How would I go about this if I didn't want to do it myself? Could I get someone at the Apple store to do it for me? (if so how much would that set me back)
Also, I'm not too good with hardware and stuff like that, would it be easy to put a new and bigger HD in myself?
I'm planning to install a second internal HD in the optical drive space to accompany my 80gb SSD. The basic process of physically installing the 2nd HD I understand. [URL] But what I do not "FULLY" understand, is the process of "installing" the new HD when you boot the computer. - general and specifics This may seem like a "unnecessary/dumb" question, but the main reason why I'm asking this is because I'm installing this 2nd HD from the optical drive space. Is the process in installing an HD the same as if I were to install it in the original HD area?
View 2 Replies View RelatedI have a 13 inch Aluminum Late 2008 MacBook. Processor 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Software Mac OS X Lion 10.7.4 (11E53). Currently I have a 160 GB SATA disk as my hard drive a d 4 GB of memory. (Is it time to upgrade or what?) I recently bought a Western Digital 1 TB internal hard drive to replace my exisiting internal hard drive. I spent a lot of time last night trying to first- connect this new hard drive to my computer so that I can then clone the existing hard drive and then hoping that I would get that done so I could install the new hard drive. No such luck.Â
My current hard drive is partitioned as follows:Â
Name:Â Macintosh HD
Format: Mac OS Extended (journaled)
Size: 132.5 GBÂ
Name:Â BOOTCAMP
Format: Windows NT File System (NTFS)
Size: 26.69 GBÂ
When I was partitioning the new drive I did so as follows:Â
Name: Macintosh HD
Format: Mac OS Extended (Journaled)
Size: 973.51 GBÂ
Name:Â BOOTCAMP
Format: MS-DOS (FAT) --- This was the only option that I was given that I thought would work. I did not have the option of "Windows NT File System (NTFS) to choose from. Question # 1: is that going to be a problem? I only run 1 program on Windows and that is the only reason I have BOOTCAMP on there at all. However, I do HAVE to have that program. Like I said it didn't give me the option to choose Windows so I didn't know where to go with this. Any help with that would be awesome.
Size: 26.34 GB (I just used the same size that was current, or close to it.) I connected the Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives. The first one went through fine. (It took 2 hours and I went to bed before it finished.) This morning I woke to see that it had gone through well. I then started the process with the BOOTCAMP drives. However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BOOTCAMP drive. Question #2: Is it because of the Format type I chose when partitioning?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
I Have a MacbookPro OSX 10.6.2 2gz intel core duo, recently i extracted a dvd burner from a crapped out dell laptop, it was the exact dimensions and looked identical to the old mac cd burner, so I installed it in my mac, and now my mac cant see the burner, When I go to "About this Mac" in the apple icon and click on disc burning it says "no disc burning device found". I wonder if theres a driver of some sort or do I have to re-install osx to get this working?
View 6 Replies View RelatedI have 2 internal drives, one which is an ssd and full. The other is a 1TB internal hdd and I use it mainly for everything that aren't programs.
Now that my ssd (boot drive) is full, I want to install my programs to my internal drive, but I can't find the option to do so. Specifically the program I'm trying to install is XCode.
I have a macbook pro 13".. the HD crashed and i had to send it out for recovery (the platter was f'd up) and the optical drive stopped working.
i have a thingy i use where i pllug in the internal HD and it becomes a USB on my imac... can i run Tiger and install it to that specific HD and format it as well? then when i plug the HD back into the macbook it will work?
I just got a mac pro last week. The day i got it i installed a 1TB WD sate drive in bay 2....No problems it works great.....However, today i picked up 2 more 1 TB WD drives and attempted to install into slots 3 and 4... PROBLEM!The drives are showing up as external/firewire drives- not internal drivesCan anyone help with what i should do?Oh, and when i restart, they come up uninitialized.- But the problem anyway is that they need to be seen as internal
View 3 Replies View Relatedi just installed vista home premium. everything seems to work fine except for my internal speakers it says that they are installed but they don't work. the name that shows up is high definition audio device.
View 1 Replies View RelatedHas anyone run a 20 or 23" display with the Air? Ok? Closed or open case? Wireless keyboard and mouse, too?
And, general impressions about running photo programs like PS, Elements, Aperture (not video, I think I know the answer to that, but correct me...).
In other words, where does the Air hit the wall for reasonably fast digital photo work? 1.6 or is 1.8 really a difference maker for this?
I have a chance at a cheap Apple 20" alum monitor. If the Air can really handle moderate photo work and run a big screen well, that would give me a nice set-up to be sure.
Does anyone know of a disk/ssd upgrade for the macbook air rev c bigger than 128GB? Is anything available?
View 6 Replies View RelatedIt's getting a bigger screen, more memory, around
[URL]
[URL]
Other notes:
[URL]
[URL]
This might make a better accompanyment to a 17" MBP than the Air does...
When I press the volume hard keys the volume indicator pops up on the screen but doesn't move the volume bar any, whether its up or down. It's also showing a circle with a slash below the bar graph which doesn't go away.
View 1 Replies View RelatedLooking to buy a bigger hard drive for my MBP 15" base model (Late 2008) and was wondering what the max is for that particular model? I currently have a 250GB and am running low on space and needing to upgrade. Also if you have any info on the specific specs i need from a HD that would be awesome.
View 3 Replies View Relatedwhat i need to be able to play items on my tv ,like movies and videos from my macbook ,did i miss something ?
