I'm currently attempting to set up a Macbook Pro using the migration assistant, transferring circa 89GB from a macbook air, and the estimated time is in excessive of 24 hours, i'm using a lighting cable, and both Machines are on Yosemite (10.10.1) the latest version.
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1)
I just bought a new Mac Mini (Late 2014, ships with Yosemite) to replace a defunct MacBook Pro (Late 2008, last ran 10.8.5). I have a local administrative user account and some server and network data that I want to migrate from the latest Time Machine backup of the MacBook Pro to the Mini. I don't want to copy anything else to the Mini. Neither Setup Assistant nor Migration Assistant will let me deselect anything though. All the check boxes are greyed out. Clicking on them does not uncheck them. This forces me to copy everything from the Time Machine backup to the Mini. Then the Mini won't restart. It won't even boot into safe mode. It just gets stuck in a reboot-loop until I enter recovery mode, wipe the system drive, and reinstall Yosemite.
Info:
Mac mini (Late 2014), OS X Yosemite (10.10.1)
I installed Migration Assistant on my PC and am trying to transfer my itunes to my MBA. My Mac gets to the screen where the validation code can be seen, but the screen on my PC says that it's waiting for my mac to get online, or waiting to find it. I left it for a half an hour and the code never appeared on my PC screen.
Info:
MacBook Air
I tried to migrate an friends mac mini from snow leopard to yosemite via an external drive, also via target mode and lan, without sucess.
It alway shows "there is not enogh space on disc" which is not true. Even if I select the smallest part ...
I did verified all drives via disk utility repaired permissions and used different sources to migrate from. I do have access to the Yosemite Mac via sharing.
Info:
Mac mini, OS X Yosemite (10.10.1)
Macbook Pro (2012) hard drive died. Have full Time Machine backup on external hard drive. Installed new drive in the Macbook, installed Snow Leopard from original CD, and then did the upgrade to Yosemite. Connected the external drive with the TM archive and started Migration Assistant. It sees the TM archive drive and says "choose a volume from the list below" and does not present a list (which I presume would be a list of the TM backup dates). At this point there is no alternative to quitting Migration Assistant.
how to get my data out of the TM archive?
I got a MacBook Air a few months ago and finally got around to migrating data from my MacBook Pro. I am seriously not happy with the results (all I really wanted was to move my iTunes and a limited few apps, and it seems that I got nothing that I wanted). I used a Time Machine backup from an external HD for the migration. Is there any way to undo the migration?
Info:
MacBook Air
My Macbook pro is running extremely slow after updating to Yosemite. What can I do to solve this problem?
Info:
MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9.2)
My macbook air running slow even on recovery mode when I press Alt + Power it takes me to Mac os Utilities the mouse barely moves, I erased every thing on the hard drive so I can install a fresh copy of mac os but I couldn't because every time I try to boot up from the USB that got the mac os it takes for ever to load the OS for installtion, and some times every thing freeze when I'm on the Mac os Utilities mode.
Info:
MacBook Air, OS X Yosemite (10.10)
Mac started to run slow every now and then, updated to yosemite and now getting worse, slow to open programmes like iPhoto (getting jammed when using), websites and switching between the two. Get a coloured wheel often. More worryingly recently when waking from sleep, the left half of my screen is distorted like an old unturned TV!!
Have included the etracheck report for info:
EtreCheck version: 2.1.1 (104)Report generated 8 December 2014 21:37:40 GMT Hardware Information: MacBook Pro (13-inch, Late 2011) (Verified) MacBook Pro - model: MacBookPro8,1 1 2.4 GHz Intel Core i5 CPU: 2-core 4 GB RAM Upgradeable BANK 0/DIMM0 2 GB DDR3 1333 MHz ok BANK 1/DIMM0 2 GB DDR3 1333 MHz ok
[Code] ....
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.1.x)
I set up my new air and now want to transfer my info from my macbook pro and I seem to have missed the boat and want to go back and do it . the computers are in different names with diff. passwords.
