Will Color run properly on a 2010 macbook pro 15 i7?Color minimum display requirements are 1680-by-1050 resolution or higher; dual displays are highly recommended. The Macbook Pro 15 i7 comes with 1440 X 900.What does this means, I won't be able to run Color?
View 5 Replies
i really want to customize my macbook. i want to change the color logo to apple classic color. (but not for a while) the main thing i want to do is something like this [URL] the second picture to last. the guy with a suit and a hat, being covered with the apple logo. i want something like that, only not that image. you get the idea though. where can i get something like this? are they stickers as well? or are they laser engraved? i do not want it permanent on my macbook, since i get easily bored with the same look
View 3 Replies View Relatedbefore switching to Mac, I used an "X-Rite Eye One Display 2" color meter device with software. You can find them most places like Amazon for about $150. The device should still work, but I can't find any software for it for the Mac. After going to the X-Rite web site, I could find no software at all for the Mac as it is only windows based.
Surely someone out there has used a color meter such as this one as they are quite popular especially for graphics artists that use professional graphic monitors. I am hoping someone can tell me how to use my color meter (USB), what software for Mac Leopard I need and how to save the color profile in the Mac OS.
I have an iPad 32GB WiFi and a MacBook Pro as well so I was trying very hard to justify myself in getting an 11" MBA but ending up talking myself out of it. The 13" MBP is perfect for my uses. It's already lightweight and portable as it is. After playing with the 11" in the Apple store, I was impressed on how light it was. This no doubt blows away any netbook or any notebook in it's weight class in terms of size and performance. However, the MBP's battery life, hard drive space, and processing power OUTWEIGHS the reasons of dumping my 13" MBP for the Air. Also, I have it hooked up to a 21.5 Inch HP monitor at home and it's good enough to use as a main computer at home, and light enough to take on the road.
If I needed to lookup something quickly in bed or around the house, that's where the iPad comes in. If I needed to send a quick e-mail, my HTC Evo is already great at doing that. If I didn't have a 13" MBP or even the iPad, I would have most likely went ahead and purchased the MBA. Just now at this point, spending another $1000+ or getting rid of my MBP doesn't make much sense... yet.
I've been lurking MacRumors ever since 'the wait for Arrandale' began and finally decided to sign up now so I could post this thread. I've been a Windows user for a long time now and I have a Win7 rig at home. However, I'll be going to uni later this year so I need a good portable notebook that's suitable for the common mailing 'n surfing, but also for doing some programming in Eclipse (Java) and PHP work etc. I still have my Win7 box at home for gaming and things that require larger screensize, but for the notebook... I feel really attracted to OSX with a MBP.
It will be my first Mac, but my desktop dualboots with OSX and I love it. So that's why I have decided that my school notebook will be a Mac. This is why I have been closely watching the rumors for the new MBPs and ofcourse I was pretty disappointed when I saw that the 13" model still had a C2D cpu... It's not that I need a beefed up CPU in my notebook (... I have a 3.6 GHz quad at home ), but it feels 'wrong' to buy a MBP 13": even the 2009 MacBook has a C2D, so what will the MB 2010 update bring? Is it really worth the extra money? Anyone with a similar situation?
VIDEO - Photoshop CS5 on (2010) VS Macbook Pro (2010)
View 7 Replies View RelatedI have a 2GHz unibody Macbook. I don't know how to figure out my color profile but I thought this a bit.
I compared my color to my friend's iMac and I noticed his colors were more bright and deep. Is there any way I can upload another color profile and make it look better?
I have an 09 Mac Pro Nehalem, with nvida gt120 graphics card running 10.6.2 with the latest mac pro 1.4 efi and two 23 inch Apple cinema displays (the older DVI kind)
I go into system preferences>displays>color and try to adjust color on my monitors but selecting different color settings on either monitor only affects ONE monitor, the other monitor is essentially stuck at whatever color setting it is set to.
When starting the iMac in the mornings, the upper strip of the desktop appears in the screen color instead of white. What could this be?
Info:
iMac, OS X Mountain Lion (10.8.2)
I installed iwork 08 and everytime i type the letters come in white. I tried changing the color font and everytime i try putting black it always comes up white but when i do it dark blue for example it shows dark blue, it shows every color except for black.
View 2 Replies View RelatedSo last December my laptop got smashed and everything works except for the backlit screen. In fact I can still use this laptop it is just extremely hard since the screen does not light up. The person that smashed it ended up buying me a new laptop so I have this beat up (and I mean the shell is destroyed) laptop with quite a lot of functioning parts.
Now a few weeks ago my girlfriends Grandad spilled a beer on his brand new 2010 Macbook. The logic board is shot so it is almost cheaper for him to buy a brand new laptop.
Would it be possible for me to take the logic board out of my 2008 Black Macbook and put it into his 2010 White Macbook?
