I tried to install snow leopard on my 3 mos. old macbook pro and received a failure message with the invalid node structure, rebuilding catalog B-tree message.
Not sure what to do, I tried booting up from the leopard install disk and it took about 15 minutes to boot up and everything is wonky, doesn't work right.
I have recently installed new RAM and an SSD in my late 2009 MacBook Pro, running OS X 10.6.8, and it now frequently hangs when I try to start it up. Here are details:
In recent weeks I noticed signs that seemed to point to a failing hard drive. I took the machine to a Genius Bar. The genius tried Disk Utility and a quick diagnostic and could not reproduce an error, but he noted many, many I/O errors recorded in a log file.
He said I probably had a failing disk, but it might be a cable issue. He gave me two options: leave the machine with Apple overnight to run diagnostics and perhaps repair if the problem was confirmed, or just take a chance and replace the drive myself, for less money and less downtime.
I went to a local computer store, and the salesman there noted that I was using relatively little disk space. He suggested that I swap my failing 160 G disk for a smaller, 120G solid-state drive, which happened to be on sale. I agreed and also bought some new RAM.
I installed the drive and RAM, partitioned the disk (with HFS journaling), and restored my files with Time Machine. For that day and the next, everything worked perfectly.
The second day after the installation, the system hung while starting up. The Apple logo appeared, the gray spinner appeared, and it just spun. I tried resetting PRAM. I tried safe restart. I started up from the install disk and ran Disk Utility: no problems found. I repaired permissions. I took out the new RAM and put back the old. In some cases after trying these steps, the system booted fine — once. In others, it would not boot the first time, but would boot on the second or third attempt. I reinstalled OS X and updated software. The problem persisted. I installed some freeware to enable trimming the new disk. No better.
I have booted many times in verbose mode. During the unsuccessful boots, there is usually a message "Bug: launchctl.c: 3557 (23930):6 ioctl(S6, SIO CAIFADOR_IN6, &ifra6) ! = -1". The next line is the command "fsck_hfs", and the machine hangs. Eventually it sometimes spits out "launchctl: please convert the following to launchd: /etc/mach_init.d/dashboardadvisory.plist". If I let it go for a long time, I sometimes come back to find a long string of I/O error messages, to the effect that media was expect to be there but wasn’t. I think every time I have gotten the launchctl message, it has booted successfully on the next try.
During the successful boots in verbose mode, everything happens so quickly that it is hard to say what is going on, but I don’t think it is running fsck_hfs. If it boots successfully and I give it a heavy I/O task, like doing a virus scan, everything works fine. If I run Disk Utility off the installation disk, it says the disk appears to be OK.
I started the machine in single user mode and ran fsck manually. It gave me reports similar to running Disk Utility, and told me the disk appeared to be OK. It then gave me the prompt for a new command. I typed "exit". It responded "logout". And hung.
One last thing: I just tried a couple of times to restart with the Apple Hardware test. Despite holding down the D key, the test failed to load, and after a long pause, the machine attempted a normal start-up.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have a MacBook 13" 2.0 GHz with 1 GB Ram and a 80GB harddrive 2006 model. This machine recognizes all ram, DVD, Hard Drive and ng usb etc. seems to work perfectly. BUT, it will only startup if I HOLD the PowerButton down all the way down until I see the the Apple Logo. If I just hit the powerbutton and go, it will t reboot over and over and over. I have bought new ram, nope. I tried a different HD, nope. I disconnected the DVD, nope. It simply won't boot properly. Once I HOLD down the power button to get it running it works fine, sees the camera, BT, WIFI, clock is at right time, all keys on KB work, and usb peripherials. I cannot reset the pram or vram at all, even while holding the power button down to boot. If I just hit the button and quickly press Command option p r it just reboots like always. Does anyone have any ideas??? I'm at a loss as it works fine once booted. While holding the power button to boot it I see my front led flashing and then hear the several beeps and it starts up just fine.
I have pulled the battery, removed the PSU, held the power button for a whole minute battery or power and let it sit overnight like this but nada, still does this.
I have a tower Mac Pro with Snow Leopard running on it.Unfortunately one of the software that I use doesn't have yet a Snow Leopard update. So I am thinking maybe I can install older version of Leopard on one of the internal drives (i have 3 additional internal drives), so I can boot my computer from either Leopard or Snow Leopard, depending on needs (i don't want to get rid of Snow Leopard).
I never installed OS X system before, so I am a bit scared.The internal drive is ready, I have the old Leopard on disks, what are the next steps to take?
It just hangs at the spinning pinwheel. I shut the machine off and booted it into Verbose-mode (Command-V) and it stops at "Initializing Power Manager" or something very early on. I pulled the battery and unplugged the machine, am letting it cool off (not that there's a point) -- it's one of the original MacBooks that had that "shutoff" problem with the wire that'd melt and short to the heatsink but mine never had the issue because I wasn't using it very often at the time. Any ideas? The drive does show up when I hold down Option.
