Upgraded to Lion and now Skype won't recognise the imac camera. "Built in isight" is listed in the video prefrences but the test screen is blank. The Skype calls show a video icon with a cross through it and when I click it it blinks, then stays crossed off.
Camera works in facetime and photobooth (both apps closed down). Have restarted Skype but no change. Skype ok with Macbook Air, iPhone and iPad.
Info:
iMac, Mac OS X (10.6)
When I use skype my camera/video won't work. It works for every other program. I have tried everything. What can I do?
Info:
MacBook Pro
My FaceTime Camera of my MacBook Air doesn't work in Skype. I try to make a videocall but my camera doesn't work.
Info:
MacBook
Pro, Mac OS X (10.7.2)
I have a new air book with Lion version 10.7. 3. Skype was working fine but when I called yesterday my camera is not working. I can hear and see my caller and he can hear me but no picture of me.
When I check Skype preferences there is no picture from the camera, yet the little green light is on by the camera. I have reloaded the latest version of skype but still no visuals.
Info:
MacBook Air, Mac OS X (10.7.3)
I don't know how to turn on my camera so that it will work with skype?
Info:
iMac, Mac OS X (10.7.3)
I cannot get Skype to work on my iMac
Info:iMac (27-inch Late 2009), Mac OS X (10.7.4)
I have reached this website after scrawling to find a solution on the internet. I hope someone can help me with this problem.I have a 4 years old G4 ibook (OS 10.3.7), and have been using it for internet, skype and foto-storage mainly.Situtation:Yesterday I tried to use the internet (Firefox browser) and skype, but the skype didn't work at all. Since firefox was not working properly either, I did force quit and restarted the computer. I attempted this several times until I could use both applications (never had any problems before). However, Skype didn't work, and in the end, I could not quit firefox at all. At last I did force quit again, and saw white screen with apple icon at the centre when restarting. No time-spinning mark, the apple just sits there.
Troubleshooting that I have done:
I called up support center, and they told me that it's very likey that the computer is stopping at "'carnel" stage (I'm sorry but I don't know what this is). The possibility that it's got something to do with HD is 50/50, so I may have to send it to repairing service in the worst case. They told me to try using Disc Install CD1 to check/repair something wrong in my computer. So I followed the instructions and inserted the install CD and restart the computer with "c" key. The computer read the CD and Installer window showed up. As instructed in a manual, I used First Aid in Disc Utility, and tried "repairing disc". After a while it said "1 HFS has been repaired". It also said that Macintosh HD doesn't seem to have a problem", so I quit the disc utility and restarted the computer.
Against my expectation, the same white screen with apple came up on the screen and sits there with no other movements.I'm afraid of trying somethinig without further so I hope I can get the same story or ideas that someone here might have.
I have Skypes working on my G-5 and have added Macam and a Logic Tech Chat camera. The camera works well on my screen but is not seen by others when I contact them. I just get the small black screen in the Skypes window. Is ther another piece of software I need other than Macam for Skypes connection or.I did get a message on screen that Skypes had connected to my camera.
Information:
G5 dual 2.7
Mac OS X (10.4.8)
23" Apple
Recently, whenever I use Skype, my camera turns off after a few seconds with the following message: "Camera may be in use by another application or removed. Please try again."I've tried restarting, unplugging/replugging,
I am an Imac user and learning this new macbook air. I have face time on this and am wondering if I can use skype with the facetime camera of if I need to add a remote web cam? I am not seeing the video function in skype.
Info:MacBook Air, iOS 5.1.1
Just suddenly stopped. First it wouldn't load on skype, then after restarting it is not available at all, not even on photo booth and other apps that use it.
My specs: Processor 2.4 GHz Intel Core 2 Duo Software OS X 10.9.3 (13D65)
Info:
MacBook Pro, Mac OS X (10.7.5)
I have a firewire 400 camera that i'm using for a project and one firewire 800 slot on my iMac (Late 2009). When I plug the camera in, nothing responds no matter what I do - tried resetting the PRAM and SMC. Compare this to my older iMac (Late 2007) which has both firewire 800 and 400 ports. I plug it in and it pops up using the underlying Quicktime controller api on either the 800 or 400 port no problem. So I figured after trying to install a firewire camera library (libdc1394) which I need for my project which didn't work, that it must be a hardware issue, so I took it to the Apple store. The genius at the store booted the OS (Lion) from a firewire drive via 400 to 800 cable (no external power to the f/w drive was used) and then using the spare 400 slot on the hard drive, he plugged (daisy chaining) in my camera and it loaded! So this suggested 2 things - my OS is corrupt or my card can't read straight from my device but why a hard drive in between would change this is beyond me. I came home and installed OS X on to an external USB hard drive and loaded up from it - so this is a fresh version of Lion, there should be no software issues. Plug the camera in to the I/O board of the iMac but load the OS from the external USB hard drive - nothing happens, the profiler doesn't detect anything at all. On a side note, I installed XP and Ubuntu Linux and they also can't detect it, which further suggests its the device or I/O board when interfacing directly with this camera. I've tried providing the devices with external power, daisy chaining 2 cameras, using a usb hub....nothing works. Just for good measure, I tried to boot Lion off the external USB on my older iMac and again, it worked no problem, which to me really narrows it down to the hardware.
