MacBook Air :: Dvd Will Not Change Region Codes?
Jun 1, 2012when i insert the dvd it comes up with a notice saying that the region code is wrong and that i have to eject the dvd what do i do?
Info:
MacBook Air, Mac OS X (10.7.3)
ADVERTISEMENT
Applications :: Apple DVD Player Region Codes?
Apr 22, 2009NB: First mac...When I first put a DVD into my mac (DVD and mac both from Australia) I was asked to set my region code - fair enough. Then, I inserted another dvd, from Australia again. I had to reset my region code. I was alarmed to find that I could only set my region code 5 times...I know of alternatives such as VLC that ignore region coding, but none of these offer the tight integration that Apple's DVD player does.A quick google search also revealed the possibilities of installing a region-free drive, and using a utility called RegionX, which resets OSX's region change counter (only with region-free drives...). Unfortunately, I don't have the luxury of extra optical drive bays, as with the Mac Pro...
View 5 Replies View RelatedMacBook Pro :: Change The DCD Region More Than 5?
Apr 3, 2012on a macbook pro, you can only change the DCD region 5 times. I accidentally changed it 5 times and now it's stuck on the european region, which means that i can't watch american dvds. Â can I re-set my dcd region or do I have to go to the store? Â Â i was living abroad and that is why i had to switch so many times.
Info:
MacBook Pro (13-inch Late 2011), iOS 5.0.1
MacBook Pro :: Change My DVD Region One More Time?
Apr 12, 2012When I first got my macbook I changed the region the 5 times you are allowed without realising that there was a limit.I had recently got a region 1 DVD and wanted to play it so I kept changing the region to region 1 and it eventually stuck on that. This is a problem because 99% of my DVDs are actually region 2 so I can't watch any of them. I didn't know there was a limit to changing it or I wouldn't have changed and now I feel pretty desperate because it was just a mistake and now I can't watch any of my DVDs on it.
Info:MacBook Pro (13-inch Mid 2010)
MacBook :: No DVD Region Change Dialog - DVD Not Mounting
May 24, 2009I had until now only used my macbook with "local" DVD from Region 2. I have a few weeks ago watched one single DVD from region 1, and had therefore to accept the region change in the pop-up dialog. I did accept knowing I would reverse to region 2 after.
I have not read an DVD until today, hen I am trying to load again a region 2 DVD.
Problem: DVd player or Handbrake do not see the DVD, (but VLC can), and I see no dialog offering me to change the region code.
1) where can I see what is my current setting?
2) how can I get DVD player Mac OS X to present that dialog, so that I can reverse to region 2?
MacBook Pro :: How To Change Drive Code Region
Jun 3, 2014I did change 5 times the drive code region  It that a way that could read again the DVD here ?Â
Info:
MacBook Pro, Mac OS X (10.5.8)
MacBook :: Disc Region Does Not Match Drive Region - How To Know About It
Mar 28, 2009I have alum macbook trying to play family guy DVD and get this message.
the disc region does not match the drive region.
the drive region must be changed to play this disc.
Hardware :: Trying To Watch A Region 2 DVD On Region 1 Macbook?
Jun 4, 2009I've researched and googled and finally downloaded VLC. I can't get it to work. It will paly the title screen of the movie and then shuts down.
I read another thread here from a person who said they newer macbooks won't let VLC run. I bought mine last SEptember.
PowerPC :: Change On DVD Region Code Settings
Apr 26, 2008I'm down to one last change on the DVD region code setting. It boggles me why Apple would do this. I've tried using VLC and it does not work. Not sure if I'm doing it right, there is a brief window that pops up and then closes immediately. There is time indicated and it looks as though the movie would play, however the the window closes right afterwards. I also have DVD Player still opened because if I were to click cancel, the DVD just pops out. Are there any other alternatives I can try or am I doomed to this one setting? I don't have the time, nor want to go through the hassle of completely wiping out the hard drive and OS again.
View 2 Replies View RelatedApp Store :: Change Region To Use Credit Card From Another Country?
