I have an APC Back-UPS XS 1500 that I'm using for my Mac Pro. I had some issues with it beeping at me all the time, which has stopped. But now it's causing sleep problems with my computer. When the Data Port is connected to USB, the computer won't sleep. I unplug it and it sleeps just fine.
View 4 RepliesCould someone please explain to me why my computer is shutting down in sleep-mode. In addition, when it happens, the fan goes into hyperblow, which doesn't make sense because it would not be operating if the system were completely shut down. It acts like it is shut down but won't respond or wake up, etc. I re-loaded my system software per the Mac Store Genius' advice, but that didn't work. Is it possible that my power supply is going?
View 1 Replies View RelatedOn occasion, my MBP does not "wake up". My only alternative is to restart, Anyone else have this happen? Is there a way to wake up from sleep mode beside a restart?
Info:
MacBook Pro, Mac OS X (10.7.3)
my monitor turns off but my computer won't go into sleep mode, both are set to turn off at exactly 45 minutes of inactivity.
View 5 Replies View Relatedmy monitor turn's off but the computer never goes into sleep mode. I've got both my monitor and computer set to turn off at 45 mintues of inactivity. I tried reseting the pram with no success. I deleted the com.apple.PowerManagement.plist file. but it still doesn't turn off, only the monitor. I've set it to 1 minute but only the monitor will turn off. Manually putting the computer to sleep work's fine.
View 1 Replies View RelatedMy computer sometimes turns off when in screensaver/ sleep mode. Then it doesn't want to turn back on. It eventually does. It's annoying!
View 3 Replies View RelatedWhen my computer is about to go into sleep mode or when it is being activated from being inside sleep mode or any time my computer goals idle for 10 minutes or so something inside my computer clicks. So far there has been no problems is this a normal sound to here?
Information:
G5
Mac OS X (10.4.1)
This becomes a problem when my wife wants to face time me from her Ipad and the Imac is sleeping.
Info:
iMac, Mac OS X (10.7.3)
If I put my comp on sleep mode, could I put it in my backpack and move around? OR is the hard drive still actively on and it may dmg my cpu/hard drive?
View 2 Replies View RelatedI recently brought my computer to the Apple store to repair dents on the outside of my laptop.Ever since I received it back it does not go into sleep mode when I close the screen.
Info:MacBookPro
I'm having a problem with my PowerBook G4 where is goes into sleep mode at random times. Mostly when I am streaming video..or at times the fan comes on, it sounds super high then boom. sleep mode again. After hitting the space bar, it comes back on, but it'll happen again shortly after. I've played with the sleep settings
View 5 Replies View RelatedAs of last night, my MBP started acting very strangely. After entering my username and password, it would enter the desktop for a short period of time and then kick back into sleep mode; the screen would turn back to black. Sometimes it will let me stay on the desktop for a long time and other times it will hardly let me stay on the desktop. I called apple support and they had me start the computer in safe mode; even then it occasionally kicks me out.
The tech guy said that it was a "strange software issue" and not a hardware issue. I thought it was a hard drive issue; my hard drive makes an odd sound when it unlocks (a grinding sound), but it has been doing that for quite some time with no issues. I tried to reset the SMC and it didn't do anything.
How should I remedy this problem? Is this a hard drive issue? Hard drive failure? Has the grinding sound finally caught up with me? I am running OS X; not leopard or snow leopard. I know I need to upgrade, but this shouldn't be happening.
I just had the original 300 GB hard drive fail in my aluminum 24" inch iMac running the latest update of Leopard. I wasn't able to save it using diskwarrior (diskwarrior said it was some sort of mechanical failure) but I was able to recover most of the data from it by booting from an external hard-drive.
So I went out and purchased a brand new Western Digital Caviar Black 1TB drive. The install went fine, it found the drive partitioned it and installed Leopard successful. Then is crashed and disappeared when I left it alone to run all the software updates. I came back and the computer was stuck on "Restart Required" after downloading all the updates. I went to hit restart now, and the system just hanged, wouldn't do anything. So I hard powered down the system and restarted it. It came up with nothing, just stuck on the White Screen of Death. So I plugged the external drive back in and booted from it. Mac OSX couldn't find the drive and diskwarrior would crash if I tried to run it. I tried to boot up from the OSX start-up disk and it couldn't find the drive either.
So I took the case apart and made sure all the connections were solid and the drive was mounted correctly. Everything looked fine so I plugged it in and it started up fine. Finished the updates and the iMac ran great.
So I thought maybe it was overheating, so I've installed smcfancontrol and started to monitor the temp of the drive. I also took the mac apart again and sucked out any dust in the fans or vents. The drive never goes over a 105 F, so it doesn't seem to be overheating.
However, this is where the problem is consistent: everytime the iMac goes into sleep mode, it crashes and the iMac is unable to find the hard-drive again. Unless I unplug it completely for 5 minutes or so. Once I unplug it, it finds the drive and operates like a champ.
I think maybe there's an issue powering the drive back on? Anyone have any ideas?
And my follow up posting later that day:
Quote:
So I ran some tests just to see if was an overheat issue, hard drive malfunction, or sleep issue. I decided to start encoding a video, pulled up Word, Power Point, Excel, started downloading all 6000 mail messages off my server (I never delete my e-mail :-/), also started installing iLife 09, and pulled up a bunch of webpages in Firefox with multiple tabs.
However, I shut off all sleep mode options on the hard drive. I let it run for an hour and came back. Everything is fine, hard drive isn't locked up and smcfancontrol shows the hard drive running pretty hot (115 degrees) but not so hot I'm worried. So it's definitely something to do the hard drives going into sleep mode and not powering back on. It's also weird that I have to leave the computer completely unplugged for 10-15 minutes before the drive is recognized again.
