MacBook Pro :: Can Boot From 3rd Party Expresscard SD Adapters
Aug 19, 2009Does anybody know if it's possible to boot from these 3rd party Expresscard SD adaptors that operate as a USB device?
View 2 RepliesDoes anybody know if it's possible to boot from these 3rd party Expresscard SD adaptors that operate as a USB device?
View 2 RepliesExpressCard missing in the last 2 MBP 15" update. i've a great CF reader adapter for that slot. so any CF to SD card adapters if i decide to upgrade to 15" i7 ? i use pro DSLR and that's all CF world.
View 8 Replies View RelatedOk I connected my Air to a LG drive GSA-E50L USB DVD drive. It seems to work fine in Windows and OS X. For booting it does work with the OS X dvd's.
However, it refuses to boot from a Windows XP installation disk.
I've tried different boot disks aswell. No luck.
When I boot pressing the option key, the DVD drive is one of the options. It says "Windows CD". I then choose it. It starts reading the CD and then the apple sign is displayed. The apple sign changes into a stop sign and goes back to the apple sign again.
Does anyone know what is going on?
Has anyone been able to boot from a Windows disk with a non Apple USB drive?
Just curios if you can load OS X onto an expresscard and then boot up off of it with a 2.16MHz MBP?
View 1 Replies View RelatedI have an iBook G3 Clamshell 466MHz with 192mb RAM and 10GB HD. I recently updated the OS from 9.2.2 to Panther on a single partition. The upgrade went flawlessly.Then I purchased a 512mb RAM module from a 3rd Party Vendor and after fitting it discovered the iBook no longer boots past the flashing folder/?.
I removed the new ram and replaced the 128mb module but haven't been able to boot past this flashing folder/? icon. I've zapped the PRAM, reset Open Firmware, disconnected the Keyboard then booted, reset the PMU (need to do this each boot or I see black screen only) and tried to boot from the Panther Disc #1 holding the 'C' key. I also tried TDM with my Intel Mac Core 2 Duo but couldn't boot past the flashing folder/? icon.
I just hate getting scratches easily on my brand spanking new power adapter. Although I'm really, really careful now, I wish Apple upgrades the cheap looking adapters in the near future.
View 12 Replies View RelatedI noticed awhile back that apple store had 2 dif mag safe adapters. Now i see the 60w goes with the 13 and 85w goes with the 15 and 17. So my question is it bad to interchange the adapters between the 2 dif models?
View 1 Replies View RelatedSo I just got an Express SD reader, but it the SD cards don't show up. I guess I need to activate the Expresscard reader then?
View 7 Replies View RelatedFigured I might as well put that slot to use. What do you keep in yours?
View 24 Replies View RelatedI have MBP 13", 15" and 17" - from 3 years old (santa rosa) to the current models. Can I share their power adapters? If buying new power adapters, am I best to buy them all at 17" power?
View 1 Replies View RelatedI have a bunch for home, work etc. Will I be able to use the ones for the MBP with this MBAir? Or is it a whole new magsafe thing?
View 7 Replies View RelatedIf so, how do I avoid frying my macbook air and other electrics, like my iPhone, camera battery, and shaver. ?had that built in or something, so as to just buy a weird 3-prong adapter...I saw the set of adapters available on Apple's site, but those would then only work for my laptop charger. I'm sure I could find the UK 3-prong to US-adapter... but what about voltage? I've never traveled overseas and had to convert power before
View 11 Replies View RelatedAfter purchasing the alu. macbook, I find my self buying all the necessities: again. quit frankly its getting old. It does seem like most apple computers are what some might call overpriced to begin with, but I am ok with that; you get what you pay for and i don't mind paying the mac tax. But as I purchase the odds and ends required to use my computer in the real world, it seems as if apple is taking advantage of the fact that our computers lack some of the hardware to connect with to overhead projectors, etc. (as most PCs can). I mean $29.99 for a 3 in. piece of plastic and wire???
I was just wondering if anybody has found an alliterative source for adapters?
I'm thinking of hooking up a second monitor along with my Macbook for home use, probably just an older CRT. What kind of adapters do I need to do this?
View 3 Replies View RelatedIS THERE A apple Mini DisplayPort to HDMI adapters
Info:
MacBook
Pro, Mac OS X (10.7.4)
How do you remove an ExpressCard that sits flush?
View 1 Replies View RelatedI used to do DSLR photography with CF, but fell out of love with it and sold it, so now it's back to regular old SD for my point and shoot. I'm looking for a card reader that obviously supports SD, but I'd like some type of all-in-one so I can throw most anything at it. I'd also like it to be flush with the computer when inserted.
View 4 Replies View Relatedthe mini displayport to DVI and VGA adapters from monoprice.com. I received them yesterday, and I was able to test them today with the Dell 24" LCD (1900x1200) at work, and both were able to drive the screen.They aren't quite as spiffy looking as the Apple-branded ones, but the combined total with shipping for both was a less than 1.5 one of the Apple ones.
View 2 Replies View RelatedI have the flash mount Sonnet 2 in 1 Card Reader ATM but would like to add some USB ports but the card has to be flash mount.
View 1 Replies View RelatedNothing is happening when I connect this cable,how do I get the tv to recognise my macbook pro...
