Intel Mac :: Fully Mirror (like With A Cable) To The TV Wirelessly?
Feb 10, 2012if I can fully mirror (like with a cable) my Imac to the TV wirelessly?
Info:
iMac
if I can fully mirror (like with a cable) my Imac to the TV wirelessly?
Info:
iMac
I know the new OS that is due this summer will allow iMac to be mirrored to HDTV but will it also enable iPad 3 to be mirrored to iMac?
Info:
iMac, Mac OS X (10.7.4)
is battery calibration as simple as fully charging and then draining battery ,or is there more steps?
View 4 Replies View Relatedfully back up and return to factory settings so I can set up again in Lion (from Leopard).
Info:
MacBook Pro
I just brought a brand new IMac today but could not connect the internet with the cable though the cable does work with other computers. Do I have to change the settings or .....? Or its the problem of the jack?
Info:
iMac, Mac OS X (10.7.4)
I am able to print wirelessly from my iMac to the HP b210a. But, the scanning function won't work. Is there an app I need to install?
Info:
iMac, Mac OS X (10.7.3)
I have 2 aliases from an INtel PC that I deleted from a flash drive. After hitting "empty the trash" I hear the trash epty but the 2 files are still there. When I use "secure empty trash" I get the error message:
The Finder can’t complete the operation because some data in “” can’t be read or written. (Error code -36)
The names of these files remain in the trash but I cannot remove them to the desktop to check permissions. THey show zero Mb file sizes.
Info:
iMac
I have an iMac (early 2008) and I would like to use my Sony Bravia TV (46EX520) as a monitor. Pretty easy so far but the trick is that I would like to do it wirelessly. I have the Sony wireless / LAN adaptor (UWA-BR100) which enable me to connect my TV to my modem/router (D-Link DSL-2730B). However, I do not want to stream movies, music or pictures from my computer to my TV. I want to use the TV as computer screen. I have not found a way to wirelessly link my iMac to the Sony Bravia magic trick?
Info:
iMac (20-inch Early 2008), Mac OS X (10.7.4)
I've been told it's possible to sync. an application on my iMac to my iPad. I use the calendar specifically for the event reminders that I set up on the desktop Mac when I'm at home, but it would be good if I could access this information on my iPad when I'm away from home.
Info:
iMac, OS X Mountain Lion (10.8.5)
They have been there for ages now and they were backupfiles from my external Western Digital FireWire 800 HD. They arent taking up much space at all as you can see but it annoys me that I can't delete them.
Info:
iMac 2.66, Mac OS X (10.5.7)
Yesterday I purchased my first ever iMac (OS X 10.9.4 - Mavericks I believe).
I'm trying to connect my HP Photosmart C7280 printer to work wirelessly but can't seem to work out how to do it.
When I connect via a USB the printer is recognised in Printers & Scanners, when I remove the USB the printer disappears.
My Mac and printer are both connected to the same wireless network (which we get through Virgin Media) - although my printer displays "no link" for IP address, don't know if this is relevant.
I have tried resetting print system, I have downloaded all Apple system updates, I have downloaded the latest driver I could find from the HP site (although this might have been unnecessary).
One factor that may be significant is that when I view the printer details (when connected via USB) I see the Mac's name, the printer model and the status but I don't see any reference to a Driver, which from what I've read, I feel I should be seeing.
I've also read reference to clicking "use" in a drop-down menu but from the details I see in the printer pane/dialogue box? I cannot see "use" anywhere or any other drop-down menus.
by the way, the printer always worked perfectly well wirelessly when connected to a Windows laptop on the same network,
Info:
iMac, OS X Mavericks (10.9.4)
I was told, to highlight the information and do a get Info on it and report back what the message said. When I go to finder and click on the attachment the attachment comes up picture stamp size but so does Picaso. I am unable to find a get information attached to the attachment at finder.
Info:
iMac, Mac OS X (10.7.3)
I am unable to fully access an application or even open a folder. If I press F10, I can see the folder for example but I cannot click on it. I have shut the system off and restarted and still no change.
Info:
iMac, Mac OS X (10.7.3)
I have an iMac but want to send files wirelessly to my Windows based laptop (Windows 7 Ultimate).Not complex files but folders containing documents etc... we share the same wifi network but I haven't got a clue.
View 3 Replies View RelatedHow do I stream my Keynote slideshow wirelessly to my Sony smart tv? Is there a way to see my desktop in realtime on my TV?
