I can't install a printer. When installing a printer I get this message:
Canon CAPT printer driver utilities for Macintosh
The most recently added printer will be deleted because the maximum number of printers that can be added has been exceeded. Delete an existing printer and than add this printer again.
I've deleted all existing printers but still get this message
My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
View 3 Replies View RelatedIts the 2010 2.4 model Is there a trick to open it ?i dont want to strip it out but its not turning
View 7 Replies View RelatedI am not very experienced in this so forgive me. I have a 13 in MBP mid 2010. I am selling it because I purchased a MBA. I reinstalled(reformat) the OS from Disk 1. Now do I have to use the applications disk to install all the applications or are they already there from the reinstall?
View 2 Replies View RelatedI've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
Hi, my brand new iMac 21.5" (just 2 weeks old) does not have the appropriate driver for my printer. My printer is a Samsung CLX-3160fn. The iMac has lots of other Samsung drivers, including one that's close (for the 3170 series), but the close one does not work.
Went online to search for driver but was not able to find one for Mac. Does this mean my printer is just not compatible with my iMac?
I Recently installed on my MacBook Pro (13-inch, Mid 2010) windows7 and then updated to windows8. I'm now unable to install Bootcamp on the windows OS due to compatibility issues.
Is there a specific version of bootcamp that may work and if yes where can I find it?
Info:
MacBook Pro, OS X Mavericks (10.9.4), Windows 8.1
I got a new HP wireless printer, and the mac suggested setting it up with the USB first, and then disconnecting once it was configured. I did all that.The mac asked to choose a wireless network for the printer, I did. Then the set up CD asked me to add a printer to the qeue from system preferences from the menu- when I clicked my printer was already added. None the less I followed the direction, and then got the message "You already have a similar printer set up, would you like to add this too?" I clicked YES, and then continue.
When I clicked on continue, the set up cd (or mac) told me that I had NOT set up a printer from the Queue (sorry about spelling), even though I had. So when I clicked continue, it told me the printer was not recognized in the wireless network, and now I'm stuck with plugging it in the usb. Please I know this sounds confusing, but why is this happening and what do I do to get the mac to recognize my printer? Apparently its not.My wireless signal is fine, I checked.
I'm looking to the size of the Hard disk drive in my 2009 17-inch pro. But can't find if the case will take a 1T HDD or not. As the 1T drive are around 12mm and not 9.5mm of the smaller one right now.
Info:
MacBook Pro, Mac OS X (10.7.3)
There wasn't one installed when I bought my Macbook Pro so I had to buy one seperately and I'm just wondering how to install it?
View 5 Replies View RelatedI am trying to install a new printer. I have a Aficio MP C2800 from Ricoh. Went on their web page and downlaoded printer software but the printer did not show up as installed on MacBook. How do I install a new printer on MacBook Pro?
Info:
MacBook Air, Mac OS X (10.7.3), think i'm running OS X Lion
Battery
I had a 11 inch air 1.4GHz/4GB/128GB for two weeks. I usually set the brightness to 75% and for consistent web browsing (no heavy flash) I can get about 5h15min battery life. I noticed someone here claiming 8+ hours battery on 13 inch so I decided to give it a shot.
I got a new 13 air with 1.86GHz/4GB/128GB yesterday and start to run on battery immediately. I was disappointed. The brightness was also set to 75% and I start to count the time from 25% while browsing MacRumors.com. And it only took 1h38m for battery descending from 25% to 0%. Again, pure web browsing and no heavy flash.
So here is my conclusion: On 75% brightness, 11 inch air's battery performs beyond advertised 5 hours and 13 inch's battery performs fair and normally should give you around 6h30m~7h.
Noise
I don't have equipments for measuring the noise, but while copying the same 10GB files from external drive to the machine, the fan noise from 13 inch is much louder than 11 inch.
Now I like my 11 inch more in general, although I really hate the 1366 x 768 screen. I don't know if I should sell the 13 inch or 11inch...
[edit]:
On my 11 inch air: battery capacity 4664
On my 13 inch air: battery capacity 6634
[edit2]:
I will do another test to see how long exactly my 13 inch can last after a full charge
I have a HP Envy printer already installed to a laptop. I am having a problem printing form my MacBook pro. How do I get my MacBook to recognize printer.
Info:
MacBook Pro
I have D-Link 824VUP and printer Xerox 6115 connected to dlink by usb, and macbook also, The question is "How to install printer for using in wifi network with my macbook?"
View 1 Replies View RelatedI just purchased a Brother MFC-7860DW printer/copier/fax. I have a Macbook Air with OS X 10.6.8 and use a router....Wireless
The instructions tell me to download a driver (which one??) and insert the CD Rom......I do not have a CD Rom. Now what do I do?
Info:
MacBook Air
I installed the cannon driver for my cannon mp550. My sister didn't even have to to anything it just automatically found hers?
