I finally decided not to wait any longer to get the Mac Pro. I bought the base model and not I need to buy hard drives and ram. I have searched the posts and it looks like Seagate is the brand to go with but several post suggested the 7200.11 SATA Enterprise. When I googled it a class action lawsuit came up.
View 23 RepliesJust put a new Hard Drive into my Imac Dual Core. I Know I need to start up from the CD drive to format the disk... I am holding down the "C" key at startup but it isn't reading the drive.
View 3 Replies View RelatedI have a 15" MacBook Pro 5,1 2.53GHz Intel Core 2 DuoI believe this model would be called "unibody", but I have the early version with a removable battery. Can I fit a 12.5mm drive in there? I'm reading conflicting information in the forums.
I'm look at this drive. [URL]I'm assuming this is compatible with my laptop correct?
Starting today my 2010 Macbook Pro 2.66 GHz Core i7, OS X 10.7.3 (8 gigs ram) has experienced 4 "hard freezes" where the system locks up, itunes plays the same second of audio over and over, and nothing works (keyboard, trackpad, etc.. all frozen). You can't even make the caps lock key light up. This requires you to hold down the power button to reset. Obviously I'm very concerned that this is a hardware failure... or something is getting too hot. The thing is I'm not doing anything that crazy, no games or tons of programs open.
View 3 Replies View RelatedI see the numbers of everything from Core 2 Duo, to the slightly faster and cooler Core i3, to the supposedly faster core i5s and i7s. The benchmarks go up accordingly, but I found this does not always equate in a faster experience on most tasks.
Here's my experience so far on processor upgrade:
In one computer trade school re-certification class I am in, we are working with Windows Server 2003 on a Quad Xeon platform and it's incredibly slow.
But in a previous class we had the previous generation server edition on older Xeons, and while not fast, it was much better. On paper the newer multi-core Xeons should have made a difference, but could 2003 server software be that much more bloated than the previous Windows server edition that it would stall like that and make us wish we had the older setup?
I am going to try out the Adobe CS lab and put the new high end Dells to the test there and see if they work better than when we had an older CS version on older Xeon equipped Dells.
I don't know if this is something to do with Dell, or if Apple's increasing processor bumps/generations are going to similarly not make a difference in the speed things appear to go at, whether it's Adobe stuff, server stuff, or anything else that needs power.
I know somebody who plans on a Core 2 Duo, i5 or i7 MBP and I was wondering if the higher end processor is worth it in that case (iMovie being the main program of use).
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.Â
Info:
iMac (27-inch Mid 2011), iOS 5.1.1
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies View RelatedI have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
I know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies View RelatedI have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Info:
iMac
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies View RelatedRecently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies View RelatedMacbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
So my question is -- do you know if this would be an issue swapping drives from a 2009 Mac Pro to a 2010 running 10.6.5 on the drive? Is there an OS performance hit running the 10.6.5 from the 2009's drive on the 2010 Mac Pro?
The reason I ask is because I am upgrading to a 3.33GHz 6-core, it's ordered and on the way. When it comes, I would just like to swap my SSD from my 2009 to the 2010 (running 10.6.5) and hope that everything runs OK. I don't want to have to re-install the new OS X build from the system disks and then update it, I would like it just to work correctly on the new Mac Pro.
The optical drive of my macbook white core duo 1.83ghz has this problem that it wil keep on ejecting the DVD/CD.I know this has been asked,but can anybody suggest any troubleshooting?
I have a spare optical drive from my 15" macbook pro aluminum non unibody,will it be possible that i will replace it to my macbook white?
Just curious as to how much of an improvement in performance I would see upgrading my system as it states above, since my 2006 machine is 3 years old and getting close to the end of my apple care, figured I would trade it in and upgrade.
View 8 Replies View RelatedI do alot of photography with a canon dslr, I also plan to edit short HD videos as well as some photoshop and flash animation work.
Will I benefit greatly from the Quad Core Imac over the Dual Core Imac?
Has anyone that know if it's possible to upgrade MacPro Nehalem 2.26 to 2.66 Ghz Westmare with the following processors : Intel Hexa Core Xeon? Processor X5650 12M Cache, 2.66 GHz, 6.40 GT/s Intel? QPI part #:BX80614X5650 ? Could you help me telling if it?s possible to upgrading MacPro Nehalem octa core 2.26 Ghz to Mac Pro Westmare hexa core 2.66 Ghz ?
