Mac Mini :: Poor Performance In XP On New Mini?
Mar 28, 2009
I'm having what I'd consider poor performance on the new 2ghz Mini in XP.I get non-responsiveness when moving large files across the network and it just is slow overall.Its slower than my previous 1.8ghz Mini.
The standard MS drivers for the SATA controller are installed even though I ran the Bootcamp install, does anyone else show the Nvidia SATA controller driver installed? That is usually the biggest cause on non-Intel chipsets, the default MS driver for the SATA controller...I was just going to install Forceware and see what happens but wondered what other people show in Device Manager.I get a lack of response from Remote Desktop, and after several hours of high network traffic it just stops responding to the network period.OSx I'm not sure about because I rarely use it but I did boot it up to do some surfing in Safari and found its response time to be slow.
View 9 Replies
ADVERTISEMENT
May 23, 2012
i bought an ssd for my laptop knowing that is not going to use the sata3 because this model is only sata2 capable but the you check in system information and says that: Velocidad de enlace: 3 gigabitsVelocidad de enlace negociada:1,5 gigabits There is any possibility to use the sata2 speed in this laptop, because the ssd is going faster than the traditional hdd 5400rpm but not as fast as other ssd in sata2. with TRIM active the maximum performance is 130 read and 90 write while with the hdd was 70 read and 70 write. Versión de la ROM de arranque: MBP71.0039.B0EVersión SMC (sistema):1.62f6 Tried with a bootcamp and windows 7 64 bit and the same performance.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.4), ssd sata 3 240gb sandforce
View 4 Replies
View Related
Apr 3, 2012
How do get an image on a Samsung HD TV via HDMI adapter and cable?Currently get a static image of the desktop and then a grainy gray picture.
Info:
MacBook Air, Mac OS X (10.7.3)
View 2 Replies
View Related
Aug 15, 2009
I have a MacBook (late 2007) and I've noticed that my internet crawls when I'm using the laptops battery power. I can be downloading a file at 200 kB/s under A/C power, and as soon as it goes on to the battery it'll drop to 10 kB/s. I'm assuming some kind of power saving is being activated, but this has only happened recently. Around the same time this started happening, I updated my computer to 10.5.8 and I also turned in my computer to the Apple store to have the palm rests replaced for having cracked under the weight of the lcd. Would this problem be caused by either the update or the repair, and if not, what could be causing it?
View 1 Replies
View Related
Jun 3, 2010
I have a broken fan in my 2008 MBP. The broken fan is on the side where my right hand is so im assuming thats thr right fan on the MBP. It still spins a bit but is insanely loud but my MBP performance has dropped considerably lately and im wondering if there is any correlation between the two. The main issue is video.
Videos that used to stream fine low lag and are choppy and working in Final Cut and After Effects has become quite the slow and verrrrrry choppy process. All things were working out smoothly until recently. I am getting the fan replaced next week and hope it remedies these problems. If anyone has any experience with this I would love to hear it!
View 6 Replies
View Related
Oct 23, 2008
Just picked up a new Intel core 2 1.83 mini. Will I see a noticeable improvement by upgrading RAM with 2x2gb matched sticks and a 320g/7200rpm drive? How easy is it to reinstall the OS on a new drive? Can I use Time Machine to back it up on an external drive and reinstall?
View 1 Replies
View Related
Jun 3, 2009
Should I go for a 2.26GHz + 4GB ram mac mini for photoshop, illustration works, some video editing and my 3d studio Max the most. Does 2.0 & 2.26Ghz really tell the different when I am doing the rendering on my 3d max?
View 24 Replies
View Related
Aug 16, 2010
I was thinking of upgrading but I am not sure it is worth the money for the difference of what I have and what I will gain out of the new OSX? Is there much of a difference that I would gain on performance with a Mini 2009 2 Ghz 4 GB Ram OSX Leopard 500 GB WD Blue 5400 RPM.
View 2 Replies
View Related
Jul 12, 2009
I recently upgraded my 1st Gen MBP 2.14Ghz and my legs no longer get cooked while doing basic task. This is a great improvement.My new laptop is the 2.53Ghz w/ 4GB and 9400M Nvidia GPU w/ 256MB shared memory. upgraded w/ EFI 1.7
Aside from the upcoming Snow Leopard, the main reason I upgraded was because I watch alot of online video. Netflix, Hulu, etc...I have read that the new GPU does alot of the decoding which keeps the CPU in single digits.I noticed something was sluggish the first time I started watching videos. Netflix had a vertical sync issue that I never experienced w/ my old MBP.Then today I was watching Hulu and I saw the processing or CPU jump to 112% and the base of my laptop was very hot.
Like I said I purchased the new MBP hoping to avoid cooking the family jewels. Anyone know what's going on and what I can do to stop this?
View 2 Replies
View Related
Dec 30, 2008
I am looking to get a mac mini. If I was to get the Core 2 Duo 2.0GHz with 2Gbs of RAM how would it perform with Parallels Desktop? share any thoughts or experiences with your own macs. Main thing, will it run smoothly?
View 3 Replies
View Related
Mar 15, 2009
Is it a reasonably smooth and fast experience?
