Mac Mini :: Collapsible LCD Monitor - Less Than 2" When Closed
Nov 26, 2009I'd really like to find a collapsing LCD monitor for my Mac Mini. I need it to be less than 2' thick when closed. Any recommendations?
View 1 RepliesI'd really like to find a collapsing LCD monitor for my Mac Mini. I need it to be less than 2' thick when closed. Any recommendations?
View 1 Repliesi would like to know is it possible to have my MBP lid closed and use two additional monitors as my main?
will there be any heat issue on the MBP ( keep in mind i will be using it for many hours design/code )
I want to run my g4 17 inch powerbook connected to an external screen with the lid closed, when i shut it the external screen goes off aswell, I have been told to use an external keyboard etc, I want to use a bluetooth keyboard and mouse. Is there anyway of doing this?
View 12 Replies View Relatedhowever i hear that having your macbook closed is bad for it? i have the white 2.1ghz one (early 2008?) i'd like to close it and stuff to save space or what not.
how can i turn on the macbook without openening it if its safe to keep it closed while running off my external montor?
I use a macbook 13in and run lion. Last night, I checked out the activity monitor and there were programs/files(?) I didn't recognize. I understand that some of these are important and quitting them may cause problems. How do I know what programs I can quit?
Info:
MacBook, Mac OS X (10.7.3)
Is it not possible to use a monitor with the lid closed, and without the power cable?
Info:MacBookPro, Mac OS X (10.7.3)
I've been creating outlines in Pages and it would be easy to be able to hide some of the information when i dont need to see it.. is there any app that allows me to hide some parts of the outline?
View 3 Replies View RelatedI have a 17" PowerBook G4. I am looking at getting an external desplay. Does anyone know if I can use the display with my powerbook closed? Or do I have to keep my laptop open?
View 3 Replies View RelatedI typed Mac Help about "to operate the portable computer with an external monitor attached and the display closed. When I close the display of my Mac Book or MacBookPro, the external monitor such as my 50" Plasma monitor or video projector would go black. I read the Help and it said and required the USB Mouse and Keyboard to close the Macbook display and put computer sleep. My question is will the Apple blue tooth or wireless keyboard and mice will work with out using the USB? Has any one try that? I am not sure if I should buy wired or wireless to operate this.
View 10 Replies View RelatedProblems with Monitor only working when tilted to almost closed position.
View 2 Replies View RelatedI would like to run a Macbook Pro Retina (2014) with the lid closed and all video and audio via HDMI routed to an external monitor (Samsung Syncmaster from 2010). Is this possible? When I try this, no sound is transferred to the external monitor and I cannot operate the Macbook Pro with the lid closed. As soon as I close the lid, it cuts the signal to the external screen. I’ve tried looking for previous posts but they’re about MCP’s connecting via Thunderbolt or DVI.
Info:
MacBook Pro (Retina, 13-inch, Mid 2014), OS X Mavericks (10.9.4), 16Gb, 256Gb SSD
I am currently am using a MacBook Pro mid 2007 and was wondering it is possible to connect it to an external monitor and if so use it when closed without the comp going into sleep mode.
Info:
MacBook Pro
If you connect say a 13inch macbook to a 19inch monitor using the closed clamshell mode, will the picture quality on the monitor be like a stretched out version of the 13inch screen? I.e. poor, or does the macbook just act like a desktop computer and allow high quality viewing.
View 1 Replies View RelatedI have a fresh install of Windows XP, service pack 2 on a boot camp partition on my macbook (13" first gen aluminum case) and a Apple LED Cinema Display attached to the mini display port.
I can't seem to make the Cinema Display the primary display (the "Use this device as the primary monitor" checkbox is always greyed out in the Display Property Settings tab). I also can't shut the macbook lid and continue to use it closed (with kb, mouse and monitor attached) like I would when booting OSX.
Is there some other way to make the Cinema Display the primary monitor, so I can leave the macbook closed when booting into Windows?