View 24 Replies View Relatedwith my Leopard installation i have a problem where it fails to boot up likely due to a previous unexpected power cut.
From googling the issue it seems like the only solution anyone has had to the same problem is to re-install.
However I've lost my Leopard system discs.
I booted into my Bootcamp Windows installation and installed the latest drivers from the Snow Leopard disc which i recently purchased (and came today)
This gave me the option to read files (and presumably copy) from the mac partition but no delete function.
I have two problems here:
1. I only have 2.61GB free on the mac partition, Snow Leopard requires at least 5GB. Since I can't boot into OS X and Windows can't write to the partition i can't delete any files.
2. My mac won't boot the Snow Leopard DVD for installation. I hold C while booting and it has no effect. It does however run the Hardware test if i hold D while booting.
I have an external drive i could probaly make enough room on to back up my entire osx partition for a totally clean re-install.
However this requires some sort of access to the drive/write capabilities. Maybe something like bootable linux?
And any idea why my disc won't boot? (even if i had enough space for a install...that would be a bit pointless if i can't get the disc to boot)
My hard drive recently crashed. I just bought a new one and installed it myself. Now it's simply a matter of reinstalling the operating system, which is where I'm having trouble. I insert the Snow Leopard Install DVD into the drive. I power on the computer and hold 'C' (I've tried Option too) to boot from the disc, but it doesn't work. It spits out the disc after a few seconds, whether I hold 'C' or not, and then it gives me a folder icon with a question mark in it in the center of the screen, the same thing it showed when my hard drive first crashed.
Info:
MacBook, Mac OS X (10.5.8)
I cannot find Boot Camp 3.0 on my Mac. I just upgraded to SL and it seems like it disappeared. A search in Spotlight returned nothing.
View 4 Replies View RelatedMacbook Pro won't boot. Symptoms preceding failure included failure to open Firefox. When trying to cold boot I can get as far as the start-up sound, the Apple logo, and the spinning whieel (spins for a bit but not for very long) and then major failure. Not running Liom.
Info:
imac 10.1, Mac OS X (10.6.2), also have macbook pro running os 10.5
Why do I get a "plug in failure" while trying to view some internet based charts such as MSN Money stock charts?
Info:iMac, Mac OS X (10.6.8)
My 2.33GHz C2D MacBook Pro running 10.6.3 has suddenly decided it doesn't have an optical drive installed!
If I put a CD or DVD in the drive it will pull it in, spin but fail to recognise the disc. It is impossible to eject the inserted disc by any means - except by using a piece of cardboard to stop it spinning after a restart. I have tried data, audio and video CDs/DVDs.
System Profiler says I only have a hard drive attached to Serial-ATA and have no Disc Burning devices installed.
Has the optical drive failed? If so why does it still spin up if the computer doesn't know the drive is there? Does the fault lie elsewhere?
I'm going to be upgrading my powerbook G4. I have an external 750 hard drive that is up to date with my system. What I would like to know is, should I do a clean install to Leopard(can't go snow leopard.no intel. right?)and later add my pictures & music back from backup? And what is the best way to do that. I also am adding 1 g to the 512. I'm thinking I'm not going full memory for now. I'm just trying to make this wonderful laptop a few more yrs. Please can anybody tell me how you upgraded and why.
:unsure:
Machine Name: PowerBook G4 17"
Machine Model: PowerBook5,5
CPU Type: PowerPC G4 (1.1)
Number Of CPUs: 1
My 15" MacBook Pro has been randomly shutting down. I ran Apple Hardware Tools, but it found nothing. So, I ran TechTool Pro 5.0.6 and discovered a SMART drive failure. On the 'Temperature Changes' test, the black indicator is all the way to the right. What does this mean? What do I need to do?
View 2 Replies View RelatedMy time machine backup failed last night. Tells me that disc cannot be repaired and to backup and reformat. But it wont let me copy anything off the disc it tells me that the operation cannot be completed due to the ownership of the volume not being set. I have tried changing the sharing and permissions but its permanently greyed out.
Info:
Mac OS X (10.6.7)
o I took the plunge and giddily purchased Mac OS 10.6 aka Snow Leopard the day it was made available. Usually, I have very little worries being an early adopter to new OS releases considering the successful upgrade experiences I've had through the years of being a Mac user.