Apr 19, 2012I have a credit card from Turkey, but I currently live in Canada. When I try to use my credit card on App store, I can not choose Canada as my region, since the credit card is issued in Turkey.
View 1 Replies View RelatedMacBook Pro :: Unable To Know Product Codes?
Nov 13, 2010Does anyone know the product code for the mid2010 15" 2.53 i5 MBP
is it: MC372LL/A
MacBook Pro :: How To View Html Codes
Apr 7, 2012I know my coding is perfect, I used to work on the pc with it. Now moving to a Mac... I'm having such difficulty its starting to frustrate me. I've googled ways to solve it and they all say change the rich text and so on so forth. I've done that yet no change has occured for me. When I bought this, I asked if I could do my codes on it and the guy said yes, that I could do it straight from my textedit.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
MacBook Pro :: Words On It Changed To Numbers/codes?
Mar 8, 2012When I am using programs like 'Finder' and I'm trying to select different options, for some reason the words such as, 'Arrange by', 'Date created' etc have all changed to number and letter codes, I don't know how I've done this or how to change it back. They all still work if you select them, I just can't read what I'm selecting.
Info:
MacBook Pro, Mac OS X (10.6.8)
MacBook Pro :: Three Beeps But Also Error Codes - OS X Mavericks (10.9.3)
Jun 5, 2014I have a Mid 2010 15" Macbook Pro, core i7 processor, 1.5TB HD, and 8GB of RamÂ
In November it started having problems with a gray screen with folder and question mark. I defragged and re-optimized the volumes of the hard drive and everything was fine. I have tried reinstalling both ram chips twice. It worked fine for a few weeks and then I started getting beeps and error codes. I can startup fine but after using for a minute or two the screen freezes and three beeps start. Othertimes a panic code will come up too.Â
I've attached the panic codes in images.
Error Code – panic cpu 2 caller 0xffffff000b2dca29 Â
***Are the Ram chips bad? Or is there an issue with the Logic Board
Info:
MacBook Pro, OS X Mavericks (10.9.3)
MacBook Pro :: Apps Crashing - Exception Type And Codes
Aug 12, 2010Alright I just picked up a new Macbook Pro from school today, and all my apps keep crashing, Safari, Chrome, System Preferences, you name it..... I've done a bit of search on the two codes I'm seeing and guess it might be the NuRam (8gb) I just put into it. Just wondering if there is anyway I can test the ram before I call them up? Just as a heads up these are the codes I'm seeing:
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS
MacBook :: DVD Region Is Locked
Mar 26, 2012My DVD Region is locked to Region 2 and now I can't watch films from Region 1!I've tried VLC and that doesn't work.
Info:MacBook, Mac OS X (10.6.8)
MacBook :: Want To Go Back To Region Code 2?
Apr 1, 2010I have a problem playing DVDs on my 2007 MacBook. I recently watched a DVD in region code 1, and now I want to go back to region code 2. I have done this a couple of times, but I still have one chance left (or so DVD Player tells me). Yet when I try to change back, I get an error reading Error: - 70001. Can anyone help? It says I still have one try left???
View 1 Replies View RelatedMacBook Pro :: Changing Region Format On DVD?
Jul 14, 2010I have a DVD with an Indian region format (nothing illegal, it's from a wedding). Is there a way to change that to play on a US region DVD player?
View 7 Replies View RelatedMacBook Pro :: Matsushita UJ-857 RPC-1 (Region-Free) Update Available
Aug 29, 2007The notorious Matsushita UJ-857(D) firmware has at last been cracked, thanks to ben11 from rpc1.org. He has released region-free updates for the HAEA, HBEA, KBVB, and KCVB revisions.
