been playing with it and I don't know if it translates as well to the laptop world. I love when i use it on the iPhone but it feels a bit 'funky' using it on the trackpad. Maybe it's me, but it just doesn't feel quite right. I am going to give it some more time but I personally may be turning this feature off.
View 6 Replies View RelatedI just bought a new 13" MPB from the Apple Store today, however after using it I noticed there's no inertial scrolling. I'm using the old hard drive from my 2008 unibody macbook so would that have something to do with it? I can't find the option in the preference pane either.
View 24 Replies View RelatedFor some reason, the scroll ball on my mouse fails to scroll down but will scroll up. I've obviously accidently changed something.
View 4 Replies View RelatedI have a unibody macbook pro 15" with leopard 10.5.8, installed the magic mouse software update. The mouse does scroll, however it doesnt have that smooth inertial scrolling when you flick like the mouse does with the iMac.
View 3 Replies View Relatedi was wondering if this new 'inertial' trackpad gesture available on the new line of MBPros might be possible to score on a MBAir rev B/C..this is a feature which would be great to have, IMO..anyone know if this new 'inertial' gesture is software or hardware-based?
View 6 Replies View RelatedIs there a way to clean up the mighty mouse? My scroll wheel no longer works right.
View 1 Replies View RelatedI have a mighty mouse. It only scrolls up, left and right on a page but not down. It's really frustrating...I use it every day...
View 2 Replies View RelatedI have a mighty mouse. It only scrolls up, left and right on a page but not down.
View 10 Replies View RelatedStopped working a couple of days ago. It will scroll up and I can click in the side bar and move up or down but not when I use the little ball on top of the mouse.
Info:
intel iMac, Mac OS X (10.6.8)
How to turn on tap to click without using a mouse? My trackpad clicker no longer works. I'm not very good at macs so please keep this in mind.
View 6 Replies View RelatedSo I just installed an Intel x25-M into the hard drive bay of my MBP 15" i7, and put the stock HDD into the optibay.Installed OSX onto the SSD, wiped the HDD clean, everything seems to be working perfectly.Disabled SMS, disabled hibernation, all fine. I would like to enable noatime, but for the life of me can't figure out what I'm doing wrong.
After I restart, I check the status of naotime in terminal (as directed) but all I see is "hfs, local, journaled" and there is no indication of noatime.
I own a MBP 13" early 2011 model  I just recently Upgraded my 320GB hard drive to an intel 520 SSD (240gb). After setting up lion 10.7.3 i realized that TRIM was not enabled by default. after searching around I found a way to enable it. However, I've also read that alot of sandforce 2281 controllers have their own form of garbage collection. intel uses some custom firmware they written so would it be benificial if i enable trim or not?
Info:
MacBook Pro, Mac OS X (10.7)
i just noticed today that my photo stream has not been working for over a month. I have all the current updates, but when i try to turn on my photostream in iphoto is says " iphoto was unable to connect to photo stream." In my system preferences, I have photo stream checked but when the errer comes up, it automaticlly unchecks it.
Info:
Mac OS X (10.7.4)
How do I enable java script. unable to open movies
Info:
MacBook Pro (13-inch, Mid 2012)
System: Silver Macbook
OS X Ver.: Leopard
Backlit Keyboard?: No
Essentially my problem is that I'm unable to set new shortcuts for the F5 and F6 keys for my Silver Macbook. Since it doesn't have a backlit keyboard, there's no function for F5 and F6. I'd like to make them go to shortcuts such as "Show Desktop" and "Spaces", both of which are supported under the "Keyboard Shortcuts" Tab of "Keyboard & Mouse". So, I have them configured to match up to F5 and F6, but they do not activate the corresponding function when pressed.
I have the "Use function keys as standard function keys" checkmark unset:I apologize for the fairly small problem...I just really want to free up those two keys! I appreciate any response.
I'm using a wireless Mighty Mouse with a Mac Mini (the newest model) and am running 10.6.3.
The scroll wheel can scroll up just fine, but scrolling down, it literally only scrolls down a fraction of a pixel (if that's even possible) per finger flickr/scroll.