After upgrading to Snow Leopard from 10.5.8, my MacBook Pro 17" (2.6 GHz, 4GB RAM, 200GB @7200 RPM HDD, non-unibody) would consistently drop it's internet connection whether it was via Ethernet (wired) or through AirPort (wired and wireless are using DHCP). I've applied several supposed fixes suggested everywhere on the Googled web with limited success:* Reset Network settings, deleted "Automatic" settings and created a new setting (called untitled)
* Zap the PRAM (hold Command+Option+P+R on restart)
* Flush the DNS cache(using: dscacheutil -flushcache on the Terminal)
These 'fixes' worked only for a few minutes, and the internet connection would eventually drop again. NOTE: Although other computers and drives were visible on my network, and Instant Messaging via Adium is still functional, which is weird, I could not connect to the internet through a browser, or connect Mail.app or even to the iTunes store.
Tired and frustrated at this point, I decided to finally call Apple Support (Case #134733179) and was suggested to try the following steps:* Shutdown the MacBook Pro, remove battery, disconnect the power, and then hold the Power Key for 15 seconds. After which I was told to replace the battery, reconnect power and zap PRAM and wait for 2 chimes before letting the keys go.
I was able to get connection for a while but lost it again after a few minutes of usability.And so I called again and was told this time to try:* Trash the SystemConfiguration folder (~/Library/Preferences/SystemConfiguration) and all of it's contents... then reboot.
The above suggestion seemed logical as it would obliterate any existing preferences that may be corrupted and affecting the connection setup. The system would then recreate a fresh preference file free of any lingering old settings. This again worked for a while, but sadly, my wired and wireless connection both drops within a few minutes of usage. It is also worth noting that simply restarting the MacBook Pro regains connectivity as well but drops after a few minutes on both Ethernet and Airport settings.
So today has been an unproductive day considering I spent all my efforts troubleshooting Snow Leopard (10.6) on the MacBook Pro, and couple that with the inability to use several key functionality such as SynergyKM to sync all three machines I have with one keyboard/mouse (not to mention the unpredictable behavior Adobe CS3 has been displaying (especially InDesign losing menus and drawing blank palettes!) and the loss of Letterbox's (plugin) features on Mail.app) and I am now forced to downgrade back to 10.5.8 via Time Machine Restore until Apple resolves or acknowledges this problem (or some knowledgable individual throws this dog a bone and help me out of this misery).In the meantime, I need to get work done and something as fundamental as a stable internet connection should have been high on Apple's "must work" priority list.
I have a macbook 2,1, the white one. Has anyone else had their regular built in sound just stop working right after upgrading to snow leopard? I can get sound to play through headphones, but once I up plug them the little sound icon in the menu bar will grey out and I will not be able to get sound to play through the internal speakers.
If I go to the Sys Pref > Sound > Output Pane, it will say "The selected device has no output controls" in the Settings for Selected Device section.
I upgraded my girlfriends laptop to Snow Leopard even though she could care less. Now she's all mad cause the sound doesn't work.
Yesterday my screen (30" Apple Cinema) started showing symptoms of graphics card failure, jagged lines across the screen. I rebooted my Mac Pro and it was gone. Then it happened again an hour later, this time the machine didn't boot, I get the Apple logo, and then it hangs up and the screen is shifted to left (I get apple logo on left side of the monitor instead of the middle) and jagged lines all over.
So the first thing I tested was using Target Disk Mode, it works. I can access my Mac Pro's internal HD's by TDM from my MacBook Pro. Then I tested single user mode, it does boot, I can't read what's written since the screen is shifted to left, but if I type (without seeing) reboot and hit enter, it reboots. So I assume the single user mode is working.
What else can I try to 100% make sure it's my graphics card that failed and everything else is ok with Mac Pro? I already ordered a graphics card replacement but I wouldn't like to be surprised if the Mac Pro still doesn't boot when the card arrives. It won't boot from Apple Startup DVD either. Same thing happens, gray logo then kernel panic with jagged lines all across the shifted screen.
Yesterday my screen (30" Apple Cinema) started showing symptoms of graphics card failure, jagged lines across the screen. I rebooted my Mac Pro and it was gone. Then it happened again an hour later, this time the machine didn't boot, I get the Apple logo, and then it hangs up and the screen is shifted to left (I get apple logo on left side of the monitor instead of the middle) and jagged lines all over.
So the first thing I tested was using Target Disk Mode, it works. I can access my Mac Pro's internal HD's by TDM from my MacBook Pro. Then I tested single user mode, it does boot, I can't read what's written since the screen is shifted to left, but if I type (without seeing) reboot and hit enter, it reboots. So I assume the single user mode is working.
What else can I try to 100% make sure it's my graphics card that failed and everything else is ok with Mac Pro? I already ordered a graphics card replacement but I wouldn't like to be surprised if the Mac Pro still doesn't boot when the card arrives.
P.S. It won't boot from Apple Startup DVD either. Same thing happens, gray logo then kernel panic with jagged lines all across the shifted screen.
