I just reinstalled OSX on my MBP last night and today it wont let me boot into it. When the computer is starting up it gets to a blue screen and nothing happens it just stays like that.
I thought at first it was a permissions problem so i Repaired Disk Permissions using my OSX 10.6 disk and still no luck.
I have just upgraded from a Macbook to a Macbook Pro and just swapped my hard drives. My OSX partition still works perfectly but when i now try and boot to my XP installation the laptop hangs and after about 30s i get the grey screen with a folder with a question mark in it which then blinks/flashes on the screen.
Does anyone know why this has happened???? I have googled it but to no avail. I havent tried to re-install windows yet, I hoping there is a quick fix.
I've been running Windows 7 64 bit on my MacBook Pro for many months now and have had no problems with it, however last week my BootCamp partition decided not to launch anymore and instead it goes straight into Startup Repair. Startup Repair is never able to find a problem and shuts my computer down straight after. Now I'm stuck using OS X without the programs and such I need.
View 6 Replies View Related1) I have on one of the drives a separate OS X partition to boot from (10.4.11). It hangs just as it gets to the desktop and goes no further. I never get a menu bar or a pointer or any of my desktop icons. The booting never finishes. I've tried to re-install the OS, except for problem number 2.
2) When I try to boot from my Mac Pro CD ROM, it does the same thing. It gets to the blue desktop and stops there. No pointer, menu bar, or anything. So I can never get to fix problem number 1.
My main bootable drive in bay 1 still boots just fine, although it frequently seems to take a tad longer. But it does finish the booting process so I have a partition to work with.
I recently replaced the stock cooler on my X1900 graphics card, and that's when the problems started, though I'm not clear how that could be the cause.
how i can change the icon for the windows partition when booting with the alt key? I already replace the icon under MacOSX but that doesn't have effect. It works fine on the OSX partition,
View 6 Replies View RelatedI have MacBookPro Unibody 2.53 ghz 15" 4GB and 320 GB
-Partitioned it with bootcamp assistant to Mac(220gb) and Windows(100gb)
-loaded Windows vista on bootcamp partition
-Installed VMWare fusion to use windows vista from bootcamp partition
-All my docs pics are in mac partition
-With vmware i can access files from windows and mac but when i need to boot directly into windows i should be able to use the docs and pics from the mac partition directly.. (eg i am using picasa to arrange my pics i should be able to get the pics folder mapped in windows somehow.
I have a G3 Pismo laptop with a 30GB drive. The drive has an OSX partition and a classic partition. However, it recently quit booting form the OSX partition and will not mount this. Disc Utility run from DVD will not repair it. I have used Tech Tool on it three times. After the last "repair" Tech Tool said the volume passed, but it still doesn't mount. I tried using it in Target Disc mode with my G4. Still, only the OS 9 volume mounts. Toast will not create a disc image, so I guess I'm screwed. My only options at this point are older classic utilities. Is there any chance that Disc Warrior for OS 9 will get this volume to mount so I can copy things, format,and reinstall?
View 1 Replies View RelatedI did the Bootcamp thing, partitioned the drive and installed Vista. Everything went well and Vista works just fine. But everytime I boot into windows, I get partition errors before it boots.
For example it says:
"Warning: Unrecognized partition table for Drive 80. Please rebuild it using a Microsoft-compatible FDISK tool (err=4)"
It will come up 3 times, and then boot into Vista. Both OSX and Vista are working fine, but something is definately wrong though since I am getting this error.
Just installed Windows XP using bootcamp and usually no problems switching between operation systems. Recently started using an USB modem for my wireless internet connection. Internet works on both Mac and windows through the modem. Now the problem is whenever I restart or switch on my computer, it shows a black screen if I choose windows partition to boot. No problem if I start through mac partition. If I unplug the USB modem, everything goes fine and I have to plug the modem after starting windows. Is there any solution so that I can permanently plugin the USB modem and avoid booting problem?
View 6 Replies View RelatedI noticed that in disk utility in the install disk, you can drag to change a partition size. Does this erase data?
View 2 Replies View RelatedG4 DP 450 booting straight to firmware command line and I'm not sure how to proceed from here. Unable to boot from CD.
