I have a MacBook intel 2.1GHz with 1Gb RAM running 10.6.4 Everything is working fine except that the DVD player quite frequently makes a sound as if it is trying to load a disc, this happens every few hours and when there is no disc anywhere near to it. I have run the usual checks of permissions and an HD check with no reported errors.
View 2 RepliesLet me preface this by saying I am probably taking this to the Apple Store about an hour away from where I live tomorrow. For A while my MacBook Pro 13" has been making a loud spinning/grinding noise on occasion. Normally, I'd just shut down, boot up, and it would be fixed. Well, yesterday, that didn't work. After being told by the support guy that my free phone support expired 14 days ago (Mac bought in June), he said he'd do what he could to help. I told him about the noise and held the phone up to it (it is coming from the right of the trackpad). He said he had never heard that before and said to take it in to the Apple Store. I've found an Apple Support article, but it doesn't shed a lot of light on the situation.
View 7 Replies View RelatedI love InterVideo; however, they don't appear to make a model for MACs. Therefore, I'd like to hear your recommendations from best and what to avoid.
View 6 Replies View RelatedI just got my 2.0ghz Alu Macbook a few days ago and everything works perfectly well, the thing is that after day one the magsafe started to emit a low pitched electrical whistling noise. It tends to be there a few minutes after booting into the OS and then it turns down to almost unhearable, but I experienced it returning after a few hours of use and then disappearing again. If I move close to the escape key I can hear a crackling noise emitting from the magsafe.I'm not trying to be overly nitpicky or anything but I read somewhere that if it's doing that it would be a faulty Mag-Safe board or something.
Does any one you guys know anything about this? I have the 14 days to return it as I bought it online from the Apple Store so if it's a faulty part that might die/break/ cause problems later I might have to.
Sometimes I lift and carefully move my 17-inch MBP a short distance to another flat surface without putting it to sleep mode, it starts making really loud mechanical noise when I put it down, so loud that people in the same room can hear the noise and I can feel vibrations too! What causes this? Where does this noise come from? Is my MBP defective?
View 3 Replies View RelatedMy first generation unibody Macbook hasn't had any problems to this date but now it's constantly making that mechanical loading-like noise which is usually heard when the Macbook is switched on (the noise before the start up sound) or when the lid is opened to wake up the computer. Is there a fix to this?
View 5 Replies View RelatedOn my 13" MacBook Pro, the hinge makes a cracking noise on the right side of the computer (near the power button) when the screen is positioned all the way back.The entire hinge also makes a loud popping noise when I adjust the screen position. The screen seems very tight, and it takes a little bit of effort to move the screen, and when the screen is moved it makes the loud popping noise.
This is probably going to make some of you guys cringe, but sometimes putting pressure down on the top of the case close to where the black hinge meets to unibody enclosure seems to stop the popping noises. Putting downwards pressure on the hinge, or flipping the computer over and putting pressure on it that way, also seems to alter how much popping noise there is.
If I mess around a bit with applying pressure on different parts of the computer around the hinge, I can usually eliminate the noise. But, the cracking noise when I put the screen all the way back is still there.Any ideas what to do? It's not interfering with the operation of the computer, it's just incredibly annoying and this is only a four month old machine which shouldn't be creaking and cracking already.
Has anyone else had problems with an old G3 Pismo making an annoying squealing noise when plugged into a charger? There's a lot of noises mentioned in mac/apple forums but none of them relate to this one. Here's what it is not:
It's not coming from the screen or the fan or the speakers (it's under the keyboard). It's not low or slightly annoying (it is a loud squeal). It happens only when the power adaptor is plugged into the laptop.(it used to cease after I unplugged the power adaptor and plugged it back in three times; now that solution doesn't stop the noise anymore). It charges ok, and runs ok, scream or no-scream. It's quiet right now, but if I move the adaptor to another plug it will start again.
I was going to live with this, but today after an hour of operating quietly it just started again, and I hate to leave the house with this going.(it will scream whether the laptop is on or off. I have a really old battery and cannot replace it (I am currently staying in Mexico for the summer). Battery life is 45 min. I haven't tried pulling the battery out. That would be too easy.
This all started when I bought a replacement power adaptor (generic),after the original one melted down, but I could stop the screaming by unplugging/plugging it in again once or twice. Then I bought an expensive iGo adaptor, and it does the same thing.
I Did the PRAM and PMU reset.I can hear it over music or the tv. It grew lower in pitch today after squealing for a half hour. I'd normally not let it go on that long, but i was
in the other room.Is my PISMO dying?
(400 mhz pismo G3 500 sdram, osx-10.39, no os-9 or Classic, new 80g HD)
I'm new to this forum and I just bought a new iMac 20" 2.66GHz, I turned on my computer and noticed a weird sound (buzzing or humming noise) not loud but loud enough to here I notice when I messed with the Brightness it went away is there something wrong with that or is that a known issue?
