Mac Pro :: Internal Hdd Missing Not Showing Up In DiskUtility Or System Profiler
May 15, 2010
I thought nothing of it until I started rebooting and STILL couldn't get the computer to see it.
I've tried the drive in all 4 of my internal bays and looked to see if shows up under BootCamp but no luck yet. My other internal drives work in any bay slot, so I don't think it's a fault with the MacPro.
As far as I know, it's spinning up and isn't making any dead-drive sounds I've heard in the past, it just seems to be invisible to the computer.
I just plugged headphones into the headphone port on my iMac(dual core 2.4) I went to system preferences, sound, then output and only the internal speakers show up. I rebooted the machine and still, same thing.
I tried the same headphones on the eMac sitting next to it, and it worked just fine. Still confused about the iMac
when I go to memory in system profiler for my mac pro it coms up with serial number manufacturer,pn,is this correct info?im having amnesia about this jsut want to clarify if this info always shows up
I was trying to get battery info so I was looking in "system profiler" and thought I might like it in the dock. However it appeared to be placed behind the dock on the desktop, so I just "right clicked" it and said move to trash. When I did that I decided to go see if I could find system profiler in my apps or whatever, and it was gone. So I went to trash and hit "put back." It went back into its original folder, but it also went back onto the desktop. How can I remove it from the desktop?
I am a new Mac owner and still wandering around in OSX, but I have a question. In System rofiler>Software>Applications, every application has 2 listings. Some have what looks to be a previous and new version, and some have both listed as the same version. Is this right? Why is this?
Someone else pointed out in another thread that on the 11" MBA with 4 GB, if you look in System Profiler under memory, the software says that there are two RAM slots. I can confirm that on my MBA. So:
1) Is the same true on the 13" with 4 GB RAM? 2) Has anyone published a tear down of a 4 GB model just to be absolutely sure that there is only one soldered RAM slot? (I know it's unlikely that a second one got crammed in there, but I'd just like to see the tear down picture)...
I got a camera, Nikon Coolpix S230, but It wont show up any where exept System Profiler, So I cant get the pictures off it. I am on a Early 08 Macbook on Snow leopard. Any?
I was just browsing through System Profiler yesterday and found a 'WWAN' option in the left menu bar. I've never seen this before, but could this be a suggestion that there will be built-in 3G in the future?
This could mean something else though, I'm not really familiar with WWAN capability.
When I log into my System Profiler, I see that I have three items listed to StartUp. These items I do not use.
Now when I go into System Preferences > Accounts > Login Items, these items are not listed.
When I go into my Library, StartupItems is not listed.
I've have run a search for StartupItems on the entire machine but it's not located anywhere. Does anyone have an idea on how I may remove these items from my Start up?
So just out of curiosity I was messing around in system profiler tonight and happened on the firewall tab. Never really took a look to see what it said until tonight. I have stealth mode enabled, and have ever since I installed SL but the profiler seems to think otherwise?
Just tried holding 6 & 4 on my mini during boot-up, it took a little longer to boot the first time (building cache?) and when I checked the system profiler, 64-bit was active!
this morning my iSight was working...and now, a few hours later it is not. is there anywhere i can go to look at this? i tried looking in the system profiler and didn't find anything.
I posted my G4 Powerbook on craigslist, and, after filtering out the nigerian scammers, I received some legit-seeming inquiries, a couple of which requested I print my system profiler information as a pdf and send to them so they could see how the machine is set up. One of them had an @apple.com email address, so it seemed like it was probably not a malicious request.
New member. Just got myself a new MacBook pro i5 15' to replace my old MacBook. I noticed when I opened the system profiler under ATA it said no hard drive was present or selected or something to that effect. Everything is running beautifully on the machine but I was just curious why nothing showed up. Any ideas?
I purchased a black MacBook (10.4.11) last may and it's my first Mac. Thus far, I have only had one problem and that is that my I can't see my Motorola Z6m in finder or disk utility (but it is in system profiler). I also do not see it in Terminal under /Volumes. Inside the phone is a 2GB Verbatim microSD card that works fine in my card reader on the same machine. On a side note, bluetooth works fine.
The phone works as expected in the PCs I've tried it in, including a parallels vm running XP on the MacBook (I don't have access to any other Macs) which led me to believe it was a formatting issue, but then the card shouldn't work in the card reader either and it should still show up in disk utitlity. Am I not correct?
I have tried rebooting, unplugging/replugging the device, removing the battery, and reinstalling OS X (I wanted to do it to get rid of Unsanity's APE anyways). I have plugged it into either port on the MacBook with the same result. I have also emailed motorola tech support. Additionally, I have done quite a bit of googling and have found other people with the same issue, but none of the suggestions have worked for me or were otherwise unworkable (some suggested downgrading to 10.4.9).
I have also heard of trying it in a powered usb hub, but the thing is, why does it work through the virtual machine if a powered hub is required? Or am I missing something in this?
Someone switched off the power to my iMac the other day. Since I've rebooted:a] System Profiler shows no awareness of FireWire ("Unable to list FireWire devices" in red) b] Every boot takes about five minutes, 3+ of which seems to be spent waiting for a response from the FireWire socket (the logs show a 3-minute gap followed by a line that goes something like this:"/usr/lib/exec/hidd: Timeout waiting for IOKit to be quiet") c] if it's idle long enough to go to sleep, it goes into a kernel panic (the last line in the log before the panic says"kernel[0]: IOPMSlotsMacRISC4::determineSleepSupport has canSleep true")b] looks connected to a], but I can't see any connection with c] (apart from the reference to IO).
Since two days ago, Wed Sept 9, my iMac's internal speakers aren't working.Checking the Sound Preferences, under Output, there is only Headphone. Internal Spkrs is missing.
4. The same machine when booted in Windows (via Bootcamp/CSM-BIOS) plays perfectly and shows Cirrus Logic devices and the HDA devices. This should eliminate hardware issues.
5. I have checked for the Optical Audio microswitch being stuck, but that does not seem to be the case.
6. This was used with Apple Headphones which also have the microphone built-in [URL] ....
IORegistryExplorer shows
Comparing it to another 13" Mid 2012 MBP which has working sound.
I have powerbook g4 with 2GB Kingston memory. So far I haven't experienced any hardware issues. However today I've noticed that all of a sudden 1GB has disappeared!! My Mac recognizes only 1GB! What might have happened?
I just replaced the internal hard drive on my G4 iBook. My problem is the drive is not showing up in Disk Utility, the system install disk, or when I have the iBook in target mode and connected to my tower. I believe the old drive had died. When I ran the Hardware Test on it, I received an error code on Mass Storage. After installing the new drive and running the Hardware Test, the Mass Storage passed. I take that as a good sign.?
Before cracking the iBook back open, I was wanting to find out what all the problem may be and what things to check while I have it open since that is not that quick of an operation. I'm already assuming to check the connections on the drive. But if they weren't secure, would it still pass the Hardware Test?
i woke up this morning and my western digital external HDD icon is not showing up on the desktop. I currently use this as a time machine and it has been working for about a year. This has happened before and just a simple re-plug of the usb does the trick, but i have been working on this for hours and for some reason it is not showing up. I have unplugged everything and re plugged them back in and nothing is working. i have checked the disk utility and the disk utility recognizes it. but i still dont know why it doesn't have an icon. i am running a repair disk on the external HDD now and it and it has been "repairing" for about 30 min now. i have tried to backup but it is not working either.
