I'm doing an initial back up on Time Machine. Is it O.K. to do an upgrade to Snow Leopard at the same time or do I have to stop the back up? Also, how do I know which files have been backed up?
Info:
Mac mini, Mac OS X (10.5.8)
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files.
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup.
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
Info:
MacBook Pro, Mac OS X (10.6.8)
I interrupted my initial Time Machine backup. How do I reinstate the initial backup?
Info:
Time Machine
So my friend got me Snow Leopard for Christmas and I want to upgrade my mac from Leopard to this but is there a way to upgrade without doing a clean install? Mainly because right now I have no external HDD. Only just two 2GB USB Drives which I already used to backup my pictures and documents. But if something goes wrong during the installation is there a way to go back to Leopard?
View 2 Replies View RelatedPosting for a friend who has just purchased Snow Leopard Box Set and wants to upgrade from Tiger. She was half way through the installation when she thought that Snow Leopard had not asked her to back up and she cancelled the installation half way through (not sure how, think she just turned off her Mac). She turned it back on but the only option it is giving her is too continue with the installation of Snow Leopard.
What she wants to know is will the erase all her data on her hard drive, or will she still have her files located in Documents/ Downloads etc when the installation is complete. I know when I upgraded from Leopard all these files were still present, I'm not so sure if it is the same with Tiger. Shes really worried about this as she has some valuable files in there.
I upgraded to Lion and cannot access my Quicken files. I understand that I have to go back to Snow Leopard to export the Quicken files, but I don't see how to restore Snow Leopard from Time Machine. Or, how to boot up directly to the external drive?
Info:
MacBook Pro, Mac OS X (10.7.3)
I've got an iMac with a 1TB harddrive and am trying to use a time machine set up to back up my harddrive. The external harddrive I'm using for my back up is also 1TB. I currently have about 135GB of free space on my iMac's harddrive and my external drive is completely empty. When I try to back up using time machine it tells me that the back up is 1.2TB and cannot fit on my 1TB external harddrive. What would cause the initial back up to be larger than the actual computers harddrive? Is there anything I can do to rectify this issue without me needing to purchase a larger external harddrive for back up?
Info:
iMac Intel Core 2 Duo, Mac OS X (10.6)
I have read the forums about how to reinstall from the initial snow leopard dvd, but my dvd is back home at the moment. Is there any other way to reinstall? I am in dire need of the free screen capture functions for a school project.
Info:
MacBook Pro, Mac OS X (10.6.7), 2.4 GHz Intel Core i5 4GB
I have an external HDD hooked up to my iMac. It's from Freecom, and I believe it contains a Seagate ST310005 disk. I formatted the disk, and set up Time Machine. It seems to go well, TM makes the first back-up without any problems. But, even though TM is turned on and set to back things up, nothing I put on my PC after the initial back-up gets backed up. I put a folder on my desktop, put some files in it, and they are nowhere to be found in the TM back-ups.
View 8 Replies View Relatedhow to keep my Tiger applications (relatively) functional when I upgrade to Leopard. I have Carbon Copy Cloner. The question(s) is/are:
1. If I make a selective backup, what folders other than Applications to I choose from my current Tiger HD?
2. Once I know which Folders to backup, can I save as a dmg?
3. If I can save as a dmg, how do I restore the Applications to the Leopard system without running into "issues."
I have one of the first Mac mini's. I upgraded the memory to 80 GB's, the processor is a 1.42 GHz PowerPC G4. I'm getting a new Mac Mini that will work in the iCloud. The software is version 10.5.8, the newest the processor can support. It works well, albeit a little slow at times. I want to give the old mini to my 12 year old grandson, and would like to upgrade the keyboard and mouse to the mac magic mouse and wireless keyboard.
Info:
Mac mini, Mac OS X (10.5.8), iPhone GS
My initial experiences with time machine were not great, glacially slow initial backup rate, left external HDD in unstable state that could not be repaired, stuck on "preparing" etc. The initial backup rate was minutes per Mb-unacceptable. Here are some steps I took, based on watching this and apple support discussion groups--this may not work for all problems being experienced. Turn off time machine Although TM doesn't require exclusive use of an external drive and will use HDs that have other data, you are placing those data at risk: Before you turn on TM backup anything you have on your intended time machine external disk, partition (as GUID) first, then erase (format as HFS extended, journaled) and check/repair permissions. (Don't let time machine format the disk)
- Exclude the external disk from spotlight indexing (or turn off spotlight altogether); certainly do not commence initial backup while spotlight is performing initial index after leopard install
- Turn off any virus checking!
- Remove TM plist file from any previous attempts and erase and trash any previous backup files
- Exclude any large frequently updated database files (Entourage, Parallels) from time machine.