Info:
iMac, Mac OS X (10.6.8), 3.06 G Intel i3
My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.
Info:
iMac (20-inch Late 2006)
I have a 20inch early 2009 iMac running OS X 10.9.4.
I have been having crippling WiFi problems were I am forced to reload webpages 20-30 times before the page loads fully. I have tried many things and even upgraded the RAM to 8gb, and I still have the same problem. I have also tried resseting the WiFi, router, and iMac and it seems my problem is more complicated than that. I have run a test too and I had no lost packets. The strange thing is after a webpage not loading, if I refresh the page 20-30 times it finally loads!
Info:
iMac, OS X Mavericks (10.9.4)
need to use the imac only cable internet?
Info:
MacBookPro, Mac OS X (10.6.5)
I have a 21.5 iMac, purchased Fall, 2010, running latest OS. My cable TV & data provider is Comcast.
I want to route my Comcast set-top box into my iMac so that I can watch cable TV on my iMac.
Info:
iMac, Mac OS X (10.6.7)
I have an IMac from 2007 and MBP from 2011. They are mirror images both running latest version of Lion
I back up the iMac to a three year old OWC 500GB external HD with ultra ATA drive. I was backing up the MBP to a similar device. Both machines connected via USB 2 cable. I use CCC to perform backups.
I recently got a new WD My Book 2TB external device that is USB 3. I use it to backup the newer MBP. I have noticed that the backup takes longer with the new drive. I didn't expect the new drive to take longer. Is there some overhead when using a USB 3 device to a USB 2 machine that causes backups to take longer than with a USB 2 Ext. HD?
Info:
iMac, Mac OS X (10.7.4)
I want to hook up a second display to my new intel imac--what cable do i need to use?? I have bought 4 now and they are not the right ones. I am trying to connect a 17 inch apple LCD display as a secondary screen for my imac. my goal is to use the imac for vocal recordings ( already set) and the 17 inch for script reading in my vocal booth.
Info:
iMac, Mac OS X (10.7.4)
I was wondering how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:Three Ethernet Cables Now how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? Also, I do not want to use CDs and have no CDs that came with the computers. I want to put Xubuntu on the eMac and Debian on the iMacs and erase the rest of the Hard Drives. The computers getting this are the iMac G3s and the eMac G4 in my Signature.
View 1 Replies View RelatedI have a G4 in my living room and my old PowerMac 7300 in my bedroom. If I want of use either one to go online I have to disconnect one to connect the other. I cannot connect both at he same time. I use broadband cable from Cable Vision in New York. I was told about a router. Can anyone give me advice on the name of good router and whether on not it will slow down the access speed on the internet?
View 2 Replies View Relateda Cable that DEF transfers audio over to the tv? Also here is my macbook pro model. Does it do Audio? Build 10FS69. Someone said there is a belkin one, is that right? Also, I just bought one from Monoprice and that f'in cable doesn't work
View 17 Replies View RelatedHow do I connect a motorola fios hd cable cable box to an imac?
Info:
iMac
I have multiple problems: a. When I connect a cable to the internet, i am unable to directly login to the internet. I need to go the ISP site, login and then it connects me. I have tried to create some network connections which are not letting me connect directly without requiring a password. PLease note that I have provided the login id and password in the network preferences and created it but unable to login in.
b. Please also let me know how to delete all prior network settings.
I am new to apple and hence only capable of system menu driven capabilities.
More queries later as i set up my wireless.
Just wondering if anyone knows is the original iBook G3 Clamshell A/V cable is interchangable with the iPod A/V cables?As in, can I use an iPod AV cable for my clamshell to output to my television?
View 5 Replies View RelatedI have a Mac Pro with an optical line in. I bought a cable and connected it to the Mac Pro, but the receiver(where I want to plug the line in) is old and only received optical. Is there some sort of adapter that would convert the connect that doesn't cost $200? I was able to connect an analog cable from the front of the mac pro's headphone jack into the back of the receiver, but the sound isn't really the greatest.
View 1 Replies View RelatedQuick question - I have a cable line running from my wall to my cable modem, which in turn connects via ethernet cable to an AEBS. The AEBS provides wireless connectivity to four Macs.
Can I split the cable line in my room so that I may watch TV, or would this cut my download/upload bandwidth in half?
Looking for best conversion cable to hook my Mac Book Pro up to our new HDTV - thought someone said I should get a converter that converts Mac 800 firewire output to an HDMI cable hookup.
View 6 Replies View Related