I opened the Mouse panel from System Preferences and adjusted the Scroll setting, but no luck.
I have an Unibody MacBook. I've experienced that under OS X "Tap to Click" function of the trackpad stops to work after "some" usage. Then I go to System Preferences, disable the feature, reenable it and it starts working again. OS X is updated and firmware updates are all installed.
Before I formatted and reinstalled Lion on my MBP, I could select a window by tapping on its top bar and drag it using single finger on my trackpad. After reinstalling it, I am unable to do so. I have investigated the trackpad features in System Preferences, but it shows only the three-finger drag option. How do I get to select + drag a windown using single tap.
Info:
MacBook, Mac OS X (10.6.7), MB intel Core2Duo,320GB HDD,4GB RAM
Suddenly I can't scroll down using my aqua scroll bar. I can scroll up just fine. This is true whether I'm in Firefox, Safari, or any sort of document-making applications. System preferences is set to 'scroll horizontally and vertically.' It's not the end of the world, but it's klunky and annoying. Could someone please remind me of something very obvious that I'm obviously doing wrong?
View 2 Replies View RelatedSince AirPrint is only working for select printers right now, it doesn't work for many people. I have heard of ways to workaround this.
First I have heard of adding certain files into the Mac's file system, I hear this is tricky and doesn't work for everyone. Another way I have heard is through applications such as Printopia. I know there are other applications that are free but I have heard some bad things, also I don't want to pay $10 for Printopia.
I am in Terminal, trying to enable PHP. I have found
#LoadModule php5_module libexec/apache2/libphp5.so
but I cannot delete the # sign. When I highlight the # and press delete, nothing happens, but I can delete other letters in this window. Is there another way to enable?
PHP version 5.3.3 seems installed. But when I attempt to open php pages the browser opens them as text. It seems that I must edit the httpd.conf file to actually enable php. I changed the permissions on the file with sudo chmod ug+rw for httpd.conf. TextEdit still doesn't allow me to change it. It's saying that I don't have permission to write to that folder. I changed the permission the /etc/apache2 and that didn't help. What must I do to be able to modify httpd.conf and enable php support? Is there a different way to enable PHP? I am aware that MAMP is an option. But I should not have to use that option if php is available in apache.
Info:
Mac OS X (10.6.6)
Well I don't have the Tiger CD anymore but I heard I can boot into single user mode and enable root? I tried this but didn't work
/sbin/fsck -y
/sbin/mount -uw /
/sbin/SystemStarter
passwd root
Is it different for tiger?
how to enable both SSH and RDP on Snow Leopard.
We are doing some testing on a Snow Leopard desktop and would like to do some o this work remotely.
I have been trying to figure how to correctly enable SSH and RDP so we can use either of them to remotely manage the box.
First, is this possible on just Snow Leopard and not Snow Leopard Server?
I am struggling to see if this is possible to do. Maybe it is not?
One of the things I liked about 10.4 is that you could type ahead before the login window was fully started and it would keep what you typed. In 10.5, OSX discards everything you typed before it fully started. Is there any way to enable the 10.4 behavior?
View 2 Replies View RelatedI'm just wondering if I enable time machine on a certain external HDD, will that HDD become entirely closed off for any other writes manually? In other words, Will I still be able to put video files on the HDD if I enabled it for time machine? Because technically my external HDD is 700GB and my internal HDD is 250GB. I would rather not partition.
View 6 Replies View RelatedHow do i enable ACLs on 19.5.3 Leopard system?
View 1 Replies View RelatedHow come when I enable the "Secure Empty Trash" feature and put something into the trash and then empty the trash it says it's emptying 4 things even though I only put one single item into the trash bin?
View 7 Replies View RelatedDoes anyone know how to successfully enable the taskbar preview in Windows 7? I'm running it within Parallels and every time I run the Windows Experience Index my base score is never higher than 1.0. I hear 3.0 is needed to turn on the taskbar preview. Anyone know of a work around?
View 1 Replies View Related