I used the manual bar "sleep" to idle my macbook pro. Couple of minutes later I try to press enter button to activate it but fail! The worse thing is that even though I hold the power button for long, the macbook pro still didn't have any response.
Info:
MacBook Pro, Mac OS X (10.7.3)
I have a 15" MacBook Pro unibody, when I click shut down, to turn it off, it just restarts! It doesn't shut down. The only way to turn it off is to hold down the power button for a few seconds. Even then, sometimes when I do that, it will randomly power up without touching it at all.
I just got a 13" MacBook Air and I'm having an issue with it; googling around I've seen slightly similar problems, but nothing identical to what is going on with mine. I have the trackpad set to use the "tap to click" option in System Preferences and I've noticed that after I sleep the machine and wake it again, something gets bungled with it. The tap to click either stops responding entirely, requiring that I use the regular physical click instead, or it's highly, highly unresponsive. I've seen other reports of erratic clicking and the mouse moving on its own after sleeping the laptop.
Which thankfully mine isn't doing, but I haven't seen anybody reporting this slightly more demure issue. In any event, rebooting the machine fixes the problem completely until I sleep it next. I'm not 100% convinced that this is an Air issue, however, since I think it affected my 15" MacBook Pro to a lesser degree right after I upgraded that machine to 10.6.5, but I can't be entire certain of that since I no longer have that laptop and rarely used it without an external mouse in the first place.
I was using my Macbook Pro, finished, put it to sleep and left for a few hours. When I came back it was off. I try to turn it on and the power light comes on and I can hear the disk for about 3 second and then it just shuts off again. I searched the apple support site for this problem and I've done these things. [URL]. I play computer games on it and often the battery would drain. I would plug it in when the 10 minute warning came up, and the little light on the MagSafe plug would turn from green to amber. Lately it had been turning back to green even though the battery icon on the screen said the battery wasn't charged, sometimes the computer would even shut down even though it was plugged in (again, it was plugged in and the light was green, even though the battery icon said it wasn't charged). Maybe it's related to my computer not turning on?
View 1 Replies View RelatedMy computer: Late 2008 MBP 15" OSX 10.9.5
Whenever I shutdown or sleep the computer, the sound does not work when I start it up or wake it up. The startup sound does not play, and the audio controls are not greyed out. Audio does not work through headphones either. Plugging in and unplugging headphones does not solve the problem.
Sometimes a PRAM reset will solve the problem, and an SMC reset always brings the audio back, but only until I shut it down or put it to sleep again.
Info:
MacBook Pro, OS X Mavericks (10.9.5)
During start up I get the apple logo and everything boots although it takes forever, the apple logo goes away screen goes blue, and sometimes it loads to the login screen about 10 mins later, and sometimes it just sits there. - During restart, it shuts down makes all the appropriate sounds, screen goes dark, and all you hear is a residual humming from the inside under the keyboard, and then never restarts. (You have to force shutdown) - Same story as above with both shutdown, and sleep.
The only way to get it to load successfully is in safe mode, but even then it still wont do the above problem correctly, it just at least starts.
- Resetting the PRAM, Holding power button for 5 seconds until repeating flashes, I've tried reinstalling snow leopard 5 times, I've checked for updates, I've repaired disk permissions, I've repaired the disk, I've even tried stepping the OSX back down to 10.3(The original operating software for this MB)
so i've been having an issue with the double tap to hi-light any text i wish to copy. Such things as double tapping the URL bar to hi-light the whole url so i can just retype w/e site i want to go to. Every time i restart or turn off or my mbp goes to sleep and i reopen it, the double tap function resets. So i'm forced to go to the system preferences > trackpad> "double-click speed" to slowest in order to get my double tap to hi-light anything again. Is there something wrong with my mbp? Or is there a way i can save the settings when i put the double-click speed to slow so that it wont reset every time my mbp needs to be woken up or restarted?
View 2 Replies View RelatedMy macbook onward restart when waking up from sleep, but no error message appear . Plus all my program and website reload back as before. Only problem is why it restart occasionally and it is normal. I don't have that symptom on earlier. Now using maverick 10.9.2
View 1 Replies View RelatedSHORT VERSION:
How can I have a one-click button in OS X to 'restart into bootcamp windows XP' ?
