Mac Pro :: Input Digital Audio From The MP To The ADVC 110?
Jan 1, 2009
I have an older Yamaha receiver (RX 596) that has no optical audio in, only traditional RCA inputs. I tried using a 3.5 mm mini audio to RCA adapter that would transfer my headphone output to the CD or AUX input on the receiver. Of course the audio was crap, lots of humming and low volume level.
I also have a Canopus ADVC 110 digitizer. Can I input digital audio from the MP to the ADVC 110 with an optical to RCA converter, and then output the analog audio from the ADVC 110 with RCA cables to the RCA inputs on the Yamaha? Suggestions please for the easiest/cheapest way to get quality audio out of my MP and cleanly into my receiver.
The new 13" MacBook Pro unveiled at WWDC makes room for its new SD card slot and FireWire 800 port in part by giving up a digital audio input port. Instead, the new model uses the same integrated mic and headphone port as the iPhone.Most MacBook users are unlikely to ever employ the combination digital and analog audio input port, which has appeared on all Mac notebooks for years. Podcasters are likely to use a USB mic like the Blue Snowball instead.However, lots of users are likely to want to use their iPhone or iPod touch combination headset/mic with their MacBook for video conferencing, and recent notebooks have added the additional pin required to support recording audio in addition to stereo headphone analog outputs and digital audio output.
wanted to know if anyone has tried using the digital input on the mic for recording. As most of you know the Macbook pro has digital out/in. [URL] I peeked inside the mic hole and there is a diode or some sort just like the output. I have a digital out from another source running into it, so how do you actually pick it up and record it to a file?
I'm going to buy a MBP. I am also going to buy an external display. I'm going to university, and would like to have a 'display' that can also take a console input and receive digital TV. Otherwise I have to buy an external computer display and a TV, which is expensive and not good for desk space!
I have audio that is being sent to my MBP through an audio in line that I would like to monitor for audio quality. The only way I know how to listen in real time to the audio is by way of Audio Recorder, but it seems a little unnecessary to have a recording application open simply to listen to my media that is being sent in. Is there a feature already part of OS X that allows me to turn this on? I looked in system prefs, but couldn't find anything to enable this. I will resort to audio recorder if I have to, but would be very happy if this was already a feature.
I want to create a digital file from a cassette tape.I cannot hear any audio through my iMac system speakers when I send the cassette audio into the audio input jack (mic). Using mid-2011 iMac running OSX 10.7.3
I have my Xbox 360 sound out-putting through an optical digital cable to the digital input of my Dual 2.3ghz Power G5. My mac recognizes the signal but I was hoping I could somehow use the incoming sound to output through my headphone speaker jack on the front of my mac. Both my mac and xbox 360 use the same monitor.
I noticed it doesn't work that way. Is there a way to switch the incoming digital signal to route through my headphone port on the front of my mac? There has to be a way.
Information: Powermac G5 Dual 2.3 Mhz Mac OS X (10.4.10)
My friend is looking into buying the new 27" iMac Core i7 to replace his PC desktop. The only thing holding him back is that he has an analog surround sound system he uses for his speakers. I am having a hard time myself finding a converter that can make his speakers work in the iMac's optical digital output port. Any products out there that will do that?
With my PPC G5 the microphones audio is either too low or none existant. I have gone into system preferences and set the input audio to the max with no change. Does the G5 have a special audio input impedance or is there another setting I should investigate? The output analog audio is working 100%.
The analog audio input on my Mac Pro has stopped working.Audio output still OK; USB audio input works fine but nothing from analog audio input.I know it's getting a signal as I can send the mixer output to a Zoom H4n and it records fine, but I need it to go directly into the computer for tutorial voiceovers. I've tried recording in Quicktime Player, Soundtrack Pro, Camtasia and Screenflow.I get no volume indication in the System Preferences>Sound panel.I opened Apple Midi Setup>analog input and I can adjust volume on the two channels but "Master" is stuck at zero.
Info: Mac Pro, Mac OS X (10.7.2), MacPro2,1 Quad-Core Intel Xeon
I am planning on buying a device that will allow me to convert cassette tapes to mp3 output. The output interface is usb. Can music be input to a Mac through a usb port?
I have a mac mini (solo intel) 10.4 OSX. I have no audio output when attaching an external input source like a CD player or ipod to the input jack on my Mac Mini. Audio output from ITunes or movies clips in IPhoto works fine. I have checked the cables and connections. I have checked the "sound" location in System Preferences to make sure the "built in output" source is selected. The input volume display shows that the audio input is being registered. I have checked "system profiler" in the Utilities folder in Applications to make sure the "built in output" AKA headphone outlet is recognized.