At first I thought it was my printer, but come to find out, it is my macbook.It cannot print in color
Info:MacBook, Mac OS X (10.6.8)
My color wheel is ALWAYS on ... NEVER used to come on at all... where do I start?  Â
Info:
MacBook Pro
I Have a Macbook pro 13" mid 2010. I just want to know if it is possible to use the audio port for Digital Input, for recording etc. If not are there any other options for digital input??
View 2 Replies View RelatedMy Mac does not start up properly. I seem to have a virus.
View 1 Replies View RelatedClosed the lid earlier on today and my macbook pro went into sleep mode. about 12 hours later i opened it and the battery was dead. Plugged the battery charger in and pressed the power button. It boots up, disc drive works and it sounds the same as it would working perfectly fine. Keyboard works and there is noise coming from the laptop when i press certain buttons like the volume etc but the screen isnt working. Unable to enter FireWire targert disc mode to fix the sleep mode files which is what i think is wrong with it but i don't have a FireWire and i don't really want to be playing around with my macbook's internal files incase i accidentally touched the wrong thing.
Info:MacBookPro, Mac OS X (10.7)
Anyone have a good color profile for their 9CA4 screen? Tried searching but I couldn't find much. I did come across a couple old ones, but they varied from one another so much that it was hard to judge which looked better.
View 1 Replies View RelatedHas anyone tried to color his backlit? Like this [URL] I wanna do it, but does it really work?
View 12 Replies View RelatedThis is silly.... is there a program which helps you change the color of the apple?
It is white right now as I have the lid of my MacBook open.
I run 4 different screen profiles depending on whether I'm at home or work both day and night. Does anyone else use multiple color profiles depending on where you're computer is?
View 3 Replies View Relatedgive a plausible and vaguely-scientific (read: the plural of anecdote isn't data) as to HOW Glossy screens hurt color accuracy.
View 3 Replies View RelatedI just purchased a new 15" MBP... have been searching for some color profiles, and downloaded a few found here.
However, when I go into my display file and switch between profiles, nothing changes. Also, when I click on different profiles, I get that "bong" sound when I hit the mouse.
This might be a stupid/silly question, but I'm going to go ahead and ask anyways since it's been bugging me all day.Brand new MBP 13", used the stock 250GB HD for a couple days but decided to get a bigger 7200RPM drive. So I know what the screen looked like with the initial factory install of OS X. Fast forward to later this afternoon after I put in the new drive. I re-installed the OS using a retail copy of Leopard instead of the bundled discs for the 13", and after everything was booted up I noticed the color profile was really off. Colors weren't as vibrant as before, and everything just looked so washed out. I noticed it right away, but did all the system updates to 10.5.8 hoping it was just a glitch. After a restart the colors was still off, and I verified via System Profile to make sure the GPU is being recognized etc.
Convinced myself to re-install this time using the discs that came with the MBP.After everything is installed, the color tones are back; much more vibrant colors and no longer looked washed out.So I guess my question is, is the retail copy of Leopard not installing the correct color profiles? If I was to do a fresh install of SL tomorrow would something similar happen (guess we'll have to wait until tomorrow I guess).
My MacBook Pro is connected to the LED Cinema Display. Every time it wakes from sleep, or sometimes after screensaver, it forgets the colour profile. I have to go system preferences and click display and then it automatically uses the correct profile. This happens on both the LED display and the MacBook screen. I am running Snow Leopard, and I don't think I had this issue before upgrading. I googled and found one thread on a different forum about the exact same issue, but no answer. [URL:....] Interestingly it was posted before Snow Leopard.
View 11 Replies View RelatedI have an unibody MacBook I'm wondering if it is possible to use the same color profile that I have on Snow Leopard when I boot into win 7? (the current default color profile on win 7 is terrible!)
View 1 Replies View RelatedI recently purchased a macbook pro. I'm a digital photographer & I'd like to colour calibrate the screen. Can anyone recommend the best calibration system for macbook pro? I'm using Mac OS X ver 10.7.2
Info:
MacBook Pro, Mac OS X (10.7.2)
What setting do I need to change to print in color on a color printer - everything is printing B/W?
Info:
MacBook Pro, Mac OS X (10.6.8)
I was in WORD and messed with the colors in System Preferences and now want to restore the original (pre-mess). I have Time Machine. What files should I restore, if any?
View 1 Replies View Relatedout of the blue about 3 months ago my MacBook(version10.4.11) started refusing to recognize my home wireless. the problem has now reached the point where it AT TIMES will display that the wireless newtwork is on in the toolbar yet the computer will not jump onto the internet. Now it has reached the point where it won't even show that it sees the wireless in the toolbar. I have reloaded all passwords , checked the Verizon wirelss set up, reloaded firefox , checked all firewalls. The wierd thing is that my kids macbook is fine. Mine is the one with the problem.I checked all my settingts to correspond/copy hers and they do. Have zapped pram too. It works fine EVERYWHERE else but home.
View 3 Replies View RelatedI have a 13" MacBook 2.4ghz Aluminium Unibody and the trackpad isn't functioning properly.
I can't highlight text, and the click is tempremental, the right click also doesn't work (yes, I've been into Trackpad System Pref. and it's fine in there)