Info:
MacBook Air (11-inch, Early 2014), OS X Mavericks (10.9.3)
To those contemplating on picking up the 11-inch MacBook Air or the 13-inch MacBook Air, I thought it would be helpful to list the differences between the two.
Below is what I've compiled so far (in no particular order):
1) SD Card Slot is on the 13" MacBook Air, not present on the 11"
2) Higher clock speed configurations on the 13" (1.4 GHz/1.6 GHz vs. 1.86 GHz/2.13 GHz)
3) 6MB of shared L2 Cache on the 13" vs. the 3MB on the 11"
4) 1066 MHz frontside bus on the 13" vs. the 800 MHz on the 11"
5) Larger capacity battery and an extra 2 hours of battery life on the 13" (7 hour 50-watt-hour battery on the 13" vs. 5 hour 35-watt-hour battery on the 11")
6) Slightly larger trackpad and more room for your palms while typing (hey, it's true!)
7) 16:10 1440 x 900 13.3" Display vs. 16:9 1366 x 768 11.6" Display
8) The 13" model weighs in at 2.9 pounds while the 11" weighs in at 2.3 pounds. .5 pound weight difference
If you have anymore differences between the two models, post below and I will add them to the list!
I am trying to use my HD Sansui 32 inch LCD TV as a monitor for my Macbook. I can't work out how to set it up properly. My macbook is running OS X 10.5.8. My TV supports 1920 * 1080 HDMI 60Htz NTSC and various other resolutions. I am using a mini DVI to DVI adapter and then a HDMI lead to the tv. Problem one is that when I switch the Macbook on and close the lid nothing comes up on the TV screen (meaning it is supposed to only driving one screen, the TV). If I do this with the VGA connection it will. Momentarily the apple symbol will come up and the little circle below it but then my TV says signal not supported.
If I have the Macbook lid open when I switch the computer on both screens will work and I can select 1080P, however it is very grainy and not pleasant to read text. I think it looks better using the VGA. I have heard of people getting nice crisp display with HDMI so I am wondering if I am missing something? Is there any other software that can be used to get better results? Which text smoothing settings should I use? Are there other settings? I am using it on my desk so I guess it is about 2 foot from me. I will post my display details in a minute but my computer details are the following:
2.2 GHz Intel Core 2 Duo
1 GB 667 MHz DDR2 SdRam
i am having trouble installing a Canon LBP5300 printer on my macbook pro running OSX 10.6.8. I tried to use the Add pronter option formPreferences. I have downloaded the software from Canon and it seems to install but the printer is not added. There is no software available from Apple using the software update option.Can anyone suggest what I need to do?
Info:
MacBook
Pro, Mac OS X (10.6.8)
how to install Canon Printer MX340 (Wirless connection)
I am using Canon Printer MX340, My Mac OS is 10.7.3. I can't install this printer via home network. Even i install original installer from canon, keep asking me what is printer administrator password.
Info:
MacBook Pro, Mac OS X (10.7.3)
Is there a way to install/convert Brother laser printer to be an Airprinter?
Info:
MacBook Pro, iOS 5.1.1
Cannot communicate with the printer, or the printer is not supported. If the printer is supported, check the printer connection and add it again. Then, if the Print dialog box has a [Printer Info] button, acquire the printer information.: 10322
Info:
Mac OS X (10.7.4)
I'm getting one for school and i'm going to have to carrying it aroound quite a bit, so the 11-inch seemed appeling at first, but then i noticed that there is a few pros to the 13-inch than the 11 inch: There's an SD card slot on the 13 inch, which i could care less about, the screen has higher resoulotion, which i don't really care about eiether, but the one difference was that the 13 inch has two hours more battery life, which kinda got me thinking towards the 13-inch. So what do you guys think, is it impossible to work on the 11.6 inch and should i go for the 13 inch, or should i go with the ultra-portability of the 11-inch?
View 4 Replies View RelatedDoes anyone know if the panel used in Apples 24 inch Cinema display is the same as the 24 inch iMac?
View 3 Replies View RelatedHello everyone, I'm currently looking to buy a 27 inch imac and can't decide whether to get a base i3 27 inch or a refurbished i5 quad core 27 inch. With the i3 I can get the student discount and qualify for the ipod, but the i5 is 23% off right now. Which should I get? Also is there a benefit of getting a 5 series graphics card over a 4 series graphics card?
View 4 Replies View RelatedI installed leopard after upgrading the hard drive, didnt install any printer drivers, ive just found a 3gig printers folder in Library/Printers, whats happening?
View 3 Replies View Relatedmy imac wont recgonize my printers
Info:
iMac, Other OS, printer
I have a ImacG5 (3.1 system software) and need to have OSX 10.5 to load a new printer. Can I load this system software on an IMAC G5?
Info:
iMac, iOS 3.1
I am trying to download a printer driver to connect my mac air (version OS X 10.9.2) with my printer (PIXMA MP250 series). how or where can I download and install one?
Info:
MacBook Air, OS X Mavericks (10.9.2)