Info:
MacBook Pro (15-inch, Mid 2012)
I've got a "little" problem here. I've been wanting to buy a good Capture Card that I can use for my 360 all year long, and I recently found out about the Intensity Shuttle.The Intensity Shuttle requires a USB 3.0 Port which I don't have on my Macbook Pro. I was wondering that if I used an express card, would I be able to capture video via the Intensity Shuttle?
Intensity Shuttle:[URL]I would love you if you could find a way for me to use this.
There's enough external space for two USB ports in the expresscard 34 slot. Is there a card that has two USB ports and is flush with the edge of the laptop? All I can find are dual stacked ones that stick out like this:
View 15 Replies View RelatedI just did a search and found nothing but an extremely lengthy thread that makes no sense and doesn't even answer the question. I just want a simple answer here: I have a new 17" '09 uMBP. I want to use my eSata external hard drives. What expresscard adapter should I buy? I was transferring stuff over via USB and was horrified: 25 minutes to transfer 20 gigs of pictures! 20 gigs should take no more than 5, maybe 10 minutes tops over eSata (as it did on my old laptop). So which eSata-Expresscard actually works for the uMBP's?
View 11 Replies View RelatedIs there one that works?
View 8 Replies View RelatedI just ordered a sonnet express card 21in1 card reader for my early 2009 MBP 15" (the last one with the express card port) anyhow I chose this one because it sits nicely flush with the MBP body. My question is would it be ok to leave the reader in the computer all the time? (without the card) i have my computer sleeping like 97% of the time. I would like to just leave the expresscard in there but dont know if this would be ok.
View 2 Replies View RelatedI've been following many threads on Mac Rumors for a while and thought I finally post something (hopefully) useful for others and in hopes that I can get a meaningful answer. So please don't flame me if this may be a newbie question... here I go:
So I have a MacBook Pro 2.2 Ghz Late 2007 computer, equipped with a 500GB WD Scorpio Blue HD and 4Gb of RAM. What I do with this computer primarily is graphic design and editing (Photoshop, Illustrator, InDesign, Final Cut Pro, etc...) and some amature music production (Reason, Garageband, Djay...)
I've followed the 6gb/8gb RAM upgrade forum for a long while for Mac products and finally bought myself a 6GB upgrade kit from Other World Computing. My package arrived today, and I hate to admit but I'm afraid to upgrade the RAM because of the slight hit/miss ratio I heard about using it. It's usually a good thing to upgrade to something higher I know, but I read that even if I did upgrade, I would only be using about 3GB worth of memory on it and not the full 6GB. Plus, I would lose the dual channel architecture doing this... if that did make a big difference to my heavy use of RAM.
Just today I learned about ExpressCard SSD's and how they can act like a separate HD in themselves. I'm highly interested in a very economical 64GB ExpressCard I researched. They're super fast and sound like a better alternative to RAM upgrading, especially if I can only use a max of approx. 3GB of RAM on my model computer.
So after all of my gibbering and jabber, here's the question:
From your experienced perspective, what's a better option for me to take...
1) Use the 6GB RAM upgrade?
2) Buy an ExpressCard SSD and use memory intensive programs on that?
3) Use the 6GB RAM and buy the ExpressCard SSD together?
I have a new 2010 MBP and I'd like to hook up two external monitors to it, more specifically, two ASUS VW246H 24-Inch Widescreen LCD Monitors. Either via HDMI or DVI connections. I've found various usb monitor adapters, but i've read that many can't quite 'keep up' and I really can't seem to find a solid solution out there.
So does anyone have a dual monitor setup they currently use, if so, what are you using to connect the mini display port to both external monitors.
I purchased a replacement magsafe 85w adapter for my MacBook Pro and was wondering if the new cable requires you to have your laptop closed to initiate the charge process on your computer.I notice that if I attach it with my laptop powered on and my computer open it will not initiate a charge (light up on the cable or show the charge icon on screen). If I power down my laptop and close the lid, disconnect and reconnect the magsafe cable the light on the cable will light up and initiate the charge. I tried this also on sleep mode with the laptop closed and the light on the cable started up without disconnecting. I was able to boot up my computer and continue working and the charge continued but I had to initiate it first with the lid closed either in an off or sleep mode. Just wondering if this is the new norm as I just moved from the old "T" style magsafe to the new "L" style magsafe.
Info:
MacBookPro, MagSafe
I tried installing a Dynex eSATA II ExpressCard Adapter that I bought at Best Buy. I downloaded the drivers off of the website and tried to install them and got an error message: the following failed: run preflight script for Sil3132 Mac OS X Driver. Contact the software manufacturer for assistance.
View 9 Replies View RelatedRecently upgrading, I bought the newest MBP 17" specifically because it still had the expresscard slot (thinking having eSATA capability would make it the only pro laptop in the new lineup). I don't need my storage to be portable, I edit at home. Being new to RAID I've been researching and asking questions. I want to get the best setup for my money. People have recommended FW800 but that doesn't help me need to get the most speed possible, I feel eSATA is faster. I also want the redundancy in case a drive crashes. But the MBP only has one expresscard slot.
Does this mean my bandwidth is limited to one 300Mb/s channel? i.e. Should I not even consider RAID0 on a MBP since the bottleneck is 300MB/s? Barefeats recommends this adapter saying it's the fastest they tested at only 200MB/s! So what advantage will stripping give? It seems with only one available eSATA channel the MBP doesn't have many options for professional storage (although still faster than FW800). What would people recommend?..........