View 16 Replies View RelatedI just got my macbook pro yesterday and ran it all yesterday not hearing anything. Today when I woke it from sleep I could clearly hear the fan or hard drive going. I was in a quiet room and it's quite annoying.
istat says its at 2000 rpm so thats when I started thinking it may be the hard disk. It does pulse every now and then but thats even while it's just sitting idle.
I guess I could live with it but its just annoying. Anyone else having this?
have in the past few weeks uprgraded from tiger to leopard.Everything has been ok but i think i might have deleted some vital part of Quicktime player when i tried to clean up.I only realised this when i decided to get Quicktime player pro which i have paid for and have the key..I have tried to download quicktime from apple support website and just about any other website for that matter but zero.zilch.Installer takes me through the process but i get no player.
I have tried to remove all components of quicktime but to no avail.the download intalls but goes nowhere.Have tried to maybe 'jumpstart' it by double clicking quicktime time movies but there is just nothing going on.
Model Name:PowerBook G4 15"
Model Identifier:PowerBook5,8
Processor Name:PowerPC G4 (1.5)
Processor Speed:1.67 GHz
Number Of CPUs:1
L2 Cache (per CPU):512 KB
Memory:2 GB
Bus Speed:167 MHz
Boot ROM Version:4.9.5f3
Digital movies play just fine on my camera, a NIkon Coolpix but once I import them to either quicktime or windows media player they do not play smoothly. Any ideas why or what I can do to correct this?
Info:
quicktime or windows media player , Windows XP, camera digital films won't play
Is there a way to make another player as a default instead of Quick Time Player? It seems like the player doesn't support international dramas.
Info:Mac mini, 2011 iMac O.S.
I successfully installed Adobe flash player. Latest version. How do I set this as my default player application?
The websites I use just keep saying to install the flash player.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have the new Macbook with Snow Leopard. How do I get DVD Player back? I put the applications disc in and DVD Player didn't show up...
Also I have the OS X disc but I don't want to reinstall my OS and wipe all my data.
So how do I get DVD Player back?
I have had my Macbook for a month and a half and so far I love it, except one minor issue. My AirPort card is off when initially boot into OS X. I don't have a problem turning it on I just need to input my WEP key every time. This is a little frustrating, especially when the folks at Apple are clueless. I have all my software updated to 105.7.
View 1 Replies View Relatedi have a 2007 15" mbp that woke me up this morning trying to boot up. here's the story: last night after watching a couple comedy channel shows, i shutdown my machine and left it plugged in the wall to recharge. it sat atop my dresser, with the lid closed. i awoke to the boot-up chime and a bright light spilling out of the 2 mm screen/body crack. the machine then rapidly shutoff and repeated this two or three more times more without me intervening --it's possessed!! after a couple hours of investigating the problem, i'm now completely lost on what to do. i've read all the apple support pages, and tried all their suggestions including reformatting PRAM and SMC. however, nothing worked.
here are the facts: - when i press the power button without the power cord attached--i.e. using just the battery--the chime sounds, hard disk (i think) makes its typical sound, the screen turns grayish-white....but....then, i hear a zzzzpp sound from the top left of the body (under the left speaker) and the boot up immediately fails.
- here's the kicker--when i press the power button with the power cord attached, and with or without the battery inserted = nothing happens; however, if i detach, then reattach the power cord, my mbp automatically boots as described above without me touching the power button.
- my battery is fully charged
- i've tried another power cord and battery...same pattern as above
I know that using the DVI to VGA device, one can get their mac picture to show up on TV, but is there any way to also hook sound up from mac into TVs?
I have some TV shows I've bought on iTunes that aren't on DVD and I'd like to watch them on my TV. Is there an all-in-one picture AND sound method to get my mac to play video on my TV?
i have just started my phd and am looking for a portable laptop. my requirements are pretty basic - lots of word processing, music, movies, and of course internet. maybe some photo editing. now first, i am a little mixed up if i should go for the macbook pro (basic 13 inch) or the newly launched macbook air (13 inch basic). pro is more powerful and cheaper than air. but then air is lighter and also has the faster flash memory! on the other hand, i am tempted to go for an SSD option with the pro. the price goes up of course by 315 $ or so. but in a way then the system could last me for a very long time given that the new polymer batteries last 3 times than normal ones. and its really the batteries/HDD that get worn out first.
on the other hand i am a little wary of SSD technology. it seems that the old HDD's are not that bad, and have some advantages over the SSD's. an internet search reveals that the 1st generation SSD's had a lot of problems. so does apple now use 1st generation ones or newer ones? moreover, is the SSD option more reliable or the flash drive one (with air)? basically am ready to invest a big amount provided i am assured that the system will last me for a long time to come.