If you have multiple drives that you don't intend including in your routine backup, make sure you exclude them in TM. Avoid daisy chained FW drives for the initial backup, time machine disk should be directly connected. That's about it, Time Machine backed up a ~90G system from a 2.4Ghz SR MBP to a LaCie 500G d2 (FW800) in about 120 minutes and has continued with hourly backups since.
How long should the initial backup for time machine take with FireWire 800 for about 120 gb
View 1 Replies View RelatedI've got two Macs: one Tiger (iLife '06), and one Leopard (iLife '08) and I would like to upgrade both to Snow Leopard. I'm in the UK.I need help finding the best price/capability compromiseI have looked at the prices for doing this and come up with the following options:Most expensive optionBuy the 5-user Mac Box Set (Including OS X Snow Leopard, iLife 09, iWork 09) for 179This way I've got both machines running the latest everything.Next OptionBuy the Single User Leopard box set (including iLife/iWork 09) to upgrade the Mini to Leopard (?108.34) then buy the Snow Leopard family upgrade box to upgrade both machines to Snow Leopard (?39), total ?147.34. This way I have iLife/iWork 09 on the MacMini but not the MacBook.
Cheapest OptionBuy the Single User Leopard disc to upgrade the Mini to Leopard (?68.99) then buy the Snow Leopard family upgrade box to upgrade both machines to Snow Leopard (?39), total ?107.99.
A while back I was asking about upgrading from OS X to Leopard. Well I never got round to it, so now I'm wondering if I should go straight to Snow Leopard.This is from the system profiler on my Mac.
Model Name:iMac
Model Identifier:iMac5,1
Processor Name:Intel Core 2 Duo
Processor Speed:2.16 GHz
Number Of Processors:1
Total Number Of Cores:2
L2 Cache (per processor):4 MB
Memory:1 GB
Bus Speed:667 MHz
Is this okay for changing to Snow Leopard?
It might be possible to use the $29 disc but is is legal?:
"The actual 10.6 EULA:
C. Leopard Upgrade Licenses. If you have purchased an Upgrade for Mac OS X Leopard license, then subject to the terms and conditions of this License, you are granted a limited non-exclusive license to install, use and run one (1) copy of the Apple Software on a single Apple-branded computer as long as that computer has a properly licensed copy of Mac OS X Leopard already installed on it. If you have purchased a Family Pack Upgrade for Mac OS X Leopard license, then subject to the terms and conditions of this License, you are granted a limited non-exclusive license to install, use and run one (1) copy of the Apple Software on up to a maximum of five (5) Apple-branded computers at a time as long as those computers are located in the same household (as defined above), are used by persons who occupy that same household, and each such computer has a properly licensed copy of Mac OS X Leopard already installed on it. The Family Pack Upgrade for Mac OS X Leopard License does not extend to business or commercial users.to the terms and conditions of this License, you are granted a limited non-exclusive license to install, use and run one (1) copy of the Apple Software on up to a maximum of five (5) Apple-branded computers at a time as long as those computers are located in the same household (as defined above), are used by persons who occupy that same household, and each such computer has a properly licensed copy of Mac OS X Leopard already installed on it. The Family Pack Upgrade for Mac OS X Leopard License does not extend to business or commercial users.
We are using Mac OS X Version 10.3.9 with a 1.25 GHz PowerPC G4 here and cannot upload the latest version of Safari, Skype, Quicktime 7, and are having difficulties with an airline booking website - probably because of the above. Would like to upgrade to Snow Leopard but this OS want us to have an Intel processor (think?) so not exactly sure if this is possibly because of the version of Mac processor we have.
View 4 Replies View RelatedI could use a bit of help updating my macbook from 10.4.11 to Snow Leopard. I have 10.4.11 and i'm updating to 10.6, Snow Leopard. I've already checked basic requirements, backed up and i'm ready to install.I chatted with a apple specialist when I purchased the dvd for snow leopard and asked if it was what i needed to upgrade all three of my macs; 2 running 10.5.8 and one running 10.4.11. They said yes. I had no trouble updating the machines running 10.5.8.But the one running 10.4.11 isn't so easy. The trouble is the install DVD will not boot and just shuts down the hard drives (the machine says 'restartto begin install' but when i restart the dvd spits out on restart). Does anyone know how to get the disk to install? Mounting the disk didnt work either, it allows me to begin the installation but then the machine reboots.
I'd done some research previously and was told by Apple that i needed to get the Box Set in order to upgrade my machine running 10.4.11. However according to apple's support forums url... the Snow Leopard upgrade should work. I just don't know if there are special steps.
