On my MacPro I have 3 USB ports on the back and 2 on the front. I have 7 periferals i want to connect to the computer and they all need to be connected to a USB port on the computer in order to fuction. Hubs I have testet can not help. On the front of the computer there are 2 USB 2.0 porte can they be used?? If yes
are cables avaiable ( mail stick for the computer port at one end and male USB stickfor the periferel on the other end ). Alternatively are there useable Hubs on the market?
I have my MBPro and am set up as the only account on the computer and it is set up as admin. I have checked absolutely every box to enable me to install items; but each time I do try to install I get the error message
The operation cannot be completed because you do not have sufficient privileges for some of the items.
I just recently bought a new macbook, and I transferred all of my files from Windows XP onto the new computer. Whenever I try to change the names of files that I transferred, it says that I have insufficient access privileges. I can rename files that I created on this Mac, but not the old files. I did the disk repair, and it didn't work. I also make sure that I had privileges for that particular folder.This is my first mac, so I don't really know what I am doing, but I did do the things that would usually be done to repair privileges.
I am trying to transfer a 2.35 GB file (it is windows 7 .iso) to a MicroSD card (using the USB adapter that comes with the micro sd) and when I try to transfer it, it stops and eject the drive and then it tells me "ERROR you disconnected the drive without ejecting it, it can get damage doing that" (something like that) and it says it cant finish transferring the file cause I don't have enough privileges or Insufficient Privileges. The thing is, that the file can be put on the micro sd cause a few hours ago it was in there, i put it on the mac, till I use the micro sd for something else, then now when i want to put it back it does that...
My LiDE 210 scanner which has worked in the past using OSX10.7 but it now says "insufficient memory" each time I launch MP Navigator EX 4.0. open MP Navigator and select 'View and Use', where it says 'Specify the scanned location', select a different scanner location to see if this resolves the issue. I am unable to do this as I get the "insufficient memory" message immediately I double click on the Canon software. If this did not resolve the issue, they recommended uninstalling and re-installing the latest drivers, which I have done but with no solution to the problem. I haved repaired permissions, checked printers in the library and there does not seem to be anything missing or conflicting. I cannot find any reference to TWAIN in the Library and finally the basic scanner functions are available using Image Capture.
Info: MacBook Pro, Mac OS X (10.7.4), Canon LiDE 210
Hope someone might be able to help. I am attempting to copy files from a USB attached to my iMac external hard drive to my new NAS drive system, which is connected through my Airport Extreme by gigabit ethernet.I know the NAS is using a file system that I do not recognize (its a WD ShareSpace, 4TB/3TB Raid 5 NAS), which could be causing the problem. Basically I am attempting to transfer all the files stored on the USB external to the NAS. When I copy all the files and paste them to the NAS through Finder, I get an error saying it could not be completed cause I have Insufficient Privileges to do so. There are thousands of files to go through, but I have pinpointed two folders that are causing the problem, which themselves have thousand of files.
I have had my macbook pro 13" for 3 weeks. The only significant amount of data storage I have on the computer is 2919 photos in iphoto. The only application I have downloaded is pages. I tried to download Mozilla Firefox because my facebook looked strange in safari. My wall page looked great but all subsequent pages look like I'm viewing them on an older version of blackberry.
Question #1. When I attempted to download firefox, a window stated it was unable because of insufficient disk space. I don't understand how this is possible (please see above).
Question #2. Why does facebook look strange now. I remember it working seamlessly when I first purchased the computer and only noticed the problem today. I log in every couple days.
I have an iMac with a 2.8 GHz intel core 2 Duo, 2GB 667 MHz SDRAM, and a 750 GB hard drive with over 400 GB of free space. I just purchased Final Cut Express 4 and when I uploaded my first clip and I tried to render it, it said that I have "insufficient disk space to render." I don't understand how this is possible, I may just have a setting messed up but I need step by step instructions to switch that setting
I am using a MacBook Air 2013 model with OS 10.9.4 (Mavericks). It has a 120 GB HD with about 17 GB of free space. I am unable to download from the Mac App Store as I get an 'insufficient space available" error whenever I try to purchase a larger App (> 2 GB). After looking through the forums I can confirm the following:
- Both the Finder and "About This Mac" report that 16.5 GB of space is available.
- I have toggled Time Machine and restarted my computer with it "On" and "Off".
- The application description does not mention needing more space for installation (specifically I am now trying to download BioShock 2 which needs about 9 GB).
Only the number keys on my keyboard are malfunctioning besides the number 0. For example when I press 1 it appears as q1. When I press 2 it appears as w2.
I am not sure if I accidentally pressed something on my keyboard that has changed the functioning of my number keys. I've tried fidgeting with the keyboard settings in System Preferences and holding down the f6 key but nothing has worked.
My iPhoto is empty, however when trying to upload some photos from an SD card, I get the message, "Insufficient Disk Space. iPhoto cannot upload your photos because there is not enough disk space in the volume containing your iPhoto library."
