For some reason when i try to open firefox its says page cannot be found. The signal is very strong and it says its connected. There is surrounding routers in my neighborhood so i connected to a other one and it works just fine. I was having the same problem this morning with my desk top which is a PC it said something about my ip address but it repaired itself.
View 1 RepliesI just built a PC that actually works. However, I was really cheap and didn't wanna buy a wireless access card, thinking I could connect to an extra router and use this router to connect to my other router that's network enabled. Is this possible, and if so, how would I go about doing it? I tried googling it, but I dunno what this is called.
View 2 Replies View RelatedI have a Netgear router that I want to set up so it gets access from my other router (SMC I think)I don't exactly know what to do now
View 15 Replies View RelatedI recently sold my old MacBook to my brother. He has 2 PCs and 2 iPhones, both of which connect perfectly to the internet through his modem/router (a BT Business Hub). The Mac, on the other hand, just won't connect to the internet. Airport connects to the router, but cannot load any web pages. Connecting by ethernet does not appear to help. This Mac will happily connect to any other router except this one.
View 4 Replies View RelatedMy router gateway address is 192.168.1.254 and i can access it via my windows pc by keying in the ip address in IE/Firefox.
But when i try to do the same on my macbookpro, i cant connect.
I recently changed the router password and now am unable to connect to it. I'm certain that I am putting the right password in and my router is available to connect to but it keeps booting me out. My 2 other macs aren't having any issues connecting to my router. The one that won't connect is a 5 year old macbook. The other two are both 2-3 years old and connected to the internet right away after I put in the password.
Info:
MacBook, Mac OS X (10.4.11)
I am a new Mac user with a new Mac book pro. The Mac was connecting to wifi until today. Today I added another wifi connection through mifi hauwaei modem. Since then I cannot connect to my old wifi access point. It connects but not getting the Internet or get to the router using 192.168.2.1. I can still connect to my mifi. My iPhone, iPad and other laptops can connect to my old access point with out any issues. I use zyxel router as my old access point.
View 4 Replies View RelatedI have a Macbook Air Rev.C 1.86GHz and just yesterday, it stopped connecting to my D-Link wireless router. There have not been any updates applied to the router or the Mac recently, nor have I installed any apps to the Mac either. My iPhone sees and connects to the router fine, as does my MSI netbook, and my TabletPC too. I have turned the router off numerous times in trying to troubleshoot this, and only for a minute or two, does the Mac see the router and connect getting an IP. It then loses the connection shortly after. I have turned off the Mac's Airport a number of times, I have reset the SMB (I think, using the ctrl/shift/option/Power button while off, letting go, then pressing the Power Button only).
View 3 Replies View RelatedThe Linksys router has a static ip set up to work with the DSL connection and desktop. My macbook pro connects to the router but there is no internet connection! This is pissing me off becuase my mom's cheap Dell notebook connects flawlessly but My $2500 macbook pro doesn't. What do I need to do?
View 5 Replies View RelatedI have a 17 inch MBP OS X Leopard. I had no problems for two years of ownership until yesterday. I could not connect to my router and when I did and it said full bars I still can not go on a website. All it does is wait to connect. So then I noticed that my ethernet cable had the click in tab broken. I bought a new one everything worked fine my mbp and my IMac. Although when I did that it took my mbp a couple minutes to fully function again. About three hours later I had the same issue again. First it got slow, then nothing.
I would open airport it would show that its scanning and finds nothing. I try again, it finds my router connects but no internet. Then it came to the point where it finds my router and I try to connect but no bars show. My IMac works, my ipod touch wifi works, and so does my htc phone. So I am convinced that my mbp has a problem. Also, is it normal for the cd drive to be kind of sticky? I can put the cd in no problem, but when I eject, it sometimes doesn't sometimes only a bit of the cd comes out and I have to grab it and pull it out?
Do I need to have Airport to connect to internet with router d-link?
Info:
MacBook Pro, Mac OS X (10.7.3), lion
I've updated my wireless rounter and also decided to not have it broadcast the network.I can connect to the router no problem by using the option "connect to other network".I also have the box checked that says, remember this network, but my macbook doesn't automatically reconnect after it sleeps or when I turn it off. Would love to understand how to make my macbook automatially reconnect so I don't have to go through the extra steps of reloggin on each time.
Info:MacBook, Mac OS X (10.5.8)
The wireless network I want to join runs through a Wnet R300 router with a 3.5G simcard wireless internet connection. My MacBook will not connect, while all other devices (Kindle, Nokia phone, Mac Mini, etc.) will. I have changed the wireless security on the router from WEP to WPA2 and still no luck. What settings do I need to change?Â
Info:
MacBook, Mac OS X (10.4.11)
I am tryong to use my apple range extender with my xfinity rouder, is this possible
Info:
iPhone 4, Windows XP Pro
I have a WD Mybook Essential Edition external hard drive that is dedicated to the Mac that I am trying to connect through USB to my Linksys router (WRT 610N).
I have spent no less than 14 hours on the phone with Linksys, can't get through to Western Digital, and Applecare tells me they don't work with PC hardware.
So I'm trying to connect my MBP to my new Belkin Double N+ (F6D6230uk4) router. I have 2.4 ghz set to b/g and 5 ghz set to n and 20/40hz bandwidth. Last night, when I connected to the router for the first time, I was showing 300mbps, when you Options+click the Airport icon. However, now I'm only showing 145mbps. To be fair, I may have changed a few settings between now and then, but I have no idea how I was able to get 300mbps before. It's as though it's only connecting to one channel, instead of two, which is required for 300mpbs I think?