LONG VERSION:
I have bootcamp running windows XP on my mac pro.
Apple have made a simple button in Windows to 'restart in Mac OS X'. This is great and really fast to do. But for some reason, they forgot to do this in in OS X.
When I'm in OS X, if I want to restart into windows the , I have to do either of the following:
a.) Click the apple icon, click 'restart', click confirm 'restart', wait for the mac to shut down, wait around holding down the option key to bring up a startup disk menu, then when it appears, click the arrow below Windows.
b.) Click on 'system preferences' in the dock, then click on 'start up disk', then click on 'windows', then click on 'restart...', then confirm 'restart'.
I want a simple one-click 'restart in windows' button that I can click in OS X, just like the one-click 'restart in mac os x' button in windows.
No, I'm not interested in using VMware. I have it and use it in conjunction with everything else. Just a simple 'restart in Windows' button will do the trick.
No I'm not interested in any 'just use mac os x' responses. I'm forced to use both native windows and mac for work. A simple 'restart in windows' button will do the trick nicely.
Yes, I have tried using the automator to record an action, but apparently it insists on showing the mouse playing it all back... and all you can do is speed it up x 10, you can't turn the 'show mouse movements' option off, nor can you just make the automator workflow into a one-click button, since I can find no way to select 'automator runner' as the default application to run the workflow, and placing the workflow in the dock just opens it in the automator, so then you have to click 'play'. Just quite messy and unprofessional in front of clients. So, again, a simple one-click button in the dock will do the trick.
Hopely I have caught out most who will try to put this thread off course.
I'm amazed apple didn't think of this simple thing before- I suppose I shouldn't get surprised any more.
For some odd reason, when I try to put my Mac to sleep, it decides to dim the screen and show me that "You need to restart your computer" message in 8 languages. I usually keep my Mac on sleep when I am gone.
View 4 Replies View RelatedThere's something like that in windows where you can actually have the shutdown/logoff/sleep buttons on the desktop as shortcuts...
Is there a way to create a desktop icon to make my mac sleep?
I know the keyboard shortcut but I'd prefer to click... and yeah going to the top-left corner and click on the apple button and go down to sleep is not quick
When I click on my Imac to sleep, it shuts down instead...
View 1 Replies View RelatedMy iMac becomes totally unresponsive after sleeping for any length of time. It will not wake from sleep, even if I connect a wired keyboard; and it will not shut down or restart until I reset the SMC by unplugging the comptuer from power for 15-30 seconds. I can restart the computer after resetting the SMC, but the same thing happens every time the computer goes to sleep.
I have also set the computer sleep slider to "never" and reset the PRAM. Although people have been complaining about this issue for months, Apple's Lion updates have not addressed this issue.
Info:
iMac, Mac OS X (10.7.4), 3.06MHz Core i3
I cant seem to figure out how to get Quicksilver to Restart, Shutdown, and sleep computers. It is enabled on one computer, but not the other. Is it a plugin? or a radio button I have to check off?
View 1 Replies View RelatedSometime when I stop using my MBP for a minute or so, the screen goes black and won't wake up. I can see that the lights are on the keyboard and it's running but won't wake up. I will have to hold the power button down and then restart. Does any one know how to fix this? It's starting to do it more and more ofter.
View 1 Replies View RelatedIs there a way to manually lock an iMac screen? Like you can on Windows' PC's, I'm wanting to type or click a function to lock my screen and go to the log-in screen instead of waiting for the alloted time to run out.
Info:
iMac, Mac OS X (10.7.4)
Is there any such thing as a tool or utility that allow a logged in networked admin user to restart/sleep or shut down a server from another terminal or workstation? It'll be kinda useful at times.. I ain't so much bothered about starting a remote system.
View 8 Replies View RelatedI restarted my computer, and when it booted back up the clock was reset to Dec 31 2000. I did not change the clock, and my control settings are password locked.
Should I be concerned about this, and has this happened to anybody else?