Before I provide the download links, here's the obligatory disclaimer:
WARNING: DO NOT DOWNLOAD IF YOU ARE UNCONFIDENT ABOUT THE FLASHING PROCESS. IF ANYTHING GOES WRONG YOU ARE LIABLE FOR DRIVE REPAIR. THE FOLLOWING IS PROVIDED "AS IS" AND IS NOT WARRANTED. FLASHING YOUR DRIVE IS IN VIOLATION OF APPLECARE TERMS
Now, take these steps before you do anything:
1. Check that you have a UJ-857 or UJ-857D drive with revisions HAEA, HBEA, KBVB, or KCVB. This can be done by going to the Apple Menu>About This Mac>More Info. This will open up System Profiler. Click on ATA and the Model number and Revision number will be listed. If it looks OK proceed to step 3.
2. If you have a UJ-857(D) drive but the revision number is NOT one of the four listed (HAEA, HBEA, KBVB, or KCVB), then you have not applied the Superdrive Update 2.1 which Apple released in June. You will need to apply this update BEFORE PROCEEDING. This update is no longer available from Apple so you can download it here. Once you have done so, proceed to step 3.
3. Download DVDInfoX to check whether you have a region set. YOU MUST HAVE PLAYED A DVD IN THIS DRIVE AND SET A REGION IN ORDER TO PROCEED. A correctly set drive will produce something along the lines of this using DVDInfoX:
Quote:
Vendor: MATSHITA
Model: DVD-R UJ-857D
Firmware: KBVB
RPC-2 (region locked)
State is SET
4 vendor resets left
3 region changes left
Region 2
If "State" is "SET", you are ready to flash your drive.
4. Download the correct RPC-1 (Region-Free) update.
UJ-857 Revision HAEA
UJ-857 Revision HBEA
UJ-857D Revision KBVB
UJ-857D Revision KCVB.
5. Read the included README and then proceed to opening the "Update to region free" application. The process will start immediately. DO NOT INTERRUPT THE FLASHING IN ANY WAY - it will result in a broken drive. Also, there are only a certain number of times the drive can be flashed so be very very careful. I suggest you restart the computer and shut down any other application that is running before you run the update - just to be safe.
One note: the flashing will probably hang at 60%, and then again at 90%. This is normal. Just be patient and let it finish. Do not panic and do anything stupid.
6. If everything goes well, the flashing will finish and it will ask you to restart. Once you have done that, you can open DVDInfoX and check that the drive has been flashed. A correctly flashed drive will show something along these lines:
Quote:
Vendor: MATSHITA
Model: DVD-R UJ-857
Firmware: HBEA
RPC-1 (region free)
7. That's it. Make sure to download Region X to change the region of the drive before you play DVDs. The drive is region-free, but you must still change the region manually to play DVDs from different regions.
MacBook Pro :: Play A Dvd Region Code 2 With Apple's DVD Player?
Apr 21, 2012Can I play a dvd region code 2 with Apple's DVD player?
I want to buy a movie but it only comes in a region 2 code (Europe) format.
Info:
MacBook Pro, Mac OS X (10.7)
OS X :: How To Do Windows Alt Codes On Mac
Apr 3, 2009So I want to do some windows alt codes, but when I do the code holding option(alt) it doesn't come out like windows.
View 3 Replies View RelatedOS X :: Showing Codes On Internet Explorer?
Apr 16, 2009i made a site in iweb 08 [URL] and i inserted an html snippet for some javascript. when viewed on internet explorer, the pages that have the snippet don't load properly and the code shows at the top of the page. how do i get rid of this? also, the links are a different font than the font i originally used and the colors are completely different from one browser to another. is there anyway to fix this?i want to say that i am a bit inexperienced with web. i have a little dream weaver experience and this site, while easy, was pretty ambitious for me. i may have put the javascript incorrectly but i'm not sure.
View 8 Replies View RelatedQuickTime :: Locate It / Library Folder On A Mac To Add Codes To This?
Feb 14, 2012How do you locate the quicktime/library folder to add codes to quicktime? What ia an Ac3 converter for quicktime for mac?