Info:
MacBook Air, Mac OS X (10.7.2)
I recently had a new hard drive put in my 2007 iMac and have been experiencing some problems. I did a clean install of mavericks, then upgraded to Yosemite and the machine has been very laggy, finder and all programs included. I saw a few posts about FileVault being an issue but I checked and it is turned off.
I should also add that the machine was running fine on Mavericks, slowness only started after the Yosemite upgrade.
Problem description:yosemite running extremely slow EtreCheck version: 2.0.11 (98)Report generated November 30, 2014 at 9:08:54 AM CST Hardware Information: ℹ️ iMac (24-inch Mid 2007) (Verified) iMac - model: iMac7,1 1 2.4
GHz Intel Core 2 Duo CPU: 2-core 3 GB RAM Upgradeable BANK 0/DIMM0 1 GB DDR2 SDRAM 667 MHz ok BANK 1/DIMM1 2 GB DDR2 SDRAM 667 MHz ok Bluetooth: Old -
[Code]....
Info:
iMac
I have a 27-inch, Mid 2011 running the 2.7 GHz Intel Core i5. I currently have 16 GB 1333 MHz DDR3 in four slots (4 each).
When I uploaded OS X Yosemite 10.10.1 and shortly after uploaded CleanMyMac 2 I started to experience tremendous latency in processing speeds on all applications. Running CleanMyMac 2 multiple times and removing no longer used apps to free up space did little to resolve the issue.
Info:
iMac, Other OS, SLOW OS X Yosemite 10.10.1
Yesterday I did a migration assistant (MacBook Pro to MacPro)to get a music file from a friends computer and what i think happened is that I migrated his WHOLE system because now my hard drive has 4.3 GB left when before it was virtually empty because I use ext. hard drives. My question is WHERE are all these files because I dont see any new files (not even the music file that I intended on migrating) but my hard drive is filled up. And if possible, can I remove all the files at once since they all came at once?
View 2 Replies View RelatedI used Migration Assistant to transfer my data from a MacBook Pro circa 2006 to a new 13" MacBook Pro, but I do not see any of the data that should have come (music, photos, fonts etc.)?
Info:
MacBook Pro, Mac OS X (10.7.3)
I purchased a new Macbook pro( OS Lion) and used migration assistant to migrate my files form (OS Snow Leopard) this worked really well. The only problem is that my office 2011 requires me to key in my product key again. I cant find the disk with the sleeve with the key number on it but the box says it covers two machines at home so I should have no problem. Does any one know how I can find my product key on my snow leopard Mac so I can use office 2011 on my new mac.
Info:
IMac, Mac OS X (10.6.3)
I just used migration assistant to bring my data from my pc laptop to my new macbook air. It brought it over, and deposited it under a new user id. But I can't log in as that user because it says the password expired, and doesn't recognize the password I had on my pc (awful vista). When I try to change the password on system prefs, those usernames are greyed out and can't be changed.
Info:
MacBook Air, Mac OS X (10.7.3)
I own an IMac with two users on it, mine and my partners. She recently got a new Macbook and wants to only transfer her user information using Migration Assistant. Is this possible or will it try and migrate both users over?
Migration assistant freezes up with about 2 mins left, will not reconnect to Mac. I have tried 2 times! I'm in the middle of the Inital setup with my MacBook pro.
Info:
MacBook Pro, Mac OS X (10.7.3)
Running migration assistant via wifi on new Macbook Air with 10.7.4 is not finding other Mac from which I'd like to transfer account.
I have checked wifi netowrks and all seems well.
Would there be settings in System Preferencs>Sharing that I woudl need to change?
How do I use migration assistant to load my new Macbook Air? Can this be done only wirelessly?
