I downloaded the 3.1 upgrade but the .exe doesn't seem to launch when I open it.
Do I need to have bootcamp installed first?
Did I read somewhere that this model wont be supported for 64bit windows?
I recently installed Snow Leopard. It works faster than before and it gave me 8GB of space back. But, after looking through Applications in system profiler, I found out iTunes is not 64-bit unlike Safari and other native applications that have been re-written to 64-bit. I remember Apple said iTunes is also re-written. I must download a new version or it's included in an update (I'm waiting the 10.6.2 update to download at the moment)?
View 9 Replies View RelatedI was told to run Vista 64bit for games, but I was wondering about this� Since many applications don�t even have a 64bit version out and I don�t think games are 64bit, will they all run under vista 64bit? I have a feeling this might be a dumb question, but I just wanted to make sure before I go out and buy Vista 64.
Also do you think windows 7 is better for games? Will it even run games that have not been written for it? Or would I just be better sticking with vista 64 until everyone has caught up and made their apps compatible with the new windows 7? I mean will antivirus programs, ripping apps, etc work under windows 7 without a hitch, or should I wait and just use vista64 for now?
Here's a new one for me. My 3 media keys don't work for any applications such as Windows Media Player, iTunes, Open Pandora. Everything else works though?!? I reinstalled the keyboard driver and there has been no change. It's like those keys are disabled. Pressing fn will let them use their typical F function, so they work, it's just being blocked by the BootCamp manager or something.
Something else - they keys are invisible to the OS. I can't use a 3rd party hotkey manager to just reassign them.
Last night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
I'm new to using Windows on a Mac but need to do it now for some video rendering applications that have transcoding, filtering, effects (like VirtualDub) that are only available on a PC.
I have a 17"MBP (3 months old), 2.8Ghz Duo, 4Gb RAM. I recently upgraded to Snow Leopard, was excited about 64-bit though I'm not an expert, I just heard it would be faster.
I didn't realize SL doesn't boot 64-bit anyhow, that you need to hold "6" & "4" at startup to get it to boot in 64bit mode. This surprised me because I figure many people assumed SL was 64bit! Just getting it to boot properly was a hassle. The 6 & 4 trick didn't work for me.
I had to edit the preference file which wouldn't save at first either because of permissions (I had to drag it to my desktop, edit it, save it, then drag it back to the folder and enter in my administrator password).
Only then did I realize my brand new eSATA Express Card didn't work in 64-bit mode. Upsetting because I just bought the hot new Sonnet Tempo card for $200 that claims to work with Snow Leopard. So until it works I'll be running 32bit mode on my Mac.
But if I want to run Windows 7, does this mean I can only run the 32bit version?
I'd appreciate it if anyone could offer me some advice on whether to go with the 32bit or 64bit version of Vista on a 4-core 'Nehalem' Mac Pro. I've read that some drivers will fail to work under this version of the operating system - is this the case for the hardware in the Mac Pro (particularly the HD 4870)?
View 6 Replies View RelatedI currently have 268GB on my hardrive.
I have the 17" MBP Unibody so I want to start gaming again, and I have thought about Xp, Vista, and 7 and I have decided on windows 7 because its free and allows for DirectX10.
1.
Now I am trying to conserve hard drive space but should i get the 16GB 32bit or the 20GB 64bit version of windows 7 and how much space should i allocate for the partition?
2.
Games i will be playing:
Counter Strike: Source
Call of Duty: WaW
Maybe Battlefield 2
3.
I plan on getting some newer games since I don't have my crappy computer anymore.
Any suggestions??
Hopefully someone can point me in the right direction.
I have an 8-core 3.2GHz 2008 Mac Pro with 16GB RAM. I've just ordered the EVGA NVIDIA GeForce GTX 285 graphics card and am hoping to turn my beloved mac into a bit of a sexy PC gaming beast for some evening fun. Already purchased Batman Arkham Asylum, Gears of War and an Xbox 360 controller to get me started
I'll cut to the chase. Microsoft are offering a free upgrade to Windows 7 if you buy Vista at the moment so that's not the issue. The issue is 32bit or 64bit for a gaming box - which is the best version to get for performance and compatibility with gaming on windows?
I'm looking to purchase either the 32bit or 64bit version of Vista (with the free upgrade to the corresponding Windows 7 version).
Which is the best to get? 32bit or 64bit? I've been reading that some games don't work well with 64bit Windows. Lots of conflicting articles and comments.