View 2 Replies View RelatedUpdated to latest security download and now MacBookPro cannot connect to wireless router.iPad works on the router and MacbookPro works on other wifi networks, but it will nolonger work with the actual wireless router that I used to download the latest security software? Is there some security issue I need to address? There is no security/password on this wireless router.
Info:
Mac mini, Mac OS X (10.6.8)
I have a MBP (2007 model) and i recently setup a home network. The router is a Belkin N Wireless router. My laptop is the main computer in my home.
Now my Ipod Touch and my cell phone work just fine with my router; i.e they connect and i can surf the net and stuff, but my laptop will not get on the net once i disconnect the ethernet cable from it.
I've installed a Airport extreme 802.11N Mini PCI-E card. I can see it but can't get it to connect to my router. Do I need a antena?
Info:
Mac Pro, Mac OS X (10.7.4)
So i moved into a new place with roommates who have an existing router setup. The have a pretty fast internet connection and a setup with an older netgear router. One has an old macbook (13-widescreen) and one a sony netbook of some sort or a really small viao.
The both connect to the internet with out a problem.
I have a new aluminum macbook and I can't connect. Usually what will happen is I will get home and have a decent connection for about 5 minutes. After that pages will load but the progress bar will stall. And then within five minutes I can't open anything, and finally it will boot me off, and when i try to reconnect it just asks me for the password which is saved in the keychain and it just does a connection timeout til i give up.
Now the weird thing is this. I tried bypassing the router and direct connecting the cable modem and still nothing. I have gone into the settings, messed with those, rebooted, everything an I can't solve it (both my roommates are not techies so they aren't much help). I have no problem connecting to anyother network. it is a WEP set up.
Since my D-Link G604T Wireless experiences constant dropouts (everytime it is reconnected), I have borrowed a Netgear DG834G v2 router.
I hooked it up and then visit [URL]
I'm on a Macintosh.
My D-Link control panel was at [URL] and that works fine but the Netgear does not connect for some reason.
Do I need to mess around with IPs to make this work?
I was getting tired of my belkin54g router that kept dropping connections, so I went and got a new linksys wireless G router. I popped in the CD, followed all the instructions and when I get to the end of the install it says that the configuration was successful, but it could not verify an internet connection.
I figure it's just a hiccup and try to connect with my laptop via airport- success! I get my homepage. But then, I can't get to any other page at all.
It says it can't find the page, but my network connection in system preferences says I'm connected. I go to my desktop which has the hardwire connection and I can't get on the internet at all, but again, my network connection in system preferences says I'm connected- green light, IP address and all.
So I figured I did something wrong and restored the factory settings on the router. Same thing happens again. WTF? This should have been easy. What the hell is wrong with this thing?
It should be noted that if I type in my IP address, the router info comes up immediately. I am also just connecting my modem to my desktop to post now. My internet connection works fine.
I have AT&T Uverse. They give me a Wirless router that runs all of the phones, T.Vs, and internet in the house. I have an Airport Express that I want to connect through an ethernet port to the AT&T router. Its a 2Wire 3800. I've read up a lot on how you need to set up the DHCP and Static IPs and stuff, but I just cant get it to work.
View 8 Replies View RelatedMy router is a floor away and on the other side of my house and running cables to my room is not an option. So does the Mac mini have the capability to connect wirelessly to my router?
View 10 Replies View RelatedA friend of mine has a Mac Mini (PowerMac 10.1)He wants it to connect to a wireless router.ll the Wireless Dongles I can find have to have the 10.3 or later,is there a dongle that will work on 10.1 or will I have to upgrade his Mac to10.3 or later?f I have to upgrade it, will it effect the performance of the Mac much?
View 1 Replies View RelatedI have just acquired myself a powerbook G4 to use as a server. At home, it can connect to the router (airport extreme) fine with no problems, but now I've taken it down to uni and it is refusing to connect to the router supplied by O2. I have the right password for it and when i type it in, it says that there was an error joining the network. I've changed the frequency of the router multiple times to get it to work but to no avail so was wondering if any of you guys could help?
Just how do I connect a G4 to an Airport Extreme Base station via LAN cable, and then get it to connect to an existing wireless network (that's using a non Mac router). It's just that the existing airport card is painfully slow with a NAS and as I had the AE kicking about I thought I'd use that rather than buying a new PCI AE card.
View 5 Replies View RelatedI am trying to get a MacBook to connect to my D-Link wireless router. I can see the network on the Mac and the first time i connected typed the password in and it worked fine. 20min later the connection has been dropped and it won't reconnect.
View 2 Replies View RelatedI've always had problems connecting to the Internet but last night my iMac refused to connect to the Internet. Everyone else in my house can connect to the Router but for some reason I can't - I try going through the network diagnostics for Airport and the first 2 steps turn green, but the rest remain red. It keeps changing from 'No IP Address' to something about a self-adressed IP address. I went into my network utilities and it appears that I don't have an IP address (according to that)? Right now it's just impossible to connect to the Internet.
Info:iMac
I'm running a Belkin N-draft router (F5D8633) as my wireless access point. My iMac is connecting fine to it. I'm just wondering is there any way to know if it's connecting using a 802.11n draft connection or 802.11a/b/g. I know this can be done in windows but I'm new to the world of Mac.
View 2 Replies View Related