Info:
MacBook, Mac OS X (10.5.6)
Any most cost effective way to upgrade from tiger to snow leopard after system crash.
Info:
iMac, iOS 4.3.3, After hard drive failed
considering a new macbook lion 10.7, can I upgrade my imac from snow leopard to lion
Info:
iMac, Mac OS X (10.6.8)
I am using Snow Leopard but am trying to upgrade to Lion. I went to the App store, clicked on Buy Lion, put in apple id, confirmed my billing info and clicked on Done. Nothing happened but it went back to the OS Lion page and the little gear wheel at the top of the page has been spinning ever since, been at least 15 minutes now. Is it downloading or is the wheel just spinning and I am wasting my time? I knew it would take some time to download, but I does that spinning wheel mean that is taking place?
Info:
MacBook, Mac OS X (10.6.8)
I need to upgrade from OS x 10.6.8 Snow Leopard to OS X Mavericks, and then to OS X Mavericks v10.9.3. Can I do that, and how on my MacBook Pro?
Info:
MacBook Pro, Mac OS X (10.6.8)
I have Leopard, the late edition of 09, or was it '08, in October? Anyhow, I am going tomorrow to upgrade to Snow Leopard mainly so that I can have iLife 11, but it is not compatible with Leopard. My question is this when I am installing the new stuff, do I need to go thru and delete anything at all??? Or do my things transfer over automatically? Also, will this new software, or is it hardware? will it take up more space on my Macbook or does it override Leopard, kind of take it's place and not take up more space on my computer? Yeah, I know, once again, lay(wo)man's terms and I know that I should know this stuff but I don't. I also do not have any external device backing up my stuff, which I know is a HUGE and COLOSSAL mistake. Is there an easy way to back stuff up, online or something? What about an inexpensive way? What do you all suggest for that, backing up, INEXPENSIVELY? Flash drives are out of the question for something of this measure, right? Discs also? I know nothing about this and I'm guessing that before I go installing Snow Leopard & iLife 11, that I need to consider this.
View 2 Replies View RelatedI just got my snow leopard disc in the door and I threw in the disc, selected the Macintosh HD partition and started installing. I didn't get an option to select either an "upgrade" or fresh install. Could someone please tell me if it's upgrading leopard to snowleopard or is it just installing a clean version of SL? It's currently on a screen where there's 55min left and it says "Installing" Should I press quit or just continue? I just wanna upgrade from leopard to SL. it's a full retail SL disc if that matters.
View 1 Replies View RelatedI have another user on our network with an administrator account on my MBP, who normally logs on remotely. After upgrading to 10.6 there's no remote access to their account. When I tried to access the account from the machine, I get into the account but everything is unresponsive and the only way out is to turn the computer off using the on/off button.
Things are getting a bit desperate!
My rev C. SSD runs beautifully, for hours and hours, usually without the fan on. Is there any reason for me to upgrade. This is my only computer, and I'm tempted by the old saying: If it ain't broke.
View 7 Replies View RelatedI have a 2007 mac pro running tiger currently. I'd like to upgrade to snow leopard, but I want to make sure that I'm not affecting the other drives on my computer. Currently I have all my apps on the main drive (the one that came from apple) and three other drives on the other bays. What is the best way of doing a fresh install without worrying about my other drives?
I was thinking of removing the three drives, do my upgrade and then slotting the drives back in, would my computer recognize these drives? Do I even have to take these drives out? I am also going to back up my main drive via super duper. If something happens during my upgrade, how can I clone my old drive data back?
Will I be able to upgrade to Mountain Lion straight from Snow Leopard, or will I have to buy Lion first?
Info:
MacBook Pro 2.5 Ghz., Mac OS X (10.6.8), 4 Gb of RAM
I have Snow Leopard installed on a partition on a Firewire HD, back when my MacBook Pro was also running SN. Since then I have upgraded to Lion. I recently tried to boot from the SN partition on the FW HD, only to get the 3 beep error (which I discovered later means the Mac can't boot from an earlier version than the current OS it's running...)
So, I would now like to upgrade the Firewire HD version of OSX from Snow Leopard to Lion [keeping the user folder in place, with docs, apps etc], but the installer says it can't be done. Do I have to erase the partition and do a clean install? It's pretty annoying if I do!
Info:
MacBook Pro 2.16Ghz Core2Duo 3Gb 15, Mac OS X (10.7), Firewire 800 1tb external disk
When I upgrade will I lose my mail and do I have to reinstall iLife and iWorks OR I will be able to transfer everything from my Time Machine Backup? Also, will my third party software not transfer over?
Info:
iMac, Mac OS X (10.6.4)