Info:
MacBook Pro, Mac OS X (10.7.3)
I have a Macbook pro 2010, Lion OS. It has been working good until I conected the computer to a TV. I´m conecting my computer, frecuently, to some televisions. The last time I did that the configuration of my screen changed a little bit. The screen looks bigger than my display and I can´t see the hole screen at the same time, I have to move the arrow with the trackpad in order to see some corner of the computer. I tried to fixed going to the display preferences
Info:MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.4)
I recently purchased a new SSD and would like to input that into my MBP 2012. If I have a partition on my external HDD that contains the carbon copy of my MBP, am I able to clone it into my SSD after I have installed it in the MBP through the USB?Â
Internal HDD --> External HDD
Place internal HDD into optibay, and place SSD into the harddisk slot
Connect External HDD via USB to MBP
CarbonCopy to new SSD via USB from External HDD
Format Internal HDDÂ
Will this work?
All the tool bars are ways too small. It's painful to read. I know there're ways to work around this problem such as decreasing the screen resolution, or use the Zoom feature. These are only workaround solutions because decreasing screen resolution makes pictures look less sharp, and the Zoom feature is not that fun to have all the times on your screen. It looks like Apple should come up with a permanent fix, as it is clearly not acceptable fix. Hopefully some Genius will come up with an App that offers a better resolution.Â
View 1 Replies View RelatedI have a late 2006 MacBook with 120 GB of memory. Is it possible to swap out the hard drive for something faster, with bigger memory?
Info:
MacBook, Mac OS X (10.7.4)
How best to upgrde to bigger hard drive on macbook pro? What is the cost if take to Apple store?
Info:
MacBookPro, Mac OS X (10.7.1)
how do I make the size of all texts bigger on the screen, I have an early 2014 11" macbook air upgraded to yosemite 10.10
Info:
MacBook Air, Other OS, works great, in good shape
i have a 13 inch macbook pro, and i want to set the screen size bigger than 1280 * 800, to maybe 1600 * 1200 or something. obviously i cant fit more than 1280 * 800 pixels in the 13 inch MBP screen, but I want it to function as kind of a 'cropped' screen - so i'd have to move my trackpad around the corners of the screen to see more of the desktop. i know it will look like crap and be a bit cumbersome, but i don't really care about that. is there any way to do this?
by the way, i don't NEED the ability to use my trackpad to move around the screen. i don't plan on using my MBP like this permanently, this is just for experimental purposes.
The title says it all - getting a 2.4Ghz 13" MBP, 4GB Ram (rarely if ever need more), and thinking of a little boost somewhere over the 500GB 5400RPM drive. $300 for a 128GB SSD is pretty high, especially considering I'll probably max that out far too quickly. Is there any bigger bang for the buck performance upgrade over the Momentus XT?
At this point I wish I just got a MacPro instead, this wouldn't be a question. I have a new 17"uMBP, bought specifically to take advantage of eSATA through the expresscard slot. I do photography and video work. I bought the best possible card, the Sonnet Tempo dual eSATA, to offer highest transfer speed and because it's the newest technology. To accommodate my media I bought a OWC Mercury Elite Al-Pro 2TB RAID 0. It's great. I wish I got the Qx2 RAID 5 but it's a little pricey and expensive to upgrade, but at least it has redundancy. I need to have a reliable backup solution. Drobo is expandable but I've seen so many poor reviews. I could buy another Al-Pro 2TB RAID 0 and connect them both and do a software RAID 1 with them. Or I could buy a cheap 2TB eSATA external and do daily backups. I could also get a dock and fill up drives as needed. Is there really an advantage to mirroring other than if my drive fails in the middle of a job? Wouldn't the software RAID needlessly slow down my system? Even if I did get the Qx2 RAID 5 it is bad to rely on such a system by itself to both store and backup my media or is it in itself a very reliable solution?
View 6 Replies View RelatedThe red green and blue buttons in the top left of a window. Is there any way to make them bigger like in 10.6. They're too small.
Info:
MacBook Pro, Mac OS X (10.6.8), external battery pack
I got a Matte screen 2010 MBP. It comes with higher res screen. I personally find the text to be a little bit too small for my liking. Is it possible to uniformly make everything bigger so the higher res only make image and text sharper and not smaller than original resolution?
View 2 Replies View RelatedI bought a macbook pro off ebay it's a 15in model # A1211 and I just put a new hard drive in it. The hard drive is a seagate 500gb 7200rpm. The real question I have is that I cloned my hard drive but in disk utility I cant just move my hard drive down extend my space to fill in the empty space for my mac partition. Also my hard drive is dual boot via bootcamp with windows 7.
View 1 Replies View RelatedHow can i make fonts bigger in finder menu and safari menus . everything is very small
Info:
MacBook Air, Mac OS X (10.6.8)
Just recently my cursor started moving erratically and it's difficult to click where intended. The screen gets big and small without my touching the trackpad. What's wrong - is it a virus or a malfunction in the trackpad? I have an OS X 10.9.5
Info:
MacBook, Mac OS X (10.6.8)
It says that the drive has changed and I have to unmount and then remount it, but i don't really know how to do that and it doesn't seem to work
View 4 Replies View RelatedI want to keep my applications etc on one internal HD and use my second internal HD as a back up.I am a graphic designer, and i have been backing up to an external LACIE Porche 160 Gig firewire HD. This has worked fine, but...My second internal HD (112 gig?) is still loaded with 10.3 and has adobe CS2 on it along with some other crap that I no longer need.I have loaded Adobe CS3 on my primary drive and have all the files I need on that one...What is the best way to set up my second HD as a "slave" drive to improve the performance of my G5 dual 2 Ghz??Will there be any issues now that I loaded Leopard on the primary HD?
Information:
Power PC G5 Tower 2 Ghz dual processor (2004?) with two internal hard drives
Mac OS X (10.5)