View 2 Replies
View Related
Apr 4, 2009
I've noticed something rather subtle at first. My new mac mini just did not give me any faster feel comparing to old one, as matter of fact my old mini seamed faster and smoother. After comparing minimize/maximize animations while holding shift on old and new system system by side, I have noticed that new one gives off as having 2 times slower frame rate or slight flickering when doing minimize, maximize and magnify effects on dock. Also gave some shabby feel comparing to old one.
After I have run XBench of both systems and 2 restarts, it came as consistent result that new system scored 125+/-4 vs old one 280 on OpenGL test, more than 2 times slower! I expected upgrade to be upgrade, not downgrade! What could be issue, it is supposed to be 5 times faster. Is it not tuned up or quite not ready drivers. Will this issue be fixed by apple anytime soon? I love apple but I feel disappointed that my old system gives smother user experience than my new one.
View 10 Replies
View Related
Apr 21, 2009
After reading some of the threads here with people being very happy with their minis, I decided to head down to the Apple store and give it a go. I used each of the computers (a Mac mini, Mac Pro, and iMac) for about 10 minutes (which seems like forever when you are in a crowded retail store) doing things I would normally be doing at home. The iMac was fine, as expected. It handled just about everything with satisfactory speed, even thought it was the base 24" model with no fancy processors or graphics.
Video
The Mac Mini though was quite disappointing. To render a 1 minute video in iMovie it took around 4 minutes. The Mac Pro did the job on the same exact movie (sample file found on every display computer) in about 45 seconds. Another big difference was apparent, while the movies were rendering, the Mac Pro was completely responsive and I was able to load iPhoto, Pages, Numbers, Safari, and iTunes. Each opened up within seconds, and each interface was running smoothly as if nothing was happening in the background (granted for a short period as the movie finished rendering quickly).............
View 24 Replies
View Related
Sep 12, 2010
I have an Early 2009 Mac Mini with Mini DVI and Mini DisplayPort. And I have two 1080p HDTVs. The Mac Mini is capable of dual display, and I've gotten it to work before, so the issue is not the TV or Mac. And I have tried both Mirroring and No Mirroring.
I got a Mini DisplayPort to HDMI Adapter (#5311) and a Mini-DVI to HDMI Adapter (#4852) both from MonoPrice. And for some reason I can't get the Mac Mini to dual display, it's only one or the other.
Before I had a Mini Displayport Male and USB Male AUDIO to HDMI Female Converting Adapter (#5969) and I got video on both HDTVs, but not audio at the same time b/c one was USB and one was TOSLINK.
I'm not sure why I can't get video on both monitors. Any help?
View 2 Replies
View Related
Apr 6, 2009
I need to connect my 09' Mac Mini to my Yamaha RX-V2700 receiver which outputs to my Sony XBR HDTV. I know the mini has both mini-dvi to dvi and mini-dp to dvi or hdmi available via adapters. I was thinking to go with option 1 however I was wondering what is your opinions? Is mini-display port better over mini-dvi or are they the same? Audio will be carried over optical toslink.
Option 1:
Using mini-dvi adapter to dvi: Connect Dvi-Hdmi cable to receiver and output audio with toslink adapter.
Option 2:
Using mini-dp adapter to dvi or hdmi: Connect Dvi-Hdmi cable to receiver and output audio with toslink adapter.
View 6 Replies
View Related
Feb 14, 2010
I am using an Apogee Duet with a late 09 Mac Mini, and have suffered through crappy graphics/general performance for some time. I really kinda shrugged this off until getting quite tired of it and did some searching around. After looking around I have discovered that I am not the only one who experiences this problem, and it has been pegged to core audio drivers. Which is odd.Disabling core audio through plists does indeed alleviate the issue it seems. Unplugging the Duet also alleviates this issue. When it is plugged in I see higher temperatures, slower overall performance and very choppy graphics performance, especially in expose and spaces. However this also affects the standard graphics in OSX.
View 3 Replies
View Related
Aug 11, 2010
First I wanted to upgrade my new mac mini with a Momentus XT but now I'm thinking about getting a "real" ssd + a FW800 drive for storage to have the huge speed boost of the ssd drive. Does anybody have this combination in his mini? What I want to know: How is the performance like of the external drive connected to FW800? Is it comparable to a standard internal hard drive?
View 11 Replies
View Related
Jan 24, 2010
I just got a brand new Mac Mini 2,26 Ghz Core 2 Duo, 2 gig RAM, and it's hooked up to my tv with a mini-DVI adapter. Snow Leopard installed. I noticed right away that the screen looks really sluggish, with screen tearing and laggy video performance. Playing videos in Plex for instance there is a lot of screen tear and I had to set the display to 720p to get it decent, and even then it's rough, even on SD videos! So I ran Xbench, and got a remarkable slow score on OpenGL; 43. My MacBook Pro running with the 9400M card got 97.
View 11 Replies
View Related
Jul 4, 2010
I need some advice on whether a hardware update will actually improve my video performance or not. Currently I am using a mac mini snow leopard server 2009 model hooked via mini display port to hdmi adapter to my lg 37 LED LCD TV. The mac mini has a intel x25 m 80 gb bootdrive.
