My MacBook Pro 2011 stopped booting up. Shows just a white screen. I can get to utilities but disk repair fails, asking me to back up and format / restore the hard drive. How do I back up my data to an external drive?
Info:
MacBook Pro, Mac OS X (10.7.4)
My Power Mac froze, and won't boot. I'm running 10.4. No recent changes, downloads, or updates. Safe mode won't work. freezes on grey start up screen.System CD in drive, won't boot from holding down "c"held down option and selected CD and finally got to disk utility.
Now, when I try to run utility to repair permissions, I get an error stating "disk utility has lost its connection with the disk management tool and cannot continue. Please quit and relaunch disk utility"happens over and over.
When I try to repair disk, I get a red line saying "reserved fields in the catalog record have incorrect date, keys out of order. The volume could not be repaired". Error: The underlying task reported failure on exit (-9972). 1 volume could not be repaired.
Info:
powermac G5 2.5g ram 23 flat screen, Mac OS X (10.4.11)
i was using HP simple save for time machine, but after some time the disk stopped working and it refused to backup any more stuffs, i am damm sure that no hardware problem is there as because my hard disk is new. please do provide me the solution for this.i am showing you the error message.
the hard disk is 500 GB. Verifying partition map for “HP Portable Drive Media”Checking prerequisitesChecking the partition listChecking for an EFI system partitionChecking the EFI system partition’s sizeChecking the EFI system partition’s file systemChecking all HFS data partition loader spacesChecking Core Storage Physical Volume partitionsChecking storage systemProblems were found with the partition map which might prevent bootingError: Storage system verify or repair failed. this error has apperared when disk utility was running on my disk. & the disk is getting ejected automatically after 10-20 secs of inserting it to the USB hub.
Info:
MacBook
Pro, Mac OS X (10.7.4)
I have an iMac G5 that I have previously had both the HDD and logic board replaced by Apple. It has been giving me a lot of spinning beach balls lately and yesterday would spin when I did anything as simple as opening Safari. I had tried to repair the disk in Disk Utility, but it failed after a few minutes. Last night I restarted it and it got stuck on my desktop, but wasn't fully loaded. I restarted it with the Leopard disk and I tried both to "Verify" and "Repair" the disk and neither worked. This morning when I tried it again, the only option available was "Verify Disk."
When I do this I get the attached message. It is an iPhone pic, so I apologize for the quality. I'd like to get this figured out ASAP, as we are moving out of state tomorrow! My other thought was I could try to boot with the Leopard disk and do a Time Machine restore. I'm not sure if that would help though. I don't have anything TOO important on the internal HDD, but I would like the chance to pull it out and hook it up to another computer to sift through it. I'm afraid if I do the Time Machine restore something might happen and I won't have the chance to go through the HDD.
One of my drives is showing issues that Disk Utility isn't catching or can't find. I've heard about Diskwarrior, iDefrag, Drive Genius, etc... but which one is the most comprehensive, is there a "best of breed" disk app out there or one that does more than the others?
View 3 Replies View RelatedI ran a disk check on my MacBook Pro which told me to run disk repair. Since this was my boot HD, I took out my Installation DVD, put it into the running system and started the installation file then selected that I wanted to reboot and start utilities. The system then rebooted, the "chime" came, and then, silence, gray screen with apple logo, nothing is happening.What do I need to do, to get further and repair my hard disk?
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8)
I am trying to check my Harddidk by doing a Verify. So I went to Utilities, select the Harddisk, and then click VERIFY.
Then I the following message pops out: "Disk Utility stopped verifying "Ryan ManUtd" (note: Ryan Utd is the name of my harddisk)
Then it the window panel, there is a message which says: "Error: Live file System repair is not supported"
What does this mean ? Other than that, I can still access the contents in my harddisk ...
Info:
15.4, Mac OS X (10.6.8), 27" iMac - 4GB RAM, 1TB HDD, 1GB ATI Radeon HD, i5 QuadCore
Will I lose my settings, programs, and preferences, if I boot from the system discs and run a Repair Disk from Disk Utility? I've been having some startup problems, like a circle with a slash and it's been mentioned that I may need to do this.
View 8 Replies View RelatedTwo days ago my computer died and I haven't been able to get past the Apple screen since. I've tried starting in Safe mode, etc. that did not work. I just started up using my installation disk and got into Disk Utility. It says it cannot repair the disk and that I should back up as many files as possible and reformat the disk. How am I supposed to back up if I can't start up? I am currently creating a new image of the HD to an external drive but my question is if Disk Utility couldn't repair the disk, with the external drive copy also be problematic? How can I tell before I reformat the whole thing and start over?