Question in the title - just wondering if I will need to upgrade to Leopard before Snow Leopard.
View 3 Replies View RelatedHey peeps. I got my retail copy of Snow Leopard. Unfortunately, my Super Drive seems to not read Dual layered DVD's (including Snow Leopard, my regular Leopard, etc) Is there a way I can install booting from a USB drive? Or a Firewire drive?
View 2 Replies View RelatedIm having a few problems with my new instal of snow leopard
1. When ever i shut my mac down and restart it says insert a bootable disk, i have to then restart again and hold down, the alt button and manualy select the macintosh hd
2. Time machine is taking longer o backup, and icon on the menu bar is always grey and not black.
3. system is running extremely slow
Well in my quest to upgrade my MBP 5,1 I got my memory and a 500 GB Seagate Momentus XT from Newegg. I'm enjoying 4 GB of RAM now. So, I'm debating with myself about what to do. Obviously, a new HDD is a great opportunity to install Snow Leopard and start from a clean slate. Or I was thinking about cloning my current Leopard install to an external HDD with CCC, but I'm having trouble understanding how I would accomplish getting it back. I'm thinking you can do this by booting from the install disc, but I'm not sure. So, if I go the SL route, will I be able to use Migration Assistant and an external enclosure (if anyone could recommend one, that would be great!) for the old boot drive to move my important stuff over?
View 9 Replies View RelatedI have a MacBook Pro running 10.6 and a Mac Pro running 10.5.8.
Can I install 10.6 on the Mac Pro from the Installation DVD that came with the laptop or does Apple require me to buy the software twice?
Info:
Logic Pro, Mac OS X (10.5.8), Mac Pro 8 core/ Apogee Rosetta 800
Some weeks ago I accidentally deleted the app x11 from my iMac (I have the version 10.6.8). Now I am trying to install a game that needs that app. I've tried to download and re-install the x11 from the Apple website, but when I'm installing it, a message shows up saying that "x11 can't be installed. a more recent version of this software is already installed". but that's impossible, since I deleted it! I've been looking through my iMac with the Finder and the app x11 doesn't show up, so it is definitely not in my computer. What can I do to install the x11 in my iMac again? I don't think it's possible that the app still remains in my computer.
Info:
iMac, Mac OS X (10.6.8)
I'm trying to install Mac OS X Snow Leopard on to my macbook but I keep getting this error.
"mac os x installation couldn't be completed" I get this message usually within 5 minutes of installation.
My macbook specs are...
Mac OS X Version 10.5.8, 2.16 GHz Intel Core 2 Duo, 1 GB 667 Mhz DDR2 SDRAM
I've already tried repairing the disks. (I repaired my leopard with the snow leopard CD because I couldn't find the leopard CD.
I heard it was fine to do.) I would have tried to verify and repair the partition but the buttons seemed to be grayed out for some reason.
Here is the error log...
[URL]
(sorry for the download, forum rules. "the text that you have entered is too long (123483 characters). Please shorten it to 20000 characters long.")
Will it install like the OS does on the iPhone, as in the existing data isn't put in a new folder? What exactly happens when you install a new OSX?
View 1 Replies View RelatedAfter 5 years with 10.3.9 on an iBook, I've bitten the bullet and bought one of the new iMacs. The transfer has gone fairly well, but I'm having trouble moving my address book and keychain data across to the new machine.
They didn't come across using the Migration Assistant: the Snow Leopard Keychain won't accept anything exported from the Panther version. If I export the address book as V-cards from the old system (the only means of export, the new systems asks me whether I really want to import n cards, but after I say yes nothing appears in the bbok.
It's al very frustrating, (and not very Apple-like!) I'm on the verge of doing the whole thing manually, one address and one keychain entry at a time, which seems quite daft.
I just replaced the hardrive in one of my macbooks. i am trying to load snow leopard on it and it just skips through the installation and says Intallion failed?
anyone have any thoughts. i am installng it from an external harddrive!
I've read it is possible to partition your hard drive so you can have leopard and snow leopard installed at the same time on one computer, correct?Can I partition my current drive without having to reinstall leopard? or lose any data? I will of course have a back up but is it possible to create another partition if I have room while keeping my leopard install intact?If later I decide I love (or hate) snow leopard can I get rid of the other partition and expand one of the partitions to take up the entire hard drive (like how I have it now) again without reinstalling or losing data? (on the partition I intend to keep not the one i get rid of obviously)
View 6 Replies View RelatedI am in a library and have my disc to upgrade to Snow Leopard. I want to do it now while I'm reading, but I'm afraid maybe there's some sound effect that will happen when the installation is complete (like there was when I booted up my macbook for the first time). I have the volume set to mute--will it stay on mute?
View 1 Replies View Related