2 external fw 800 drives used as video storage. Mostly I use boxee eyetv sat all controlled via appleremote - sofacontrol.
Altogether a great setup. With big mkv files in full hd the picture sometimes is choppy. Would a upgrade to the new 2010 mac mini server with direct hdmi port and 320M graphics actually improve the video quality - graphics performance? or should I stick to my current setup? (I bought the current server cheap from the uk)
View 2 Replies
View Related
Mar 2, 2009
Just curious can use both to drive the 24" LED ACD AND another 2nd monitor via mini dvi?? That would be a dream come true!
View 13 Replies
View Related
Feb 27, 2012
Apple Macbook Air late 2010, has been giving me poor battery performance even after replacing the battery under warranty. I am unable to find a solution, even the local apple service provider seems confused. Should I go for a replacement?My Macbook Air runs on the OSX 10.7.3 with all updates as on date. I use only softwares such as Microsoft Office for mac, Safari, Mail, iChat, iTunes regularly.
Info:
MacBook Air, Mac OS X (10.7.3)
View 2 Replies
View Related
Jun 23, 2010
The old Mini worked fine with my Westinghouse 24" LCD monitor (HDMI input -connected to Mini via DVI->HDMI cable).The new Mini Server 2010 has HDMI out, so I used a straight-through HDMI cable. The display looks terrible! All of the fonts appear to have a 'shadow' next to them - almost like an old analog VGA with 'interference'.Thinking it could be the cable, I went back to my old Mini's DVI->HDMI cable (and used the new Mini's HDMI->DVI adapter to connect to it). Same results.The Westinghouse monitor's native resolution is 1920x1200. The Mac says that it's configured for 1920x1200.
View 14 Replies
View Related
Jul 1, 2010
I do have a copy of the the Mac Mini SL Client software but I don't have another Mac to create the USB restore disc in order to load the client on the Mini Server via usb drive. I don't intend to use the Server Software and don't want to 'activate' the license so I can resell it instead. Can I just use the Server to create the bootable restore disc without 'activating' the Server License and locking it to my serial number? Or is there another way to create the restore disc if you don't have access to another Mac to run disc utility?
View 6 Replies
View Related
Feb 6, 2012
Have a new Mac Mini, using an external drive but I can't get it to show up in finder. It's a Lacie 1TB Porsche design HDD, using a USB connection directly into the mini. I tried it at first by connecting to an open usb on my cinema display..no good. Also no good when connected directly into the mini.
Info:
Mac mini, Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 15, 2012
My old Mini is in the next room to the wireless DSL modem. It gets one to three max bars, usually two, and it's just through one interior wall. I don't want to spend a bunch of money, I just want to get a little better reception in the next room. I have seen USB wifi antennas advertised. Would that do anything for me? My iBook G4 in the same spot gets full reception no problem.
View 5 Replies
View Related
Apr 15, 2009
I have just read a ton of forum posts and want to make sure I am going to buy the right accessories to make my new Mac Mini all it needs to be to run my home theater.1. For 5.1 audio, do I need to buy this product and then just use a standard Optical audio cable to plug into my receiver?2. The new Mac Mini comes with a mini DVI to DVI connector correct? So all I will have to buy is a DVI to HDMI cable?3. Is OWC (other world computing) the best place to buy upgrades for the mac mini? I have looked at the videos on youtube and it seems like something I should be able to do no problem.
View 10 Replies
View Related
May 25, 2012
Is there an adapter that connects a mini DVI to a mini Display port so I can use one computer as an external monitor?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.6.8)
View 1 Replies
View Related
Sep 21, 2010
I don't have one...but want to know is the mac mini has an ethernet connection to hook to my wired rotter?
View 1 Replies
View Related
Jan 9, 2011
One of the drives in our 2009 mac mini server 2009 has died. I have taken apart many minis so have no problem taking it apart to replace, but does anyone know which drive is the primary, "Server HD" drive? Would it be the top drive (first drive you come across during disassembly) or the bottom drive closer to the logic board with the two pads stuck on? Just wondering if anyone knows for sure so I can avoid removing the drive that's still working fine.
Also, to keep the server running in the mean time, I am booting to the second drive which is working fine. Just curious, once the dead primary drive is replaced , can I simply use carbon copy clone to copy back from the 2nd drive, or will I need to install snow leopard server back onto the new drive?
View 4 Replies
View Related
Jan 8, 2008
I have a Mini Media center that I installed Front Row onto. When I updated to 10.4.11 I found that Front Row was broken and I finally figured out how to get it going again. I'm posting this simply for the spreading of knowledge. What you'll need:
Enabler [URL]
Front Row 1.3.0 [URL]
Front Row 1.3.1 [URL]
Pacifist [URL]
Installing: Put Front Row 1.3 package on desktop. (don't open) Open Enabler and Install Front Row. Enable Front Row (if you get an error you probably already have it enabled). <Restart> Use Pacifist to open FrontRow 1.3.1 package. Find Front Row App (System>Library>Core Services) Install the app and Replace when prompted.
View 4 Replies
View Related