Info:
iMac (24-inch Mid 2007), Mac OS X (10.7.4)
So I bought a brand new WD 1TB Elements (USB) to use with Time Machine. I've never used a Time Machine before. I have a MBP13 with a 250GB disk, using the latest Snow Leopard, all updates installed. Formatted the drive to Mac OS Journaled (extended) and set it to use with Time Machine. Works until about 15-17GBs is copied over, than it fails:
1. If I start over it fails very soon after, no matter how many times I retry
2. No matter how many times I reformat it, it always fails
3. I tried one trick I googled - deleting the "inprogress" file - does NOT help
4. SMART status is verified
5. There are no problems if I verify/repair the disk.
Recently had a problem after loading yosemite on our 2009 Mac mini, it won't remember passwords or get email, we've started seeing error messages such as " keychain login cannot be found to store". I tried to do a keychain repair and it fails saying "no such file or directory". Deleted the keychain and created a new one and i get the same errors.
Info:
Mac mini, OS X Yosemite (10.10.1), late 2009, 4gb memory
Disk Utility says there are a bunch of disk permissions that need repairing. I hit repair and disk utility says that it repaired those disk permissions. But when I verify, it says they still need to be repaired.
Info:
Mini 2.4Ghz, Mac OS X (10.6.8)
I am trying to repair my disk so I can install bootcamp, but when I reboot my machine and run disk utility and choose repair disk, it hangs. Does anyone have any ideas ?
View 8 Replies View RelatedMacbook Pro running on OSX Mavericks is having problems.
Today I turned my Mac on, and it started up with a loading wheel and a loading bar. When the loading bar finished, the Mac turned itself off. I tried many times, same happened every time. I then went into OSX Recovery, started repairing Macintosh HD, but the error message saying "Disk Utility can't repair Macintosh HD" came up and now I don't now what to do.
Is there any way I can back up my files in this situation? Is there any way I can repair the disk without having to erase all data and reinstalling OSX? Or do I really need to bring it to a Apple Store for repair?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
Fortunately I got a time machine backup. And its restoring the drive while in Lion recovery mode. Here's what happened... I dont have a router a my place at the moment and so my two phones (iphone 4 and htc android) connect to my internet using my MBP's wifi via internet sharig. For some reason they were not able to get an IP from the mbp. After doing some wifi swtich toggles and forgettig & rejoining the network, i decided to reboot all my devices. I shut down my modem, phones and restarted my mbp. On reboot, after the chime, it showed an unsusal 'progress bar' under the apple logo. The bar progressed to about 10% and then the mbp just powered off. This happened several times even after PRAM and SMC reset.
So now i booted with cmd+r pressed and in recovery mode ran a 'verify disk'. It said the verification stopped and that i should repair the disk. When i tried to do that it said the disk cannot be repaird and that i should back up as many files as possible and attempt to format the disk and restore it with time machine. It is precisely what im doing at the moment.
1. Mbp wont sleep even when internet sharing is off
2. Mbp wont lit the onboard display upon opening it in clamshell mode until i removed the 3.5mm audio cable of my speakers from the audio out port!
Info:
MacBook Pro, Mac OS X (10.7.3), Mid 2010
I just tried to use my MacBook pro but its showing a loading bar and it loads for like 5% and then shuts down.I read the instruction booklet and it says that I should tried to repair the disk or reinstall Lion but when I tried to repair it stops the process and when I try to reinstall its telling me that the disk is Locked...
Info:
MacBook Pro, Mac OS X (10.7.2)
i have a macbook pro 15' late 2011 and it stopped booting. The apple disappear and the. It get stuck in a gray screen.I saw on the web that it would be possible to apply a software fix, disabling the video card. IN my country a new macbook is about 3.000 usd, so buying a new one is not an option for me.
Info:
MacBook Pro, OS X Mavericks (10.9.4), Macbook pro late 2011 15'
G4 won't boot. No startup chime. Power button light goes off right after I power it on. Fans go on and soon switch to high / fast mode.
Tried everything imaginable -- removing all cards, RAM swapping, PMU reset, bought a new 3.6v PMU battery... everything on this forum (I think) except buying a new power supply which I'm trying to avoid.
I just saw that the amount of memory left on my HD just dropped around 60GB, so I used the "Verify Disk" option on Disk Utility, and the output was: Verifying volume “Macintosh HD”Performing live verification.Checking Journaled HFS Plus volume.Checking extents overflow file.Checking catalog file.Checking multi-linked files.Checking catalog hierarchy.Checking extended attributes file.Checking volume bitmap.Checking volume information.Volume header needs minor repairThe volume Macintosh HD was found corrupt and needs to be repaired.Error: This disk needs to be repaired. Start up your computer with another disk(such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
I don't have the disk right now, so is there some other way I can repair it, get another install disk, or anything else? I've been thinking of booting up with a Linux livecd, but can it access the HFS+ filesystem?