View 4 Replies View RelatedHave a macbook pr 17 with bootcamp.
the osx 10.6 partition is giving errors (the black and white multi language message that tells you to hold down the power button..)
have done a permissions repair, run techtool from a boot disc, all have failed to repair.
next step is for me to reintall snow leopard, and as i have no dual layer disks or usb keys i intend to install from external usb drive using the instructions here:
http://osxdaily.com/2009/09/02/insta...t-a-dvd-drive/
But how do i format the drive from within windows as boot recognisable from mac?
i have partition magic and cannot see ny option for osx extended or �GUID Partition Table?
I recently made a clone of my Windows XP Pro SP3 installation (its roughly about 14GB according to Finder/WinClone) so i made a 80GB partition on my 320GB drive and it gives me this error message:
the WinClone came from a 500GB internal drive and ive gotten winclone images to restore to a MBP before but not sure why its giving me this error code, anyway to restore the image to the new partition (which was created with Bootcamp) as i no longer have access to the old machine it was running on.
First some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.
And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.
I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.
Ok, so here's my questions.
1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?
2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?
3.) If I do create the partitions Manualy, will bootcamp still work correctly?
4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?
I know all of the questions were stupid, but there isn't any info on the web about it.
So my iMac came with a 1TB hard drive and I installed Windows 7 x64 but only gave it some 93GB. I have a two-prong question:
Can I add a third partition to my drive after I partition for BootCamp? My main partition ("Macintosh HD" by default) is over 900GB large and I'd really like to cut that up into 2x450GB, for example, in addition to the 93GB BootCamp partition.
Second, once partitioned, is it possible to resize the BootCamp partition to make it bigger after it has been set up?
Got my first MacBook Pro about 2 months ago and I have been enjoying it to full effect, installing programs such as logic studio and photoshop cs5 on it. Recently, however, I decided that I would like to access some of my windows based programs when I am on the road and don't have my desktop pc with me. So I bought a fresh copy of 32-bit Windows 7 Ultimate and sat at my macbook, put the disc in and then loaded up Boot Camp. I went through the menu options, decided that I wanted a 50GB partition, leaving my Mac OS drive at 182 GB with 83GB to spare. However, when I started partitioning, after about a minute it stopped and this error message appeared: "The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.".
I tried cleaning all my temporary files and deleting some files in my downloads that were quite large and I restarted my machine. The problem persisted. Is there a solution to this problem that does not involve doing all this rubbish with a fresh install of Mac OS? I don't have any method of backup apart from a couple of 4GB flash drives..
Partition failed with the error:
Could not modify partition map because filesystem verification failed
^ My windows bootcamp messed up so I deleted it and tried to install a new one but I get this message. Does this mean that there is something wrong with the hard drive?
I have just recently deleted my Bootcamp partition in Disk Utilities, and now im trying to increase the partition size of my Macintosh HD drive. When i go to the partition map and try to increase the size. The same error always appears. "Could not modify partition map because filesystem verification failed" I have attached an Image of what my partition map looks like right now.
View 2 Replies View RelatedI recently installed MacDrive on my Windows Vista X64 partition so that I could access my iTunes Library on my Mac partition. After installing iTunes on my Windows partition and pressing shift while it opened, iTunes asked me for an iTunes library file ending with the extension ".itl". Now, I do not have any files ending with this extension in my iTunes folder on my Mac partition. Is there anything I can do to make iTunes on Windows to read my music library on my Mac partition?
View 5 Replies View RelatedI am dual booting XP Pro and OS X on my NC10. I have XP Pro installed on the main partition with a FAT32 partition for files that can be read by both OSes (see attached image for two views of the partitions). I then installed OS X on an extended partition. Unfortunately, I had another 5GB partition also on that extended partition. I now want to delete the spare 5GB partition and non-destructively reallocate the space for the OS X partition - I want to expand it to be one big partition with my bootable OS X install still on it. Unfortunately, I can't find any way to do this in Partition Magic. Is it possible with GParted/BootItNG/iPartition or any similar software? If so, which and how? The NC10 has no CD drive so solutions that work from OS X or XP or a bootable USB stick would be preferred.
View 3 Replies View Relatedcould not modify partition map because filesystem verification failed" I am trying to partition my hard drive to set up an XP system on it (I know, but it is for AutoCAD, sorry). Anyways, when I go into disk utility, and try to set up the partition, it fails. I have a newer uMBP, 375 free GB (trying to set up a 75 GB partition) and it just wont work. Weird. Nothing seems to be online about the problem.