I have the "Soundflower" App. installed but turned off.
why the audio output from the internal sources like ITunes and IPhoto music clips work but the audio output from an external input source does not? Is there some software or a driver required for audio output from an external source that is not required for audio output from an internal source?
I've searched hi and low all over my mac mini and can't find an audio input on it anywhere. I've got an audio output socket for a mini jack, but no input.
Is this usual? And if so, does it mean that the mini is still capable of audio input if I use an usb interface?
Basically I want to input some audio from a guitar and mic and wanted to know if this was going to be a possibility.
I am simply trying to connect my guitar to my mac by using a 1/4 to 1/8 adapter and inserting it to the input on my mac. Once iv done this i go into my sound in system preferences and it shows on the volume bar that its maxing out and once i go into garage band to try and record something all i hear is a "click click"! I have no clue what it is?
Would a standard 3.5mm audio input cable work? Would it fit in the port on my MacBook Pro? These are the cables I am looking at: [URL]. Port Image. I am looking at recording music from my Record Player to my computer with this Tutorial: [URL].
This is probably a silly question, but I was wandering if it was possible to pass audio from the line-in on a MacBook Pro directly to an audio output? I was thinking of buying a PS3 and connecting it to my external monitor, and thought I may be able to play sound through my soundsticks rather than buying more speakers (budget is an issue!).
I know this used to be possible in the "Audio MIDI Setup" application bundled with the system, but I can't seem to find the option in the new version (maybe something to do with aggregate devices?)
I plug in an audio input on my mac ibook G4 and go on system preferences which allows me to select my audio input as a source of sound input BUT when i then proceed to go onto Garageband, Garageband detects my audio input on its preferences but will not allow me to select and therefore leaving me unable to record from an audio input.
This headphone/headset that is equipped with a mic does not work properly when I connect it to the audio input opening. The headphone/headset is only equipped with one plug (is this the proper term?).
When I adjust the audio setting (apple icon--> System Preferences --> Sound --> select "Input" tab --> highlight " Line in; Audio line-in port") I can only hear sounds through the headphone but the mic portion does not pic up. If I hit the mic portion I see the bars move, that would indicate some sound being picked up. However, when I try to use the mic, through Mac Office Powerpoint 2010, the sound (if received through the mic) does not pick up.
Why is this happening? Do I need some extra external component for the microphone part of the headset to work or do something extra in the System Preference area?
I recently had a cracked panel on an old Macbook Pro 15 inch (A1260) and just replaced it with a new one. Ever since i replaced it i have had no sound. Now i consider myself an experienced mac user so i have checked under my sound prefences and it doesnt list anything under sound input or output and things are grayed out. I also had the guy who replaced my panel, who is also my friend, check everything out and he hasn't been able to figure out why there is no sound. he gave me a usb midi device that shows up and works but when unplugged theres nothing.
Another thing that has started is, video online will stop every 11 seconds, and thats with me clicking on the bar when it stops playing after the first 11 seconds.
Basically im turning my room into more of a home cinema, and was looking to use my laptop to play movies into a TV, and sound through a surround sound. I was simply going to use a mini toslink to optical adapter which would plug into an av reciever. I was just wondering who else does this, and what is it like? Is the audio quality okay? Can it sustain high volumes? had any troubles? what does it use, DTS or something?
I am about to buy a 15 in. MBP and I'll be going on a trip soon. I was wondering if there was anything I could get that would let me both use my mac as a tv for my xbox and use a tv as an additional monitor.
Something that would have RCA input/output (the red, white, yellow cords) and would connect to my mac with USB or hopefully firewire 800 (express card 32 would work as well).
I have one particular application I use that requirems me to temporarily switch my audio input and output to different sources. Once I've used the app., I switch them back to their previous state.
I use Soundsource which gives me quick menu-bar access to the inputs/outputs but I still have to set them indiviudally. I was hoping there might be a way to have one or more 'sound sets' which have different combinations of inputs and outputs and then just switch between the sets.
In the absence of any such app. (or is there one?) does anyone know how I could write an Applescript to do this?
Info: Mac Pro Dual 3GHz, 15GB RAM, ATI 3870, 30, Mac OS X (10.7.2), MBP 17", iMac Intel 20", G4 Mini, MBA 1.8 (2nd Gen)