I use a macbook for many years now, and I wanted to re-install my OS, so I plus my macbook and my pc with firewire and use the mode target. Already do it and work fine but this time the only drive I see it's the dvd player of my mac... Someone have a idea?
macbook
2Ghz Intel Core duo
512 Mo 667Mhz DDR2
Mac OS X
10.4.11
I have 2 laptops that i can use for running hackintosh. One is a Asus Eee PC 1000HD 10'. The other is a Hp Pavillion dv9700. Is it even possible to run hackintosh on these systems? I tried once and messed my boot data and had to restore.
View 5 Replies View RelatedI have a problem with my Powerbook g3, the display seems to be crapped out and not functioning. I tried hooking up an extrenal monitor. DVI - VGA.
The monitor received no signal. The only other option is s-video, but i'm afraid that the video port is just shot, hence the no signal from the monitor.
I have a program that only runs on that computer.
Is there anyway to link up a macbook pro to the powerbook, and use the macbook pro monitor for the use of the powerbook, so I can run the program.
I have a Powerbook G4 that I bought used a year ago. It has worked perfectly with no problems at all. Yesterday it started going to sleep randomly during use. It would wake up when the space bar is pressed and be fine for a while. This was happening every 10 - 15 minutes. Since yesterday it has gotten worse and worse, happening more and more often, and now it won't even stay awake long enough to click on something. Any ideas of what could be wrong??? I'm sorry I don't know what operating system or anything, I'm not all that Mac savvy.
View 1 Replies View Relatedfor all running out of space,I have replaced the Harddrive on my macbook air Prozessortyp:Intel Core 2 Du Prozessorgeschwindigkeit:1.8 GH Anzahl der Prozessoren:1Gesamtzahl der Kerne:2L2-Cache:4 MBSpeicher:2 GBBusgeschwindigkeit:800 MHzthe sparepart Hard Drive i used
View 1 Replies View RelatedI have a MacBook Pro that is approximately 2 years old. It has always worked fine without any issues at all. Tonight I was installing some scanner software for a Fujitsu S300M scanner. After installing the software it asked me to reboot so I had reboot. At that time I came back a minute later to see just a black screen. I then after a couple more minutes decided to hold down the power button and turn off the power since nothing was happening.
I then pressed the button again and I saw the light turn on on the button that opens the screen but that is all. There was no startup chime, nothing. All I could hear is at the same time the light came on the optical drive makes it's noise that it makes at bootup. I have tried repeatly to start the computer. I have pulled both the AC Power and Battery for several minutes with still no luck. As I said just the light comes on and the optical drive makes noise and that's it, no startup chime, nothing. I don't think this should be related to scanner software and I'm assuming it was a coincidence that it happened then but any idea what could be causing this and can I fix it without a trip to the genius bar?
Last night my mac pro was freezed when I was using some softwares and I powered off the pc by holding down the power button.(force quit didn't work) after then my mac became super slow whatever during starting up and opening applications. I wanted to use the hardware detection by holding down the "D" key during start up but it does't work as well.
Actually what is going on on my mac, is it the hard drive problem?
I have a macbook pro 17" 2.4GHz (non unibody). I accidentally applied 220 VAC to DC adaptor terminals and burned the logic board (and also the fuse on the left I/O board).
There were no visible damage on the logic board so I assumed only power input stages could have burned and started to investigate. I removed the battery charger IC, some burned mosfets; and I connected the adaptor plus input to the output of the battery charger block. So the DC/DC converters are now powered from the adapter, as in normal operation. Only difference is that there is no battery or charger stuff.
Now, when I press the power button nothing happens. If I connect the adaptor while pressing the power button, hold it for a while, release it, and press it again, it powers up. (Is this MCEverything from hdd to dvd to fans powers up but not the LCD. Fans start and remain running at full speed. Harddisk powers up but there are no noticable reads. That is, no os boot attempted. The mbp draws around 1.5 A to 1.75 A at 18.5 VDC(not sure if it indicates anything).
I'll do whatever I can to fix my board. I have MSc in electronics, skilled technician friends, and access to lots of tools, parts, and measurement devices.
Had to get a new hard drive.Only place I have photos is on my iphone(not the roll)but on iphoto. How do I back them or restore to my new drive?
View 1 Replies View RelatedIs it OK to use two different size ram sticks if they are the same type/speed?
Say I wanted to fit a 1gb and a 2gb stick into my macbook, but both were 667MHz DDR2, would that cause harm to my system?
I have an aging mac. (macbook pro 15.4" core duo (2006)) I would like ot breath life into the machine by upgrading the ram. I am thinking of upgrading to 2 gigs from 1. What kind of a performance upgrade am I going to see?
View 3 Replies View Related