Mac Pro :: Long Boot Time Caused By HD With Windows Install?
Dec 26, 2010
I had a spare drive bay in my Mac Pro, so decided to install an extra HD, partition into two, and put on Windows XP on one partition and Windows 7 on the other.
I've now done this. I didn't install using Bootcamp, since it doesn't support two Windows partitions on the same drive, so I removed all my Mac HDs and then installed both versions of Windows as though installing on any other PC, only using Bootcamp to install the Windows drivers after.
The Windows HD is formatted NTFS with MBR partition scheme. With my three Mac OS drives (1 system, 1 Audio Data, 1 Timemachine) now back in, everything is now working, with holding the option key on startup giving me the choice between Mac OS and Windows. Selecting Windows brings up the Windows 7 boot menu, with the option to boot into XP or 7.
The only problem is that boot up now takes an extremely long time, and the part of the sequence that is taking a long time is worrying me.
When you press the power on button, you get the boing as normal, but it's now about 50 seconds from the boing until you see the grey startup screen (or boot menu if you are holding option). Once into the grey screen, start up time is as it was before.
Is this normal behaviour with three normal HFS+ and one MBR NTFS drive with two Windows partitions in a Mac?
I have tried resetting the PRAM but it made no difference.
If it's normal, I suppose I can put up with it, but it would be great if I could do something about it.
I hit "Start" in Parallels to boot Windows, it takes like 1:45 min till I see the wallpaper on my desktop. I use Windows 7 on Parallels. I remember it also took about the same time for XP Pro to load on my Parallels/VMWare before.Why does it take so long?? Does it also take so much time to boot for you guys? If I boot my Windows through Bootcamp (not Parallels) though, it only takes like 45-50 secs for the desktop wallpaper to display
I have a 2 week old iMac 27", i7, 2tb Hard Drive, 16gb RM
In the second week the boot up times became very slow.
I would turn the machine on and get the chime within 5 seconds or so.
Then just a black/blank screen.
Eventually after about 10mins I would get a white screen then it would boot up normally.
Now the machine just doesn't get to the white screen. So I get the chime and then just darkness. It does sound like the machine is on (usual quiet imac whirring).
I've tried various key commands when I turn the machine on including pressing C with the install disk in the dvd drive and the alt, control, P, R pram reset.
I've also tried unplugging all the cables, leaving the machine for a minute and switching back on. I did manage to perform the PRAM reset once. I reset the machine and it booted fine.
But now when I switch it on just darkness.
I've called after sales and will try to get the machine replaced but in the meantime is there anything I could try that might make the machine work? I need to do a remix this weekend (deadline Monday) so really need to get it working.
The actual boot up time is very fast. However, when my dock and menu bar load, it takes like a minute before any apps begin launching. I only have Caffeine launching at start up.
Where else I can look what's being executed upon boot? because under process I see BlackBerry's Daemon (I'm no longer BlackBerry user, I'm okay to leave Application, but I don't want it to boot up during startup) and I'm pretty sure there is other stuff as well.
I upgraded the stock 160GB 5400RPM HDD in my MBP to a WD 320GB 5400RPM drive, and I restored using Time Machine. Now it takes a while (around 10-20 seconds) to bring up an Apple logo when I boot the machine.
My daughter purchased a MacBook Air 13" last 1.7 GH Intel Core i5, 4GB Memory. A couple of weeks ago, my daughter noticed that her computer was taking a long time to boot up. Apparently the bootup time has progressively lengthened to 3 - 5 minutes to get to her desktop. What happens is the boot-up process seems to stall on a grey screen and beach-balls until the desktop eventually appears.
I've had a Vista 32 PC and it booted pretty fast. I now have a fully loaded iMac (newest one available) and Vista takes abnormally long to start. OS X boots very fast, and once Vista is loaded, it runs normal, no problems. I'm just wondering if there is a way to reduce the boot time, and why it would take longer to boot on this more powerful computer than my last generic PC, or if that's just a drawback of boot camp.
I tried running a chkdsk /f /r on my late 2008 MBP yesterday. Started around 18:30, it was still running this morning and had only got to stage 4 of 5 and was on 18%, that's over 12 hours! I'm running Windows 7 64bit RC, and the partition size is 84 GB. My desktop computer on the same o/s and a 150 GB partition, took about 45-50 mins to complete this on the weekend, and I was wondering if any other MBP users had run a full checkdisk and how long it takes on their machines?