32bit or 64bit Windows... what's the best for a bootcamp gaming rig?
i was just wondering if this is even possible... i started reading this thread but it was way too confusing for me so if you could explain it to a computer illiterate it would really help me out.
[URL]
I recently reformated my PC and put XP Professional 64bit on it, did all the updates that I possibly could. Installed/downloaded all my games, updates, patches. Customized windows with everything that I like. Installed my AVG 8.0 Pro antivirus, Just everything that I want with a PC.
is there a way to totaly save my entire windows install? Like if I were to upgrade from a 500gig to a 1 TB hard drive? I know some PC repair shops use a program to do this. I think it has the word "Ghost" in it? Is there another way also? I have an external 500 HD that I would save w/e I need to save on it to make it work.
My Windows XP partition is getting claustrophobic and it's about time I upgraded from an 8 year old OS.
Anyway, what's the easiest way to do this? I assume it'll have to be a clean install to go from XP to 7 and 32bit to 64bit.
I have a fair number of programs and several gigabytes of Steam games which is why I haven't done it yet.
I have a 15'' unibody mbp with the 9600M, and the nvidia notebook driver installer always fails to recognize my graphics card and quits. Is there a way around this? I have tried modifying some INF files but it doesn't work.
View 6 Replies View RelatedDo i just insert the windows 7 64bit DVD and install normally? I'm worried about the drivers phase. I have the MBP that got released early 2008.
View 3 Replies View RelatedToday I got my new 21.5 base model iMac, along with windows 7 Ultimate. I was wondering if I should install the 32 bit version or the 64.
View 3 Replies View RelatedHas anyone had success installing Win7 x64 on a new iMac?
I know the previous gen didn't support it. I am wondering if the new ones do.
Because of some of the gaming I do, I would really like support for more than 4GB of RAM in Windows.
I searched around and found some limited references to people attempting it.
I have 16gb of Ram installed on my iMac and Windows 7 installed amd it is only using 2.23gb of it, and it is very annoying. I need to know if I can install 64 bit edition Windows 7 on it before I go out and spend the money on it.
Info:
iMac (27-inch Mid 2011), Windows7
I've installed Windows 7 64 Bit. I tried installing Boot Camp from the Leopard DVD and it gets to the part where its trying to run the service KeyAgent but it fails. This is the message I get.
"Service 'KeyAgent' (KeyAgent) failed to start. Verify that you have sufficient privileges to start system services."
I've tried running it in compatibility mode for Vista and made sure to have it set as run as Administrator. I also download BootCamp 2.1 for Windows Vista 64 but it wont even start. I also did the Compatibility mode and administrator for it.
I have downloaded the RC version of Windows7 64bits. I burned a DVD with 1x speed but when I tried to boot via DVD (pressing option key) it shows 2 option for DVD, Windows and EFI. I tried both and none worked. The Windows version starts and a DOS menu appears with 2 options which doesn't show what it is and then it freezes. The EFI option freezes imediately on the boot screen.
View 5 Replies View RelatedDoes anyone know if or where these are uploaded? My Snow Leopard disk refuses to install 64bit ones because i am on a 2006 Mac Pro. I've previously been running the Boot Camp 2.0 64bit drivers from the 2008 Mac Pro and they've worked just fine in vista.
View 10 Replies View RelatedI just downloaded Windows 7 (64-bit) from my school's software hub and burned it to a bootable disc. I partitioned my drive, and was able to boot from the installation CD. Now, for some reason, my copy of Windows 7 must be different from EVERYBODY else's, because when I start, it asks for the language, and then I click begin install. Here's where the problem comes. I immediately get a dialogue box that says I am missing a required device driver in order to continue the installation. Please insert the CD, USB, etc. with the required drivers. (Of course, it doesn't tell me what they are.) Now, here is where I would put in my Snow Leopard disk, if it weren't for the fact that the disk refuses to eject. So, I can't even begin the installation at all. Is there somewhere I can go on the disk to find these drivers and put them on a USB flash drive? Or any other work around for this?
View 6 Replies View RelatedI'm not sure which forum this belongs in, but given that its really a vmware question, I'm thinking that applications is the best fit.