Does the logic board serial number match the computer serial number?
My reason for asking is that 4 months ago my sisters G5 17" logic board supposedly got replaced with a new or refurbished logic board but it seems by the workmanship of the board something fishy is going on.
The Mac Pro only has 2 400 and 2 800 ports. and I was wondering if there was a way to get more, or split them. I have a lot of externals and an isight, etc. Or maybe a solution is daisy-chaining harddrives, does anyone know anything about this, or how to do it.. I'm afraid to experiment with my data.
Whenever I hit the right or up arrow key on my macbook, it does shift either right or up but it also type either the number "8" for the right arrow key or the number "9" for the up key. How do I get this to stop?
Since apple is now in fashion to reduce the amount of ports in laptops, what do you think will happen to next MP model? Which ports do we loose and which will survive? Will there also be proprietary graphics cards with miniDP?
Is there any real use for Toslink port in consumer (prosumer) life? Or is it just for audio professionals? I can easily find Toslink cables for sale on web, but no attachments using such cables. So what is such connection for?
I bought a new micro SD card for my blackberry and I need to format it before it'll work. It came with a USB adapter but I have no idea how to access my USB ports. I've also heard that I can format it by putting it in the phone and accessing it as an external storage device, but I have no idea how to do that either.
I'm having a NAT issue while sharing my internet via ethernet to my xbox360. I've opened the required ports except for 88 in my router because it uses that for services (friggin belkin). I'm still getting a strict NAT on my xbox and I should have a Moderate NAT if I have every port but 88 open. I know that Tiger had a setting for port forwarding in system preferences, but for the life of me I cant find it in snow leopard. Does anyone know how I could forward the necessary ports?
I have the microsoft arc mouse and keyboard and each of them have seperate transrecievers. The macbook air only has two ports. If I bought a usb hub would this enable me to plug the transrecievers into the hub so I would have 1 usb port free? Im considering returning them and getting logtech's unifying transreciever, but they have no small keyboards that are compatible with it.
My usb ports in my c2d macbook don' t seem to be working. When I plug in my digital camera (sony) or itunes phone (motorola), nothing happens. I tried both of these devices on my 2 old powerbooks and they sync fine. Anyway I can check whether my macbook usb ports are functioning?
would it be possible to solder any wires to get power onto the USB ports on a G3 iMac? I have a blue 500Mhz model, if that would make any difference. the reason that I want to do this is because all of the iPods use USB now, and I would like to be able to charge mine while I am syncing it.
Hi, i have a 24" intel core 2 duo 2.4GHz imac aluminum 1 gb ram.
I first noticed this problem when i plugged in my ipod, it would not open itunes, appear in itunes, the desktop or finder. i managed to resolve this problem by reinstalling itunes and plugging in my ipod before i turned on the computer, but i can not change anything as it gets stuck while syncing with my ipod and says that my ipod is disconnected, i reconnect but the ipod not not appear on the screen.
All of a sudden a few days ago, I realized that my keyboard was not working. It was plugged into my 23" ACD. So I unplugged it and put it into my Mac Pro. It worked. So I decided that my ACD's USB ports were not working. A phone call to AppleCare and he told me to take the display for repair to the Apple Store. I just did that, and the USB's worked fine in the store. I take it home, still does not work. So I thought my USB ports on my Mac Pro must be bad. But everything else I plug into all three of the back ones works just fine; but my ACD does not. In the store, he used all of my own cables / power adapter. Why is my USB not working for my ACD but it is for everything else?
I just moved into a new apartment with my roommate and we got a new router - a Dlink DIR 615. For some reason, I can't seem to open the necessary ports for Transmission. I've been forwarding ports for Transmission forever now, and it always works. I've never done it, however, on a Dlink router - it's always been Linksys. Is there any difference between the two? Included is a screenshot of the settings. And to avoid all the obvious (I think) questions, I do have a static IP address, I have indeed set the right ports on both the settings and Transmission, and I have enabled everything (again, I think). I'm obviously missing something, but I have no idea what it is.
I occasionally have trouble charging my iPhone via my iMac USB ports. I plug in the iPhone, the screen indicators change to show that the phone is charging (green battery indicator and the lightning bolt symbol). However, when I come back to the phone several hours later, the charge indicator hasn't advanced any. For example, if the indicator showed half-full when I plugged it in, it remains half-full.
The iMac does go to sleep a few minutes after I leave it, but sleep has never precluded an iPhone battery charge on my MacBook, and most of the time it works on the iMac.
Is there anything, besides shutting down a computer, that causes a USB port to unpower while the iMac is sleeping? Does it matter whether I am logged in or simply at the login screen?
I recently went away for the weekend and when I came back my USB ports don't work. When I first start my 24" iMac the mouse lights up but then goes off later on when it's booting up. I really don't know what to do and i'm not even sure if I got any discs with my iMac as it had Leopard preloaded...