I have to boot into bootcamp frequently and it seems that shutting down osx, restarting into win 7/bootcamp takes quite a while... 1 minute and 40 seconds...?
This especially considering my osx startup is on an intel gen 2 ssd, and the win 7 startup is on a seperate gen 2 ssd... shouldn't it be 30 seconds or so?
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
I have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
Is it possible to install Windows 7 on an internal disk via Boot Camp and then remove this disk and use it as an external drive? I have two drives for my mini, one in use and one in an external case; unfortunately, neither have room for everything plus Windows. If the answer to this question is no, then I'll buy a bigger drive. I'd just like to avoid this if possible (I already have a ton of external drives and not enough ports to plug them into).
I have been trying to install Windows 7 X86 RC1 on my brand new early 2009 iMac and have been having the same problem every time.
Initial installation goes very smoothly, but all the trouble begins when I load the Boot Camp setup.exe from the Leopard disc.
During Boot Camp installation I get a compatibility warning about some of the Apple Boot Camp drivers working correctly with this version of Windows.
If I go ahead with the installation then what happens is I get a BSOD and then Windows becomes un-bootable. This is repeatable as it happens every single time I do the installation.
Things initially seem to work up until I load boot camp assistant from the Leopard install disc, so I'm wondering if there are other drivers available that play well with Windows 7 for my iMac that I can try? I've followed several Boot Camp tutorials for iMac with Win7 and am pretty sure I am doing everything correctly, but things just aren't working.
I want to know if you guys have a really slow windows 7 and/or Snow Leopard boot up time?I get a nasty white screen before the main selector kicks in.I'm using a mac mini late 2009.
I'm getting Win7 this week. I'm getting it free from school and unsure at this point whether it will be 32 or 64 bit. That said, here's what I want to do with my setup.
1: School. I have to use Office 2007 for my classes. Office 2008 for Mac is not supported, because some of the formulas that you create in 2008 won't convert correctly into 2007 format and I can't have that. I will also use IE due to the fact that neither Firefox nor Safari will play my Mediasite classes correctly in Silverlight. Only IE allows me to speed up the playback. I am going to use Parallels 5 for this.
2: I game, but not much. The one game I love and will definitely put on my Mac is Morrowind. I want to use Boot Camp for this reason.
Soooo, I have been told that if I'm going to install Windows under Boot Camp that I should do that install first. Then install Parallels. I'm really not sure how to do any of this. I understand that I will only need to install Windows a single time and that it should work under with Boot Camp or Parallels.
i have the Boot Camp install PDF from the Apple site, but I'd love some tips, tricks, help, advice, words of wisdom, etc., from this forum. Please tell me what you think about which to install first, what approach to take, how much HDD space I should partition when I install under Boot Camp, etc.
I'm asking as a new Apple convert using Snow Leopard 10.06.2.
I have an iMac running Snow Lep and a laptop running Windows 7. The laptop did not come with a separate disc of the Windows OS. In the absence of the OS disc, is there any way to install Windows in it's own partition using Boot Camp, such as by copying an image of the laptop onto the iMac?
First I read "http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf". That's all well and good, but nowhere in this document is that "USB storage device trick" (see "http://support.apple.com/kb/DL995") mentioned! On the other hand, in that DL995 description there's nowhere mentioned that there are additional steps to do afterwards!
first I prepared my USB storage device according to DL995, made a 201GB partition, inserted the 64 bit Windows 7 DVD and ran the installation without any problems.
Windows works, but brightness and volume controls for example don't work.(When I press F1 I get Windows help etc.)I can't find Boot Camp installed under Windows anywhere!
After the same installation on my second 21.5" iMac everything looks identical with the exception that under "Bluetooth Devices" on one machine there's "Apple Wireless Keyboard" and "Apple Wireless Mouse" installed - on the other machine NOT, even tough I've NEVER used Bluetooth devices any of both machines (just used wired Apple keyboard and USB Trackball).
Before I continue (OS X disc, 3.1 update... if required at all?), how can I verify that the USB storage device had been used at all?
I've browsed and searched the forums to find a sollution for my problem, but was unsucessful. Sorry if this question has allready been asked.I've finally managed to install Windows 7 on my MacPro 1,1. I have two hard drives: One with leopard installed and another with WinXP and Win 7 on seperate partitons. The Win 7 installation went smoothly as far as I can tell, but now I'm unable to boot into Win 7 without the install dvd.
the first steps of boot camp came simple and easy partitioned and load installation disk but when i click on "install now", an error came up stating "windows could not retrieve information about the disks on this computer"
I thought maybe that has something to do with PAL vs. NTSC but both the iMac and the window 7 software were bought in Germany (where I live) so I just don't know.