Info:
MacBook, Mac OS X (10.6.8)
Having a major issue: similar symptoms to others in the forum - with the fan and the computer not getting past the grey apple screen, I booted from the install disk and got to disk utility, at first all options were greyed out and I could not do anything, tried again a few times and finally got to the point where I could run the verify utility, never given the option to repair. When running the utility it failed and said I needed to repair by booting from the install disk and running the disk utility? Going around in circle here - any advice? I am currently running the Apple Hardware test to see if that shows anything...it has been a workhorse and I've NEVER had any issues with it.
Information:
PowerMac G5 Dual 2Ghz
Mac OS X (10.5.1)
4G RAM
I went thru (I think) all related topics, but my issue is little bit different.
Got Mac Mini (mid 2010) in our company for developming.
About two month ago we decided to upgrade RAM, so we ordered this memory kit: Patriot SO-DIMM Signature Line Apple 8GB (kit 2x 4GB) 1333 At first, I had problems to install stick at all, but after a little bit of magic, I made this mac mini fully operational with 2x4GB of RAM.
Today, Mac have to be restarted, after restart only beeping (long single beep).
And I am back in situaion where I was two months ago. It is working with 4+1, 1+4, 4+0, 0+4 or 1+1 sticks combinations, but not in 4+4. Again, it worked normally for more than two months, detected in OS, everywhere. Tried reset PRAM, reset EFI, OSX: Lion 10.7.4
Info:
Mac mini, Mac OS X (10.7.4)
I have a Macbook Pro (13") running snow leopard and have a partitioned hard drive (half OS X and half Windows 7). This morning I was using the Mac side and was running low on disk space (very low) so I was moving desktop files into folders to free up some space. I restarted the computer to see what the free space was but the computer stopped/froze at the desktop image (no folders or dock appeared. I restarted the computer many times but the finder never opens and all I see is the desktop wallpaper. I donnected usb drives and put in dvds but the finder never appears so I cn do nothing but shut down and start up.
I ran Disk Utility but it found no problems with the disk. I do not have a backup of the important file forlders on my drive and due to low disk space I am worried to reinstall and archive the OS since there may not be enough disk space to archive (only about 220 mb free on the apple side when I am in windows using bootcamp).
Info:MacBookPro, Mac OS X (10.6)
My Macbook crashed so I tried everything to restart it. what finally worked is opening it from the install disk. I performed a "repair disk", and after saying "invalid node structure" and "invalid record count", it says it cannot repair the disk. I don't know what step to take next. How do I see if time machine has backed my files up? Do I need to erase the HD and reinstall?
Info:
MacBook
Yesterday,I forgot to shutdown my computer,so it remained active the whole night...So today morning when i restarted it's not booting..Just the circle is spinning for long time.I have a bootable USB of lion..and tried re installing,but it's showing it can't install...So i tried to repair the hard disk, but it is asking to format my harddsik. So is there any way to backup some of files from harddsik before formatting? I mean form recovery is ther any to copy or abckup my files?
Info:
MacBookPro, Mac OS X (10.7)
during startup, my powerbook will shutdown during the gray screen I've tried booting from an external drive. It goes to a gray screen without an apple logo.I've tried putting it in Target disk mode (to get my files off). But it won't mount on my desktop.Also tried resseting the pram as apple's troubleshooting suggested. nothing differen
View 4 Replies View RelatedMy girlfriend's eMac stopped booting successfully a few days ago. I thing the next step might be to reformat her hard drive ad re-install OS X, but I'm hoping there's some less drastic solution out there. I at least want to make sure I've exhausted all other options. Here's what I know: System is a G4 eMac. 1Ghz I believe (not sure). OS 10.3.9. 256MB RAM. The computer has worked flawlessly for her and her son since she acquired it several years ago. The hard disk was far from being full (around 41% used).The computer "bongs" normally, then goes on the grey screen with the Apple logo ad spinning "gears", then just sits there indefinitely. Some hard disk activity is heard at first, then silence. I started up with OS X CDs and ran DiskUtility. It reports the volume "repaired" successfully, but subsequent "verifications" still show some problems.
Started with "Option" key to see there is some bizarre startup volume selection, but as expected, the only volume shown is "Macintosh HD." Tried to start up in "safe" mode, but never saw any kind of "Safe Mode" indication. Only got as far as it ever does (grey screen, Apple logo, spinning "gears"). I started up in "verbose" mode. The last console message listed is "IP firewall loaded", and the machine just sits there. I started ip in "single user" ode, and ran 'fsck'. The result was the same as when I ran "Disk Utility." We changed the PRAM battery and reset PRAM/PMU. No effect. The computer starts up fine in "Target Disk Mode" and it looks like I can see the files on that hard disk just fine from another computer. As I said, my next step may well be reformat/install, but I want to make sure I haven't missed anything.
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies View RelatedI have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
Running Diks Util on my iMac 10.6.2. i am given this warning.
=========
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
Is it something I should heed and what to do in that case?
