MacBook Air :: Running Slow Even On Recovery Mode - OS X Yosemite (10.10)
Dec 7, 2014
My macbook air running slow even on recovery mode when I press Alt + Power it takes me to Mac os Utilities the mouse barely moves, I erased every thing on the hard drive so I can install a fresh copy of mac os but I couldn't because every time I try to boot up from the USB that got the mac os it takes for ever to load the OS for installtion, and some times every thing freeze when I'm on the Mac os Utilities mode.
Info:
MacBook Air, OS X Yosemite (10.10)
View 1 Replies
ADVERTISEMENT
Dec 8, 2014
My Macbook pro is running extremely slow after updating to Yosemite. What can I do to solve this problem?
Info:
MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9.2)
View 6 Replies
View Related
Dec 5, 2014
I'm currently attempting to set up a Macbook Pro using the migration assistant, transferring circa 89GB from a macbook air, and the estimated time is in excessive of 24 hours, i'm using a lighting cable, and both Machines are on Yosemite (10.10.1) the latest version.
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1)
View 2 Replies
View Related
Dec 8, 2014
Mac started to run slow every now and then, updated to yosemite and now getting worse, slow to open programmes like iPhoto (getting jammed when using), websites and switching between the two. Get a coloured wheel often. More worryingly recently when waking from sleep, the left half of my screen is distorted like an old unturned TV!!
Have included the etracheck report for info:
EtreCheck version: 2.1.1 (104)Report generated 8 December 2014 21:37:40 GMT Hardware Information: MacBook Pro (13-inch, Late 2011) (Verified) MacBook Pro - model: MacBookPro8,1 1 2.4 GHz Intel Core i5 CPU: 2-core 4 GB RAM Upgradeable BANK 0/DIMM0 2 GB DDR3 1333 MHz ok BANK 1/DIMM0 2 GB DDR3 1333 MHz ok
[Code] ....
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.1.x)
View 2 Replies
View Related
Nov 30, 2014
I recently had a new hard drive put in my 2007 iMac and have been experiencing some problems. I did a clean install of mavericks, then upgraded to Yosemite and the machine has been very laggy, finder and all programs included. I saw a few posts about FileVault being an issue but I checked and it is turned off.
I should also add that the machine was running fine on Mavericks, slowness only started after the Yosemite upgrade.
Problem description:yosemite running extremely slow EtreCheck version: 2.0.11 (98)Report generated November 30, 2014 at 9:08:54 AM CST Hardware Information: ℹ️ iMac (24-inch Mid 2007) (Verified) iMac - model: iMac7,1 1 2.4
GHz Intel Core 2 Duo CPU: 2-core 3 GB RAM Upgradeable BANK 0/DIMM0 1 GB DDR2 SDRAM 667 MHz ok BANK 1/DIMM1 2 GB DDR2 SDRAM 667 MHz ok Bluetooth: Old -
[Code]....
Info:
iMac
View 11 Replies
View Related
Nov 30, 2014
I have a 27-inch, Mid 2011 running the 2.7 GHz Intel Core i5. I currently have 16 GB 1333 MHz DDR3 in four slots (4 each).
When I uploaded OS X Yosemite 10.10.1 and shortly after uploaded CleanMyMac 2 I started to experience tremendous latency in processing speeds on all applications. Running CleanMyMac 2 multiple times and removing no longer used apps to free up space did little to resolve the issue.
Info:
iMac, Other OS, SLOW OS X Yosemite 10.10.1
View 2 Replies
View Related
Jun 5, 2014
My Mac Pro main boot drive us encrypted. I booted into recovery mode the other day & it wouldn't let me boot back o my main drive. Now upon start up I can't enter either recovery mode nor safe mode nor chose the main drive to boot from. I'm absolutely stymied in what to do.
View 3 Replies
View Related
Jun 17, 2014
I just installed the Samsung EVO SDD in my Macbook Pro (mid-2009). I want to get into Startup Manager or Recovery Mode to restore my data. My main goal is to use my Time Capsule as my recovery disk.
So far I am getting a folder with a question mark everytime I boot into Recovery Mode (Cmd + R) and a white screen with the mouse cursor when I boot into Statup Manager (Option key). My last resort is to re-install my old HD and use a SATA cable.
View 2 Replies
View Related
Aug 27, 2014
I can not access the recovery mode. If I reset my MAC while holding "command-R" it just brings me to the desktop. If I reset holding "option" it will show me the HD but no recovery option. If I access the disk recovery from the desktop, any option to erase HD is greyed out. I have done all system updates and I can't access the internet recovery option either....
I'm planning on selling my Macbook tomorrow!
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
View 1 Replies
View Related
May 11, 2012
But still cannot get past grey start up screen with spinning wheel after software update.
Info:
MacBook Pro, Mac OS X (10.7.4)
View 3 Replies
View Related
Dec 2, 2014
While trying restore the entire HD image to a different hdd in system recovery mode the laptop goes to sleep.