Info:iMac (27-inch Mid 2011), Mac OS X (10.7.3)
Intel Mac :: Black Screen With Codes When Turned On
Apr 10, 2012When I turn it on it comes up with the white screen and then the apple logo shows and then the loading symbol comes. The screen then goes blue for about 30 seconds and then the screen goes black. Code starts to come up...Here's some detail on my IMac: 17" 1.83Ghz
Info:
iMac
ITunes :: Getting Error Codes -50, 1008 And 5002?
Apr 18, 2012So I just recently purchased a Mac mini and I started putting my music all into the computer. I logged into my Apple ID and it works fine, but every time I try to update my apps, I get an error code 5002. I thought to myself, "well, this is a Mac, so I know its not a firewall blocking the internet or anything in particular". So I went ahead and tried updating my iTunes Match account while I Googled for the error code 5002. When I updated iTunes Match, it looked as if it was gathering information when all of a sudden, it stops and gives me an error code -50. It said "Genius results can't be updated right now. An unknown error occured (-50). So then I immediately started to worry. I plugged in my iPhone 4S (for the first time) and decided that once in sync mode, it will just update my apps so I don't have to worry about downloading it on my Mac. Well, that is when I received an error code 1008. It wanted me to authotize my computer and when entered my credentials, it said it couldn't authorize it and when I cancelled the process, it gave me the error code 1008. So... I am stuck in a rut since I've spent almost an entire week trying to figure this out with no solution. I have tried signing out and signing back in and nothing. I also restarted my wireless router and no luck. I can't afford to create a new account since I've always had the same Apple ID and I have a BUNCH of media that I have purchased through iTunes, so creating a new Apple ID is out of the question. I can't sync my iPhone, I can't update iTunes Match, and I can't update my apps. I am currently using the 800 dollar Mac Mini.
Info:
Mac mini, Mac OS X (10.7.3)
Hardware :: Software That Allow To Find Key Codes Of Keys That Are Not Normally On Keyboard?
Oct 10, 2010Is there a piece of software out there that can allow me to find out the key codes of keys that aren't normally on a keyboard. Or a way to figure them out?Or even better, would be a piece of software that allows me to use my multimedia keys on my macbook. The link below is the keyboard and the buttons I am talking about are the six small, circular ones to the right at the top of the keyboard.
View 1 Replies View RelatedWindows On Mac :: Internet Explorer 9 To Convert Codes For Macs
Aug 20, 2010How do i change my internet explorer 9 convert the codes so that the Mac's can be able to use ie 9? And here is the link to it [URL]
View 4 Replies View RelatedOS X V10.6 Snow Leopard :: Finder Is Displaying Different Codes Such As N80 And N201
Mar 2, 2012I think I may have this Java Trojan virus that many have been talking about, in which the most common attribute of it is that it makes my Finder display folder names as N80, N81, etc.... in replacement of titles such as 'Open Finder' and 'Empty Trash'?I have tried a few things, such as Repair Disk Permissions, restarting, and logging off, but to no success.Â
Info:
MacBook, Mac OS X (10.6.6)
OS X :: Update Options To Snowleopard And Key Codes To Prior Owned Programs
Feb 21, 2010to two blue screens.. I was told to Re install.. "archive and install" to be specific .. Snow leopard.. In a tragic fire i lost alot of things.. one of which was my key code to abletonlive.. If i archive and install snow leopard again to fix my boot up problem.. Will it ask me for a keycode for abletonlive?.. Or will all my applications run as they did prior to having my boot up problem, after archive and install is ran with snowleopard again
View 4 Replies View RelatedSoftware :: Hardware Test Error Codes - Extended Result
Nov 12, 2008Today I ran AHT version 3A134 on my MacBook Pro Penryn 2.5GHz (early 2008) it came out with error codes:
4MOT/1/40000002: Right side-2893 on 1st extended test result,
4MOT/1/40000002: Right side-3017 on 2nd extended test.
When I initially ran the short test no error code was resulted from the test, only by the extended tests the errors occurred. I have my machine's limited warranty until June 2009. Could you please tell me what are the error codes refer to?