Info:
MacBook Air, OS X Mavericks (10.9.3)
I just bought a new MacBook Pro because my other computer pretty much died, in that the screen can no longer be seen. The guy at the store told me it was probably a bad cable running from the computer to the monitor. Anyways, I am trying to get stuff off of my old computer with migration assistant. Right now, I cannot even see if my old computer is logged in, connected to the internet, or anything. In trying to using the network migration assistant, it prompts me to right in a set of numbers to connect with my old computer. How can I do that when I cannot see the screen? Would it work if I bought a cable to connect the two, therefore not requiring me to put in a password or numbers in my old computer?
View 2 Replies View RelatedI'm buying a new 13" MBP in the next couple days, and I'd like to transfer some applications and files from my current MBP but not the entire hard drive contents. I've got a lot of junk on my current laptop and would like to start with a semi-fresh machine. Does Migration Assistant allow you to pick/choose what you want to transfer onto the new machine? Alternatively, could I just drag/drop files from a TM or SuperDuper backup on an external drive (for instance, will MS Office work on the new machine after this process)?
View 1 Replies View RelatedI'm a newbie in mac, I used to have macbook white now I ordered MBPI'm concerned in transferring my data to the new machine can o set the migration assistant to transfer specific documents e.g only mail accounts and iphoto library without other clutters I have on my old machine??
second question is does migration assistant delete the files from my old machine??
I have a new Macbook Air and am trying to complete the Migration Assistant from a Dell XPS PC (laptop). The process will begin just fine, but says it will take 9, then10, even up to 11 hrs., etc. then doesn't wind up working even after those time frames have passed.
I have a very fast internet connection, so I am not sure why this would be happening. Is there a way to use an ethernet cable instead of wifi? I tried connecting the two computers with an ethernet on a whim but my Mac didn't reconginze the PC, and vicea versa.
I'd like to avoid manually bringing over my PC files if at all possible..
Info:
MacBook Air, Mac OS X (10.7.3)
We updated Migration assistant on the macbook... We activated the Migration assistant on the new and old computer..
the new one is a macbook pro...it ran all day, and then said it had completed the migration. But we can't find the files, or nothing really got transfered..
Info:
MacBook PRo, Mac OS X (10.5.8), NA
I tried to migrate information from MacBook Air to ...Pro and it seemed to have taken files from folders on desktop as none exist on Air now. As to where these files are, I don't know. It has also taken my pictures from iPhoto to unknown destination. ??
Info:
MacBook Air, Other OS
Trying to resurrect my old MacBook Pro. Installed a fresh Snow Leopard system on it, then used Migration Assistant to get my stuff off my iMac (running Lion that I purchased from AppStore). First time, migrated from a Time Machine backup. Then, erased and installed again and migrated via Firewire directly from iMac. Problem is, both times, I get to the login/startup screen of the MacBook and it will not accept my password. Using the same password I used on the iMac. My user name and even the custom icon show up properly.
View 1 Replies View RelatedMy boss asked me to transfer all his old email from old macpro to his new one. Do i have to set up his email account on iMal first before i transfer them with migration assistant? Or will that set up autmatically while transfering?
Info:
MacBook Pro
I've just purchased a new MacBook pro, and previously I had a windows PC so I'm new to Mac OS X, so please don't go using super technical vocab I've read through Apple's article explaining how to use the migration assistant, and it says that the mac will create a new user with the migrated data. So, do I need to make a temporary user, use the migration assistant, and then delete the original user I made first? Or could I make a user, use the assistant, and copy the data from the new user made by the assistant to the original one?
View 1 Replies View RelatedMy wife just got a brand new MacBook Air last night.She started to set it up and ran the Migration Assistant from her old first-gen MacBook Air.Wirelessly.Suffice to say she still has 162 hours to go and it didn't improve at all overnight.What are my options for stopping the transfer safely without harming either computer and then getting the new one safely up and running?Can I just "pull the plug" (and how do I do that IBM guy here so Macs are greek to me).Will I need to restore the new machine and can I even do that when it was brand new out of the box?
Her old MacBook Air had some issues with printing, Firefox, etc.Should I do a more select file transfer from old to new to avoid transferring corrupted files?Not sure how "deep" the migration assistant goes.
Info:
MacBook Air