View 5 Replies View RelatedI have an opportunity to get a single 3.0 GHz quad core Clovertown.
Should I go for it? There's no advantage to having two cores in two sockets versus having four cores in one socket, right?
is it even possible to upgrade an old dual core powermac g5 to a quad core or even an 8 core.
I have a dual core one and i really need to upgrade to a quad or even 8 but it is so expensive to buy a whole brand new one and i was wondering if there was a way to just get a new processor and more ram or what not.
[URL]
What you say guys?
I know the same article is on main page
So the older Mac Pro's from 2008 have 2 2.8ghz Quad Core Intel Xeon processors, without hyperthreading, for a total of 8 cores, and the top of the line iMac has a Quar Core i7 2,8ghz with hyperthreading for a total of 8 (virtual) cores.
With the ghz being the same but less "real" cores, but probably newer CPU architecture, which CPU will actually be faster?
There's a lot of people wondering if the 13" MBPs would have been a lot better with a Core i3 processor, but everything has been just hangups over perceived old vs. new technology, and really the only thing the Core i3 adds is Hyper-Threading, but it doesn't have Turbo Boost, which helps the Core i5/i7s tremendously. Let's compare using Geekbench since it is cross-platform and one of the few available sources of info...
Core 2 Duo P8600 2.4GHz (~3362)
[URL]
vs.
Core i3 330m 2.13GHz (~3472)
[URL]
Core 2 Duo P8800 2.66GHz (~3700)
[URL]
vs.
Core i3 350m 2.26GHz (~3680)
[URL]
As you can see in both cases, the difference is pretty minimal indeed, and in single threaded applications, the C2D will easily outdo the Core i3 which lacks Turbo Boost and runs at lower clock rates.
And you get a 320M instead of Intel HD graphics with the new 13".
The Geekbench results from the old 15/17" to the new 15/17" are quite an order of magnitude better.
So unless people are expecting Core i5 processors in the 13", sticking to the C2D was actually a good decision, and given the differences between 2.4 and 2.53 isn't so large, one is far better buying the base 13" and then putting the money saved towards a good 7.2k HDD or SSD.
Note - I took averages of the 32-bit numbers and added them.
Note 2 - The C2D Pxxxx are 25W TDP processors, which are more efficient than the Core i3 which are 35W TDP processors. Less heat, better battery life from C2Ds.
I've been debating whether or not to upgrade my 3 year old 15" Macbook Pro that has a 2.2Ghz Core 2 Duo (Santa Rosa) to the new 13" 2.4Ghz Macbook Pro. FYI... My current system also has 4GB of RAM. Since both systems are Core 2 Duo, what kind of speed bump am I going to see? Would this be a substantial upgrade?
View 15 Replies View RelatedI'm buying a new MacBookPro but can't decide, due to lack of knowledge, wich one to choose and if there's a noticeble difference between,  15.4" MacBook Pro Notebook Computer 2.2GHz Intel Core i7 Quad-Core4GB of DDR3 RAM500GB 5400rpm Hard DriveAMD Radeon HD 6750M 512MB Graphics15.4" LED-Backlit Glossy Display1400 x 900 Native ResolutionSlot-Loading SuperDrive802.11a/b/g/n Wi-Fi, Bluetooth 2.1+EDRFaceTime HD Camera, Built-in MicrophoneMac OS X 10.7 Lion (64-bit)Â
and the   13.3" MacBook Pro Notebook Computer 2.8GHz Intel Core i7 Dual-Core8GB of DDR3 RAM (2x4GB)750GB 5400rpm Hard DriveIntel HD 3000 Graphics13.3" Glossy Widescreen Display1280 x 800 Native ResolutionSuperDrive, Secure Digital Card SlotFaceTime HD Camera, Omnidirectional Mic802.11n Wi-Fi, Bluetooth 2.1+EDRMac OS X 10.7 LionÂ
Besides the screen size, one would be considerable faster?
I use Photoshop and beeing a photographer I deal with large files.
Info:
MacBookPro 2.66GHz 4GB 1067MHz DDR3, Mac OS X (10.6.2)
The ivy bridge processors are coming out soon (or may already be out). I have heard that macbook pro 13" models might be able to use the new processers due to their lower energy useage. I presume that I will be able to take my mac to an apple store and have it installed. Is this information true?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