How to prevent it ? the system recovery does not seem to have any terminal app so cannot issue caffeinate command either :/
Info:
MacBook Pro, OS X Mavericks (10.9.5)
View 1 Replies
View Related
Aug 30, 2014
I am trying to reinstall the OS, and got into Internet Recovery mode, and got a list of Wifi networks to select, but my own was not one of them. I even clicked "Other" (or something like that) to enter the SSID and passphrase, but that was rejected. I am now piggy-backing on a nearby wifi, with all the risks that entails. Why won't my Mac see my own Wifi? (Everything else in the house sees "five bars", including my wife's Macbook Air and my iPhone.)
Info:
MacBook Pro, OS X Mavericks (10.9.1)
View 2 Replies
View Related
Aug 24, 2014
I have this MBP 13'' Mac OS X 10.7.5 running a 2.4GHz i5, 4GB RAMs and 500GB storage.The problem started yesterday when I was typing on Word and I copy pasted something from the net (chrome browser) then it froze.I waited for around 5minutes and still frozen with the spinning wheel, then I decided to turn it off by pressing power for 10 seconds restarted my
MBP then now it running so slow on start-up and apps are very slow to open like around 5 minutes. Every action that I try to do like clicking on the apple in the upper left it freezes showing a spinning wheel and it will take time to show the drop down options. I checked disk utility and it said that HD is ok, done verify/permission verify and repair.
I checked the activity monitor noting the ram/CPU usage and its normal it even tells that 2GB of ram is not use.It shows not responding in the activity monitor if you open an app for around 5mins then it opens or it will crash.I already done the 2 kinds of reset and did not work.BUT it opens normally in Safe mode.
Info:
MacBook Pro, Mac OS X (10.7.5)
View 5 Replies
View Related
Apr 27, 2012
With a blank HD, why do I encounter a "Get Help Online Safari" requesting Keychain access in Lion's Recovery mode?
Info:
MacBook Pro (13-inch Late 2011)
View 1 Replies
View Related
Jun 5, 2012
my macbook pro today started to freeze at logo scrren. I tried to start it up in both safe and recovery modes but it doesn't work either. I got the system to start in safe mode only once and the scrren looked like in the attached image.When I tried printing the screen instead of taking a photo with my mobile, the image appeared to be normal (without those noisy rectangles), but it wasnt. Then itried restarting but it's been impossible. As i said i tried booting on safe and recovery modes but the circle below the apple logo appèars and then it freezes again. I read about aproblem with the graphic card similar to mine in earlier models, I don`t know if it is the same problem.
Info:
MacBook Pro (15-inch Late 2008), Mac OS X (10.7.4), 9400M/9600MGT
View 1 Replies
View Related
Apr 28, 2012
I previously had Lion installed and decided to wipe my Mac and re-upgrade to Lion. So, I've both zapped the parameter RAM and erased the hard drive, then done a fairly normal install of Snow Leopard. It successfully goes through this process, using my recovery disc, I get through Apple's initial "out-of-box experience" including setting up a user account, and get to the desktop.
There are no issues to this point, no errors, etc. However, having put in the bundled apps DVD, when I run the installer, I get the error:"There were errors with the installation. The installation failed. An unknown error occurred. The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."I have repeatedly gotten this error. I have both done a simple reformat of my HDD and a "write zeros" option.
Also, I have tried this before and after doing any software updates. I've also used the Apple Hardware Test which says there were no problems. Disk Utility shows S.M.A.R.T. status as verified, hard drive formatting takes a normal amount of time, and there are no other symptoms of any kind.The unit is stock, and there is nothing attached except for the AC adaptor.The only thing I haven't done yet is do the Lion upgrade, but honestly I shouldn't have to do that just to reinstall the bundled apps.
Info:
MacBook Pro, Mac OS X (10.6.6)
View 3 Replies
View Related
Jun 6, 2012
I edit using Lightroom and Photoshop and I'm having an issue while editing. After editing around 8-10 photos in Photoshop the computer starts running unbelievably slow. After each 8-10 photos I have to close down everything and reboot. Even the reboot process is super slow as I have to force quit each application usually 1-2 times to get it to close. Is this normal? I have a 2011 17" with 2.2 GHZ i7 with 8GB ram. Is there any setting that I can change or be aware of.
Info:
MacBookPro, Mac OS X (10.7.2)
View 3 Replies
View Related
Mar 22, 2012
I think it is pretty unsafe to not have a password befor entering the recovery mode.Since one can reset passwords on even admin accounts how come there are no password requiret before entering Recovery mode? It is completly idiotic and totaly unsafe and an easy ways for f.i thiefs to wipe the computer for data.
View 4 Replies
View Related
Apr 3, 2012
i been wanting to re-install Mac Osx Lion for quite a long time now. But everytime i do so, the resolution for the Recovery mode is to big and i cannot select continue to re-install it because it is not on the screen. I have lost my Os, i have nothing else to do. I tried calling apple and they just gave me options for support, which gives no help for me.
Info:
Mac mini, Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 29, 2012
Is there a way to backup to time machine within recovery mode? My machine is really hosed and will not stay up for more then a minute or so before the beach ball of death takes over.