I'm trying to update my Macbook Pro to the new 10.7.4 I have downloaded the update twice (no interruptions during download) and when i click to restart the computer to install the update, the update dosent install. I keep getting an error message saying the download is corrupted, when the update tries to unpack to install.
Info:
MacBook
Pro, Mac OS X (10.7.3)
My workflow entails repetitive tasks that would be so much easier if I could set Leopard's (Safari's) default double-click functionality to select ALL text within the Google search box instead of having to use a triple-click. Does anyone know how to make this change to Leopard/Safari?
View 3 Replies View RelatedI had to dissassemble my wireless Mighty Mouse to clean it properly, as the trackball was unable to scroll up and down. As I had cleaned the trackball, I attached the two internal cables to their respective "slots" again and assembled the mouse.
Now my right button does the same as the left button (right click = left click). I tried dissassembling the mouse again, but I cannot see what I could have done wrong. After all, there are only two cables to attach and de-attach inside it.
I just bought a mighty mouse, happy as I was, plugged it in and started my ibook running OS X 10.3.9.I know the mighty mouse shouldn't have full functionality (as the software delivered with it is >10.4.2).The problem is that the right click doesn't work right. When I try to right click it sometimes takes the right click, sometimes takes it as a left click (which is extremely annoying in firefox or finder).
I have SteerMouse (I'm a windows/linux user too) installed but when I de�nstalled it the problem remained.
When I plugged the mighty mouse in my pc (at that time running windows) right click just worked.When using a cheap mouse (from pleomax) the right click on the ibook (with Steermouse installed) works all the time.
I find this al really confusing. Seems like it can't be the hardware because it works on windows, but it can't be the software because another mouse does work.
I noticed that when right clicking at the total right side near the "expose-button" (not a position my fingers lay naturally) right click works all the time. I don't hope this is normal?
I'll try and click on a link and nothing, then I click bookmrks in the menu bar, it works, then i can go back and be to click on the link and it'll work.
View 2 Replies View RelatedIs the right click noise supposed to sound different to the left click? Mine does, is that normal?
View 7 Replies View Relatedwhen occurs a suspension of hard drive activity, manually or after a period of inactivity, this suspension seems to be incomplete (a ventilator continue to run) therefore my mac (power-mac G5, OS 10.4.11) is unable to restart, no possible action from the keyboard (I must shut down and restart)
Info:
PowerMac G5, Mac OS X (10.4.4), & PowerBook (10.3.9)
Whenever I open my mac mini it comes up with the same message "You need to restart your computer hold down the power button or press restart" in four different languages.
View 2 Replies View RelatedI leave my Air on pretty much all the time, and put it to sleep while moving around etc. Sleeping it disconnect the Airport connection - which if very annoying. At a desk I've just been dimming the display all the way off in order to keep my connection.
However, I recently noticed that by setting a "sleep display" hot corner, my network connection is maintained.
I have 2 questions:
1) Is sleep display equivalent (functionally) to simply dimming the display all the way down?
2) Is there a way to either set up a shortcut to sleep the display (other than a hot corner) and/or set it so that only the DISPLAY sleeps after 'x' minutes?
I set the MBP to sleep in 10 min through the Energy Saver pref with the option to sleep the hdds. When it's about to sleep the screen dims, then turns black, then the sleep light comes on but does not blink no matter how long I leave it. The blinking only happens when I close the lid or when I select the Sleep option under the Apple logo. Is that normal behavior?
View 11 Replies View Related I have a macbook pro 13" early 2011 and I'm se as shown in the pictures (since i upgraded to os x yosemite) . It happens after display sleep or computer sleep on login not on boot up .I've noticed that i run out of ram when the problem appears (only 15MB RAM available out of 4GB), though i doesn't happen every time . I've talked to service and told me its either motherboard replacement or because the ram isn't enough (gpu shares with main ram) so maybe i should try upgrading ram. URL....
Info:
MacBook Pro, Mac OS X (10.6.8)
I was using garage band when the screen popped up saying that i need to restart my computer. i tried holding down the power button but the screen is frozen. the computer is making a quiet clicking sound. if i close the laptop the light stays on and the sound persists.
View 2 Replies View Related