When anyone or even myself locally tries to ssh into my mac-mini, it says connection closed by and then the local IP of my mini. Remote login is turned on and it used to work, but its a work computer so I don't remember exactly at what point ssh started not to work.I did a ssh -vvv localhost and here's what I got...
OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to localhost [::1] port 22.
debug1: Connection established.
debug1: identity file /Users/Support/.ssh/identity type -1
debug1: identity file /Users/Support/.ssh/id_rsa type -1
debug1: identity file /Users/Support/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1
debug1: match: OpenSSH_5.1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.1
debug2: fd 3 setting O_NONBLOCK
debug1: An invalid name was supplied
Configuration file does not specify default realm
debug1: An invalid name was supplied
Configuration file does not specify default realm
debug1: SSH2_MSG_KEXINIT sent
Connection closed by ::1
I'm running OS X 10.4.
I am using Macbook Air OS X Mavericks, connected to HDMI TV via thunderbolt, how do I close my MBA lid and still continue using with the TV display?
View 4 Replies View RelatedThe old Mini worked fine with my Westinghouse 24" LCD monitor (HDMI input -connected to Mini via DVI->HDMI cable).The new Mini Server 2010 has HDMI out, so I used a straight-through HDMI cable. The display looks terrible! All of the fonts appear to have a 'shadow' next to them - almost like an old analog VGA with 'interference'.Thinking it could be the cable, I went back to my old Mini's DVI->HDMI cable (and used the new Mini's HDMI->DVI adapter to connect to it). Same results.The Westinghouse monitor's native resolution is 1920x1200. The Mac says that it's configured for 1920x1200.
View 14 Replies View RelatedI have a 2009 unibody macbook pro. I have 42 in lcd tv. I have a minidisplay to vga adapter and a vga cable. When I try to connect the monitor to the mbp when the lid is open nothing is detected. I do not get any options to change to mirror mode or am able to change any settings regarding the monitor. I can change the resolution of the built in display only. Now for the twist. If I connect everything, do a restart and close the lid, as the computer boots up the external monitor works. Its the grey boot screen with the apple logo. But as soon as the computer begins to load the desktop, the monitor losses the signal. At first I thought it was going into sleep mode, so I hooked up a usb mouse to keep the computer awake. I tried the process again, and as soon as it goes to the desktop it losses the signal. So I don't think it is sleep mode. I downloaded the minidisplay prot firmware update, but because the screen is not detected when the lid is open I cant run it. When the lid is closed the computer either goes to sleep or doesn't send the desktop signal and I still cant run it. Nothing happens if I change between the video cards (9400 and 9600gm). Is it a resolution issue? Do the vga cables have a max resolution that is lower than 1900 x 1200?
2009 unibody intel macbook pro
running 10.6.8
3.06 ghz 8gb ram
Just bought a Samsung 2333SW Monitor and plugged it into my Mac Mini. The screen looks like the monitor was dropped (psychedelic) when the desktop is displayed. It worked fine on my 17" Samsung monitor, but not the 23".
I exchanged the monitor, and its not the monitor. I was told its the driver on the Mac. I cannot find any driver online for my Mini through Apple, or even at the Samsung sites.
Is there a noticable difference between using a mini DP DVI vs mini DP VGA to external monitor that has both types of inputs?
Info:
17 MacBook Pro i7, Mac OS X (10.6.5)
I have always wanted a mac and for the most part it has been money in past years that have kept me away. Aside from apple.com tutorials and playing around a few times at my local BestBuy I know very little about using them (or any computer for that matter). Between this forum, available books, and ease of use I figure it'll all work out. I do have a couple of specific questions and would greatly appreciate some advice.For me I have to go mini because I have an eye disease, and some other eye related issues that make me extremely sensitive to the LED backlit glossy displays that the imac and macbooks use. Even when dimmed. So I have no choice if I am to own a mac now, it's mac mini or nothing.
View 19 Replies View RelatedIs it possible to use my iMac as an external monitor? I want to use my Mac Mini with it.