I was going to do a reinstall, but it will not unless I wipe the disk. My existing TM backup is corrupt, so I can't use that after the reinstall.
My (apparent) only option is to backup from within the recovery mode, but it (apparently) only gives the option to restore.
Info:
MacBook Pro, Mac OS X (10.4.11)
View 1 Replies
View Related
Dec 9, 2014
after i ereas all of my HDD and I try to reinstall OS X it show " you have to download maverick.app from the app store " how should I do I have into this computer
Info:
iMac, Mac OS X (10.7.4)
View 1 Replies
View Related
Dec 6, 2014
I have Mavericks installed as the OS on a MBP 2011. I had some hangups with my encrypted harddrive. After using disk utility from an account to verify and repair the disk I was instructed to boot in recovery mode (by pressing command and 'R' after reboot). I've now used disk utility in recovery mode, the hard drive is repaired, but when I restart the computer I get a folder with a "?" on it that flashes. Very different from the password screen popping up within seconds after booting (since it's encrypted).
I also verified and repaired permissions and am wondering if that could have affected the order of things during booting. Since the HD is encrypted I know the password needs to be entered before system can use any of the information on it, including the OS.
I prefer the idea of not useing time capsule since I believe I'd need to repair the HD again. The idea of unencrypting after a backup and then encrypting after repair doesn't sound appealing either.
How do I reboot the system so I can enter the encryption password and allow the system to boot as normal?
Info:
OS X Mavericks (10.9.5), Encrypted HD
View 4 Replies
View Related
Sep 5, 2014
So I recently erased my 2007 iMac through recovery mode. That process went fine. But when I went to go install the latest version of the mac OS (still through recovery mode) it comes back with a window reading basically that process I just did failed. I did this process many times, it doesn't work, and now at the moment I have iMac sitting in recovery mode and I can't do anything on it. Should I bring it into a store?
Info:
iMac, Stuck in recovery mode with no os
View 2 Replies
View Related
Jun 3, 2012
If the internet is already active when i turn on my mac mini it goes into recovery mode though it will not let me click or hit "return" to utilize any of the recovery/utility options.
Info:
Mac mini, Mac OS X (10.7.4)
View 2 Replies
View Related
Sep 8, 2014
I am a mac newbie, but experienced linux and windows user. I am trying to restore my mac mini (mid 2011) running mavericks. The process should normally be very simple; press command-R keys while booting to start recovery mode and go from there.
Unfortunately my keyboard is a palm-sized keyboard without command or windows keys. So I am stuck. I have 2 windows laptops that I can use to remote login but I cannot do remote login during boot.
I tried mapping the Command key to Ctrl key inside OS X, but it seems like this only works after reboot.
I tried to use recovery disk assistant as it requires "Option" key, but the assistant does not allow me select the HD, as I guess I do not have a recovery system on the HD.
I tried doing network install, but it requires the install CD, which I don't have. I have an ipad and two iphones if it
Info:
Mac mini, OS X Mavericks (10.9.4), mid 2011
View 2 Replies
View Related
Aug 20, 2014
i went into recovery mode and tried to repair my hard drive and it says it can't be repaired and I have to restore my computer. is there anyway i can backup my files from recovery mode onto a new disk?
Info:
iMac
View 3 Replies
View Related
Dec 3, 2014
I upgraded from Mavericks to Yosemite and now there is no Recovery partition. I used the Mac app store upgrade method.
I've since downloaded the Yosemite installer and put it on a flash drive. Can I use that to reinstall Yosemite?
View 4 Replies
View Related
Mar 28, 2012
I tried reformatting while running Snow Leopard, but the option was grayed out and the install disc made the computer hang at the white bootup screen. I figured I'd just upgrade to Lion and do a clean install (not an option).
After upgrading to Lion, I booted into recovery to erase the hard drive. I did it and it took less than ten seconds (bad sign).
Now I can't get past recovery and the hard drive is still full.
Info:
Mac mini, Mac OS X (10.7)
View 5 Replies
View Related
Apr 14, 2012
Bought a used 2011 iMac. Wanted to wipe everything clean from previous user and install lion. After installing lion I went into the recovery mode by pressing apple r, then wiped the harddrive clean, and now am trying to reinstall lion over the internet. At first it was working fine, eta was 90 mins. When it got down to 4 mins it suddenly went back up to 90 mins and has been stuck there for 5 hours. The computer is not frozen since I can move the mouse and everything.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Mar 21, 2012
my 4 year old IMac 2.4ghz intel core 2 duo with 2gb running 10.7.3 has been running really slow since I installed photoshop CS4 and upgraded to lion ( I have 137gb of free space on hard drive) I mean it wont quit out of photoshop I always have to do a force quit and most applications run really slow. Do I need a new computer , what should I go for to have a smooth running mac?Was thinking of a new IMac 27-inch: 2.7GHz with 4gb memory.
Info:
iMac (20-inch Mid 2007), Mac OS X (10.7.3)
View 2 Replies
View Related