Anyways, if I decide to take the plunge and get windows 7, it will be for the express purpose of running within vmware. I have zero interest in running it in bootcamp (I use fedora and boot into that) so basically which version of win7 would provide the best performance. The 32bit or 64bit flavor
i have a Mac Pro 1,1 (2007) running 10.6.2 with Boot Camp 3.0.1 and i want to install some version of Windows 64 bit via Boot Camp so i can utilize all of my RAM for playing PC games.
I've already done a bit of research on this, but i cannot get a clear consensus on which ones will work (if any).
Does anyone know of any versions of 64 bit Windows that i can use to successfully install on my Mac Pro 1,1 with boot camp?
I've been trying to install Windows 7 64 bit on my girlfriend's computer, it's a 13" MBP, 4 GB, 2.4 GHz (mid-2010, 4 weeks old). I got through the installation without a hitch, got to the desktop, installed the Snow Leopard drivers, restarted... and then it froze after I typed in the password (the cursor circle froze, keyboard-trackpad unresponsive). I cleared the Bootcamp partition in OSX, repartitioned, and reinstalled again - this time without a password. It got to the desktop, and then after a few seconds the keyboard and trackpad became unresponsive again. This happens only when I install the SL drivers, upon restart. Now, I've tried reinstalling W7 a few times. I reformatted the whole disc, reinstalled SL... and still the same problem. I'm using a Windows 7 ISO from my university, the same ISO/Disc that I used to successfully install Windows 7 on my MBP.
I have since downloaded it twice, and burned the ISO three separate times, at 2.4x using Disc Utility. I've seen two similar instances discussed on other threads, but they were either adjacent to the main thread discussion (and unresolved), or just unresolved. In the installations that I've run since the initial few, I have run into issues that seem common (stalling when copying system files, etc.) I have since reformatted the whole disc, and those problems haven't arisen since. Also, I have successfully installed Windows XP from a university ISO on her computer. But she really needs Windows 7 64 bit... sorry for the long post, trying to be detailed. I updated SL before partitioning, and it's Bootcamp 3.1 (build 2328)
Is the 64bit and 32bit versions of Vista in the Vista Home Premium software? Or do you have to purchase the specific one? How can you tell the difference when looking at the package?
View 2 Replies View RelatedI installed Windows 7 64bit on a boot camp partition on my new Macbook. I remember when I installed Boot Camp 2 on my iMac, it allowed me to burn a cd with all the drivers. There was no option for that this time around. I want to be able to use my multi-touch track pad and I just can't seem to find out how to do it? With the last version everything just worked and took me step by step, whereas this time, I'm a little confused.
View 12 Replies View Related I have a iMac 27" i7 8GB Ram. I installed Windows 7 64 bit. Everything seems to work just fine, except Blu Ray playback.
I have a LG BDRW drive in a 5.25" external caddy. When I try to play a Blu Ray using the bundled CyberLink PowerDVD HD software it says I dont have a HDCP display so it asks me to run a 'BD advisor' tool for more info.
That tells me that both the ATI 4850 card AND the display are not HDCP compliant. I know they must be so whats going on!?
I know that this question was answered for XP but the warning on the System Builders Version of Windows 7 Home 64 bit was scary and I was wondering if anything has changed with the activation on Windows 7. Has anyone used this version successfully on bootcamp 3.1 (iMac 27 inch)?
View 2 Replies View RelatedSo I just finished installing Windows 7 Professional 64bit via boot camp, but I had an issue when I put in the 10.6 disc to get the Drivers for everything. I'm running the 2.4Ghz Aluminum MacBook (not the pro). When I try to run the disc, it says that x64 is not supported on this machine. Am I boned? Or are there other options, because I really don't want to buy 32bit, because my school provides 64bit for free. I'm just looking for the drivers for the iSight, trackpad functions, and the keyboard functions (volume, iTunes, etc).
View 5 Replies View RelatedI'm trying to install Windows 7 Ultimate 64 bit on my late 2008 MacBook Pro and everything went smoothly until it came time for me to pop in my Snow Leopard disk and install the drivers. When I put the disk in I get a window called "Install Assistant" that has two options: "Remote Install Mac OS X" for MacBook Air computers and "DVD or CD Sharing" again for MacBook Air computers. This doesn't seem right. Shouldn't I get a window that lets me install the necessary drivers for Windows 7? I've also tried my 10.5 Leopard disk with the same result. I have also tried downloading the BootCamp 3.1 update, but when I attempt to install it I receive a message telling me that in order to install Boot Camp 3.1 I need to have BootCamp 3.0 or higher.
View 3 Replies View Related