View 5 Replies View RelatedJust about to purchase the new mini and I need to buy the adapter to use dual monitors. Is it the Apple Mini-DVI to DVI Adapter that I need to buy? I'm connecting my Samsung 24" which is dvi.
Just wanted to double check before I purchased it.
I'm putting a computer in my kitchen that anybody in the house can use (kids & parents). It will be hooked up to a 24" LCD and also act as a small file server, dvd player and perhaps eyetv dvr.
I like the mini because it is small (can hide in the cabinet where spills won't get it), is cheap and uses only 13W when idle. But when I think down the road, 4 year old laptops seem a lot more useful than 4 year old mac minis. So I'm a bit torn.
So my questions are:
- Does anybody know how much power the macbook uses when "idle" (just running finder).
- Can the macbook be run with the lid closed? (I know old powerbooks used to vent hot air through the keyboard.)
(Then again, I have the computer in the kitchen so I can watch my kids on the computer. In 4 years they'll be 5 years old and probably want a laptop they could have in their own room - exactly what I want to avoid. And I'll probably upgrade my macbook pro by then anyway.)
I have an 13" MBP that I ordered new in April, 2012. It is running Lion. I have an external monitor that is capable of 1440x900 resolution. I have an external keyboard and trackpad hooked up, and I like to close my MBP up and stick it in a BookArc. I want to be able to have the internal display disabled and to have the MBP only allow me to put windows on the external display, so long as the lid is closed. I also want to be sure that I am taking advantage of the resolutions available on my external monitor, which are higher than those supported by the internal display (specifically 1440x900).
This doesn't seem to work because I either have to allow the MBP to continue to draw my desktop across both screens (internal and external), OR use the "mirror displays" mode, which restricts my resolution of my external monitor. This means I either forgoe the additional resolution benefits of my external monitor, or I end up with windows that fall off-the-cliff, so to speak, because they are drawn in the portion of the desktop that would be shown on my internal display (which is closed).
I've read the community support pages on using the MBP with an external monitor, most relevantly, this page. It simply recommends using the "mirror displays" option. However, this option, as I mentioned above, doesn't allow me to make use of the additional resolution, and my external display looks bad. how to keep the 13" MBP in closed clamshell position, with the internal display disabled, and use my external monitor at resolutions higher than those allowed by the 13" MBP but which are available to my external monitor when not in "mirror displays" mode?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), External display (1440x900)
I am wondering that is it essential to connect power adaptor all the time while operating in closed calmshell mode? When I unpluged the cable it didn't work. Is there some way?
Info:
MacBook Pro, iOS 5.1.1
I just purchased a Toshiba 14 inch monitor to use as a 2nd display for my Mac Mini. I've downloaded the driver successfully - have the bugger plugged into the back of the mini... power is on
Info:
Mac mini, Mac OS X (10.7.3)
Can I use my I Mac monitor with a Mac Mini?
Info:Mac mini
With the announcement of the new Mini's, I'm considering selling my MBP and ATV and replacing them with a new Mini and iPad.
My wife already has an iPad so it would be great to solely control the Mini with our iPads but do you new a keyboard and mouse for initial installation or at any point after? It really would be a waste of money to have to buy them just to get the thing running.
Is there an app out there that can act a full BT keyboard if need be? Rowmote looks pretty sweet for day-to-day use.
That said, I don't think the Mini would get much use, the iPads would be our main net/mail/cal/etc companions, the Mini would simply be the mothership, holding all our music, videos, etc. I still need a full computer for all my photo and home movie editing, otherwise I'd consider a beaten up old powerbook or iBook.
Also, what would be the advantage of getting OSX Server? If it helps, we have no other computers in the house, only 2 iPhones and 2 iPads (potentially).
so i have an ibook G4 that has a broken hard drive, but the screen still works. i was wondering if it was possible for me to be able to hook it up to my mac mini and use it as a second monitor?
View 3 Replies View Related