I feel like perhaps the port is a bit dodgy and when the genius daisy chained it, it worked better, but no idea why. Someone said I should get a firewire 400 to usb adaptor
I was messaging with some friends on Adium and I couldn't see their cameras neither them could see mine. Does skype offer this?
View 12 Replies View RelatedWhen I try to take a photo it says the camera is not connected. It used to work with these applications. I did all steps on Apple Support Page [URL] but it still doesn't work.
Info:
MacBook Air, Mac OS X (10.7.3)
I have OSX 10.5.8. In the past, I was able to use PhotoBooth, but now when I open it, all options to take a photo are grayed out. The screen, where, I believe, previously I'd seen whatever was in the built-in camera's lens (generally whatever I put in front of the screen to photograph), I now see all black with a white camera icon crossed out. Skype works fine though. When I try to load iChat, it crashes unexpectedly. For clarification, I'm using the built-in cam and do not have external camera hooked up to it. I don't really care about iChat, which I never use, and am very, very glad that Skype, which I do use, is working. However, I would very much like to get PhotoBooth working.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.5.8)
I have a 15'' 2010 macbook pro that I've only owned for about a month and a half. At first the isight camera worked great,I used it multiple times for photobooth. But a few weeks ago I tried to used it for skype and noticed it just showed a black screen. I thought maybe the problem was just with skype, but I started checking other programs and it's the same in all of them. The green light is on and it's recognized in system profiler, but the screen is black.
A few days after this happened, the problem seemed to fix itself, but then it went right back to the black screen 2 days later, and had been that way ever since.
I tried resetting the PRAM, but it didn't help. Is there anything else I can do, or is it time to give in and take my macbook to the Apple store?
I have a problem with my camera on my 2.66GHz iMac.I was in Sofia (Bulgaria) for three days.I came back and sow that my camera wasn't working and this message appears in photo booth and skype: There is no connected camera .Is this a hardware problem,or a software one and how can I fix it?
View 2 Replies View Relatedso my colleague's computer, a G5 powermac, had to have the harddrive replaced a month ago. she was in thunderbird, OSX asked her if she wanted to install the usual software updates, she hit yes, and it all went blank and would only restart to a grey screen after. took it in the the store, they replaced the harddrive and migrated everything over to the new one. ever since, she can't get skype to work - no matter how many times we try reinstalling it, it just bounces once in the dock and then quits. there are other quirks too - in word, some of the icons show up as 'quicktime pict'.
we've tried running disk utility, deleting the plist and cache files related to skype, reinstalling quicktime, and nothing helps. any suggestions???
I can open up skype but cannot sign in. Its the lastest verison. My Macbook pro is brand new.
Info:
MacBook Pro, Mac OS X (10.7.3)
It used to work with Snow leopard.. but now it crashes on login any ideas??? i first thought it is afloat (plug suite) but i disabled it...(and unistalled) I Think the "the tube" Update messed skype up but... maybe you know it better
Code:
Process: Skype [2732]
Path: /Applications/Skype.app/Contents/MacOS/Skype
Identifier: com.skype.skype
Version: 2.8.0.659 (2.8.0.659)
Code Type: X86 (Native)
Parent Process: launchd [685]
Date/Time: 2009-09-14 09:09:35.319 +0200
OS Version: Mac OS X 10.6 (10A432)
Report Version: 6...........................
Why does my webcam on Mac Book air not work with Skype
Info:
MacBook Air
cannot get microphone to work with face time and skype
Info:MacBookPro, Mac OS X (10.6.6)
I have an early 09 mini, and have a problem with skype. I have a new logitec c500 webcamera that works with my pc. The skype account works with my first gen black macbook, but on the newer mini I can see myself but the audio does not work. The cam connects to one of the usb ports and I've configured sounds to "unrecognized usb sound device" that came up after I plugged the camera in the mini, but on the "test calls" I still can't hear myself. The skype for mac is a beta, but others seem to do ok.
View 4 Replies View Relatedhas audio and headphones 3.5 mm females. I would like to know if buying a cheapo headset (with mic) with the 2 x 3.5 miniplugs would work for Skype phone calls or I would rather get a USB headset
View 9 Replies View RelatedMy mac os x output sound doesn't work when i skype someone, they only can hear me type and make thumping sounds on the table but they cant hear me speak and when i speak she can't hear me?
Info:
Mac OS X (10.6)
Contemplating on buy a camera and a MAC, but need to know which camera will work best with a MAC, Nikon or Canon?
View 1 Replies View RelatedAnyone using one of these? Does it work well in ichat and other apps? Did a search and some people mentioned they were getting it but nothing concrete on how well it works!
View 11 Replies View RelatedOn the right hand side of my desktop when I download a program it seems to put an icon or doc on the right hand side. Like right now I have a skype dmg file I can't delete as it says Skype is in use, then right above that is a seperate skype icon that even if I drag to dock it still stays on the right hand side (like a copy), then I downloaded open office again and it put the install icon there (like when you open and you drag your program to teh applications folder)
View 1 Replies View RelatedWhy can't I hear anything on Skype, even though the volume is turned up?
Info:
iMac, iOS 5
The camera of my Mac Book Air doesn't work anymore. I can't find a way to activate it again or to check whether it's ok or not.
Info:
MacBook Air, Mac OS X (10.6.8)