View 11 Replies View RelatedI recently bought my mother a Macbook. It was a store display one but she had no problems with that. Anyways when we first boot it up I noticed that on the desktop there is a Time Machine disk. So I openMacintosh HD that there is only 17 gbs free out of 33 gb, so I check System Profiler to see if there is a smaller hd in there but the it says that the hd is 150 gb.
So I'm wondering how to delete the time machine partition and resize the Macintosh HD partition so I can give her the most space she can get.
Is it possible without having to reformat my whole disk aka put osx back on there again?
View 3 Replies View RelatedI have a 13" MBP with a 250 gb hd, I partitioned the HD 25gb for Windows XP shortly after I bought it. I was unable to install my copy of windows, contacted apple after exhaustive search as to why... Long story short, I now have Vista to install... When I went back to Boot Camp Assistant; partition was gone. Researched... ran disk utility, repaired and erased partition. Bootcamp HD now shows up in desktop, still not in bootcamp assistant. Since I am unable to locate in assistant; would there be any problems with just installing Vista off the install disk by restarting? Any ideas what to do if this is not a good idea (short of restoring)?
View 4 Replies View RelatedIs it possible to sync one's OS X iTunes library across Boot Camp into Windows? I would like to have the same library on both my Windows and OS X partition, and by library I mean having the same ratings and play counts across both partitions in addition to the actual music. If this is possible, how can it be done?
View 3 Replies View Relatedcurrently have 2 partitions bootcamp and lion. and have read alot about how if you create said partition it will mess up windows bootcamp. but have yet to see any actual answer as to how to creat the 3rd partition. correct me if wrong but is it better to delete bootcamp creat partition then install bootcamp and restore from system image?
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
I am trying to format my external drive to have (2) partitions. A NTFS for backing up my Windows computer and a HFS for backing up my MacBook Pro.
This is what ive tried:
1.) Create 2 partitions on my Mac in Disk Utility. 1 partition HFS, 1 partition FAT32. After doing this both show up in OSX but neither one shows up in WinXP. I was hoping the FAT32 would show up in WinXP so I can convert it to NTFS.
2.) Create 2 partitions in WinXP using Disk Management. 1 partition is NTFS and 1 is FAT32. Connected the drive to my MBP and both partitions mounted in Finder. I then opened Disk Utility and tried to "Erase" the FAT32 partition to HFS. The process seemed to be working but then it changed the name of the partition to disk1s1 and nothing else. The partition doesnt mount in Finder or WinXP.
3.) Create 2 partitions in WinXP using Disk Managment. Both partitions as NTFS. Connected to MBP and both partitions mounted in Finder. Opened Disk Utility and tried to "Erase" one of the NTFS systems to HFS. Same thing happen as #2, renamed the partition but didnt do anything else. The partition doesnt show up in Finder or WinXP.
I had my hard drive partitioned into 2, where one was mac the other windows xp. I received this macbook as a gift from my sister so i wanted to reformat everything into mac. I popped in the Mac OS x install cd and just installed it. Now there is two hard drives and I am not able to re-partition it where i can bring it back to one again...I was suppose to delete windows first before re-formating my macbook.
View 9 Replies View RelatedSo here the deal. I have a single hard drive in my MacBook Pro. Its made up into 2 partitions (one for os x and the other for data). I want to make the OS X partition into 2 separate partitions (so I'll have a total of 3) without erasing any data. I want to use that new partition to install windows. When I select the OS X partition, and set it to format at NTFS, it says the size cannot support the filesystem (25GB in this case). What size does it have to be then? Or should I format as FAT32?
I know FAT32 has a 4GB file size limit so I don't want to do that because I want to install some games on the Windows partition. How should I go about doing this?
I've got a MacBook Air (not mine) with me at the moment and I believe it's got quite a big problem.
Basically when you turn the Air on a black screen display for a couple of seconds with the chimes playing then a white screen appears at which point you can go no further.
I've tried everything; pressing the Option key to try and display the two partitions on the SSD, resetting the PRAM and SMC, pressing the D key and pressing the C key to try and get the install disc started in the connected SuperDrive. Nada.
I was wondering if anyone has any ideas on this problem before I take it to KRCS in Nottingham for diagnosis and repair? Maybe there is something I've missed or others have had a similar problem?