Last year I also bought and installed Parallels on my iMac but never really used it. The reason I'd like to install windows is because I really need to learn AUTOCAD and it runs on windows.
I just mention it because I guess I have the option of using Parallels (though it still seems to have an old version of Vista on it and I can't get rid of it).
I just got my new 27" iMac, and wanted to install Windows 7 64 bit via Boot Camp.The installation went fine, but now when the iMac restarts, after the Windows loading screen, I just get a black screen, no display.Windows works, I was able to use it in VMware. I read here and there that there were problems with the ATI card in Windows 7, so I tried to install the Boot Camp drivers in VMware, even the ATI Catalyst ones.Even after that, no display in Windows.I read that someone here used a external display to make windows work at first.
I have a Macbook and I had Windows XP on my Boot Camp partition, but I wanted to upgrade to Windows Vista because my friend recently found their Vista install disc. I backed up all of my information from my Windows partition on my external hard drive, booted the Apple side, and ran Boot Camp Assistant. It made the separate partition, but then when it asked me to install Windows it said insert the Windows install disc, so I did... but instead of my Macbook restarting and installing Windows... it restarts... then you hear the CD drive/optical drive speed up A LOT, then it slows down, and ejects my CD, instead of running the setup. I became so desperate to get Windows back on my Mac, that I tried installing Boot Camp with my friend's XP SP 2 install CD. No luck. I thought my CD drive was damaged but it's not.
For starters, the computer recognizes when I insert the XP & Vista CDs... it appears as, "XP_HOME_SP_2" with a CD icon on my desktop on the Mac side...
I have used disk utility to take DMG files such as OSX and create a disk image onto the flash drive and upgrade / reinstall the OS on my mac.
I don't have any blank DVD's to burn the win 7 ISO onto so I tried doing the same by putting the ISO onto a flash drive and it doesn't work in Disk Utility. I tried doing it on a XP computer which was (I think) successful in putting the disk image onto the flash drive.
Now when I reboot and hold option I don't have any option to start up the computer other than the Mac HD.
I have installed Paragon to be able to read and write NTFS files / disks.
Does anyone know if its possible to install win 7 via USB onto a mac or am I wasting my time?
I have a new MacBook Pro 13-inch mid-2010 model, and I noticed that when I am in Windows 7 and try to use my headphones through the audio jack, I get no sound. I looked on Apple's website, found the 3.1.3 patch which claims will fix headphone sound, downloaded it, but when I went to install it, I got this error:
"The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch."
This is frustrating because I DO have Boot Camp 3.1.0 installed, which I assume is the version needed to upgrade, and Boot Camp IS installed. I also downloaded the 32-bit version as that is the version of Windows 7 I have, and just for jollies I tried the 64-bit version but that yielded the same error.
What am I doing wrong here? How can I install this patch? I would very much like to be able to have functional headphones.
2010 MacBook Pro 13' Mac OS X Snow Leopard 10.6.4 Windows 7 Ultimate x64 Bootcamp 3.0.2
I'm trying to install Windows on my computer, and the install works fine, with no issues. On my very first boot into the desktop, everything looks OK. But when I reboot Windows, it freezes on "Installing device driver..." and then I have to press the power button to turn the computer off. I noticed that the device driver it's trying to install is "IEEE 1394". Then, when I restart my computer it freezes on the "Welcome" screen and I have to restart, only to be met with the same "Welcome" screen freeze every time. I have tried all 3 different "Safe Mode" options, burned several different Windows install discs and tried to repair my Windows install using the Windows DVD, but the repair program says that my Windows version isn't compatible with the disc version, even though it's the one I originally installed it with. I even saw in one thread that a guy fixed this same exact problem on his Mac by pressing the power button in anticipation just before the freeze. I tried that solution many times and it didn't work either. I also saw on another website some console commands I can use to try and resolve my issue, but if I cannot access a console, how am I supposed to use it?! I noticed that "Loading Driver C:System32DRIVERSCLASSPNP.SYS" hangs for quite some time before loading the welcome screen and crashing there. A few times I even notice that it would freeze on that process itself. Either way, I can't get into Windows. I've tried every solution I could find, and none of them worked at all. I'm really mad and sad right now because this is so frustrating. I just want to be able to get Windows on there so I can play my favorite games, use Office and work in Visual C++ Express Edition.