So turning off sleep seems to be my work-around, however, this shouldn't be a long term solution. I'm worried that there is a bigger issue with the iMac, but I'm not sure what would cause this. I've been a PC guy for years, this was my first Mac, and honestly I don't know enough about the inner workings to narrow this down. I would assume this would have to do with the motherboard in some way? But I'm not sure how you would even test it.
After using my MacBook Pro I close the laptop and it goes to sleep. Later when I return to it and open it, sometimes it can't find the network. The computer is able to see that I have an Apple Network available, but it won't connect.Sometimes when I try to connect, it gives me a timeout. How I fix it is to walk over to the router and unplug it and plug it back in. After I get the green light again, I go to the Apple Network and it works.
Info:
MacBook Pro, Mac OS X (10.6.8)
I am currently am using a MacBook Pro mid 2007 and was wondering it is possible to connect it to an external monitor and if so use it when closed without the comp going into sleep mode.
Info:
MacBook Pro
When I need to go somewhere or just eat lunch, I put my iMac to sleep. After that, when I come back to wake it back up, it stays black.
View 3 Replies View RelatedDue to some restrictions I can't let my users mount external HDD's/USB Flash etc. in RW mode. Onle read is allowed, so how can I do that without OS X Server installed?
View 9 Replies View RelatedThis started recently and is quite annoying. Like the title says, if I put my computer to sleep via apple menu/sleep while it is attached to my external monitor the computer will not "wake up". When I try to wake up the computer the sleep indicator stops pulsing and I can hear the hard drive start spinning. As a result I must force shut down the computer by holding the power button. The computer is fully charged so it is not a low battery issue. The external monitor is an 20" Apple Cinema Display, it is attached via Apple's DVI connector.
Unplugging the monitor dongle and replugging it in do not work. Pressing any assortment of keys does not bring the display back up.
I've tried resetting PRAM, disk permissions, and verifying the disk.
Info:
MacBook Pro, Mac OS X (10.7.3)
My iMac wake unexpectedly from sleep mode then goes back to sleep 00:10-00:15 later. Yosemite is current.
Info:
iMac, Mac OS X (10.6.8)
I am running Mac Mini as a home server (turns out to be not a great idea, btw), and even though I set the preference to never sleep or shut down, it does go to sleep when there is no activity for long time. Since I am using it as home server, it should stay awake all the time or at least wake up from sleep when there is incoming ping from other computer, but it just goes to sleep.
View 5 Replies View RelatedI did a bit of reading on the internet, and it looks like most computers will not boot into 32-bit mode by default with 10.6. It appears that if while booting the user holds the 6 and 4 keys, the computer will boot into 64-bit mode.
Does anyone know anything about this? Will the computer always boot into 64-bit mode if this is done once? Will it even make a difference? Will the average user want to do this?
I am unable to shut down my computer because the phrase 'no image capture device attached' shows and I cannot shut down image capture.
View 6 Replies View Related I have a macbook pro 13" early 2011 and I'm se as shown in the pictures (since i upgraded to os x yosemite) . It happens after display sleep or computer sleep on login not on boot up .I've noticed that i run out of ram when the problem appears (only 15MB RAM available out of 4GB), though i doesn't happen every time . I've talked to service and told me its either motherboard replacement or because the ram isn't enough (gpu shares with main ram) so maybe i should try upgrading ram. URL....
Info:
MacBook Pro, Mac OS X (10.6.8)
I have torrents going all the time. If the computer goes to sleep, the internet disconnects, so they stop. Display sleep wouldn't disconnect though. Is it OK to have computer sleep on "never" but keep display on "15 minutes"? I don't usually even leave the computer on overnight.
View 3 Replies View Relatedi have a little problem with the sleep light... i don't know when this started, but i notice today, that when i put my macbook pro to sleep, the light just stays on and not "pulsing" like it used to do... is that normal?
Info:
Macbook Pro 13, Mac OS X (10.5.8), 4 gb ram, 2.53 ghz intel core 2 duo
As of last night, my MBP started acting very strangely. After entering my username and password, it would enter the desktop for a short period of time and then kick back into sleep mode; the screen would turn back to black. Sometimes it will let me stay on the desktop for a long time and other times it will hardly let me stay on the desktop. I called apple support and they had me start the computer in safe mode; even then it occasionally kicks me out. The tech guy said that it was a "strange software issue" and not a hardware issue. I thought it was a hard drive issue; my hard drive makes an odd sound when it unlocks, but it has been doing that for quite some time with no issues. I tried to reset the SMC and it didn't do anything.
I am running OS X; not leopard or snow leopard. I know I need to upgrade, but this shouldn't be happening.
Second time since yesterday-My MacBook (White-2007) has been stuck in the sleep mode and the only way for me to get out of it was to force shutdown. (Pressed the power button for ~5 seconds.)
The white sleep light had stalled and was not blinking-Is this an indication of software problems, or that my harddrive is about to fail?
I have a Mac Pro and when I put it to sleep, it randomly starts itself back up-sometimes after 2 minutes and sometimes after 3 hours. I've tried repairing permissions, maintenance, etc. and have no clue as to what might be causing this.
View 6 Replies View RelatedMy parents just bought a new Imac (3.4 Ghz/I7) which is running 10.6.8. and we cannot figure out why it won't go to sleep automatically. In System Preferences/Engergy Saver we have set both the "computer sleep" and "display sleep" to about 5 minutes, but no matter what we do it keeps showig the screen saver and never goes to sleep. The "put hd to sleep" is checked, and the start screen saver is set to roughly the same amount... I have tried adjusting these settings, to no avail.
Info:
Mac OS, Mac OS X (10.6.7)
My 13" mbp will not sleep?
View 1 Replies View Related