I would like to format a partition on an old iMac (mid-2007) that is compatible with Xubuntu 11.10. According to Disk Utility the current partition is formatted with Mac OS Extended (journaled). None of the other format options appear to be likely candidates.Certainly the existing format does not appear to work. What must I do?
Info:
iMac, Mac OS X (10.7.3), Mid-2007 Version
I'm running Snow Leopard on my new Macbook Pro. I've got a 1.5TB External hard drive that I'm trying to figure out how to format in HFS+ with Apple Partition Map. I can figure out how to format in HFS using Disk Utility, however it still does it in GUID format and I do not know how to do it in Apple Partition Map.
Googleing this for hours has lead with all kinds of information on how to go to GUID FROM Apple Partition Map but not the other way around. I know GUID is the new hottness.. but this drive will be used exclusively to connect to my XBOX 360 and it supposedly only reads HFS+ when its formatted with Apple Partition Map. (I have tried it with Mac OS Extended (Journaled) with GUID, and the XBOX does NOT recognize it) I do not want to use Fat 32, (I know that that is the other major option) beacuse it limits file size.
I wiped out my hfs+ partition (don't ask me how, suffice it to say that me, the computer nerd, made a STUPID mistake). I have my Tiger install disc. I need SOME way (possibly from a Windows partition?) to format only a SINGLE partition to hfs+ (I already have the unallocated space ready to be formatted) without losing any other data, as I no longer have a way to re-install Windows if I wipe it out, and I need Windows (I just don't want to ONLY have Windows!)
View 6 Replies View RelatedI have a bunch of videos that I recorded on my windows computer, they're in an uncompressed AVI format (huge files). Since I wanted to use iMovie 09 for the editing I decided to convert them to mp4 using VisualHub (to compress them and so they would work with iMovie) and they seemed to work fine, I could still see the video on Quicktime. The problem is that I still can't add them to iMovie. Whenever I add one of these videos as mp4 or dv (I've tried both) they go through the process of adding them to iMovie (copying, creating thumbnails, etc.) and then when it's finished, that's it. No video is actually added to the event. It happens all the time no matter what other options I change when converting the file. And by the way, I noticed the "Show All Clips" option at the bottom of the iMovie main window, it's not that. Anyway, here's the info on one of the files (from the Quicktime X info page of the video):
File: Video 4.mp4
Format: H.264, 800 x 600, Millions, AAC, 2 channels, 44100 Hz
FPS: 30
Data Size: 84.3 MB
Data Rate: 4,505.10 kbit/s
(This file goes through the process when I add it to iMovie, but doesn't actually get added). Some of them have an 840 x 524 size instead of 800 x 600, but they still fail to get added to iMovie properly.
I am looking for a program to convert avi files to another format so I can watch them on my xbox's dvd player. My Xbox won't read the avi format for some reason.
View 18 Replies View RelatedBasically, my old Powerbook G4's hard drive died and I figured I could just use a live cd in the meantime. Sure it takes a long time to boot up and open apps but I was just going to use it for quick web searches. So, I got the latest PPC Xubuntu ISO (9.04) and burned it to a 700meg CD-RW. It's hard to explain what happens next so I made a video. If your wondering what the loud clicky noise is when I hit the power button, it's the dead hard drive trying to work. [URL:...] Any idea's on what to do? I'm not an experienced linux user but I know a few things.
View 1 Replies View RelatedI've been searching the net for a Multi Format Switcher (MVX) that's compatible with dual-link DVI. Minium additional connections required are Componet Video and two additional DVI Sockets.
Does anyone know which out of the sea of MVX's will work with the ACD30?
FYI: I don't mean display splitters.
Does anyone have a good suggestion for converting MPG files (Windows) to a file the MAC can read?
View 1 Replies View RelatedWhen I download audio files from Vuze they play perfectly in itunes but I cannot sync them with my Iphone. Is there some kind of transcoding I need to perform before my Iphone will support these audio files?
View 4 Replies View RelatedI'm looking for a easy to use video format converter to format a ".m4v" file to a format that iTunes or Quicktime will recognize.
View 6 Replies View RelatedWhich is the best way to format external hard drive to be compatible with both Lion and windows, and at the same time support high data transfer?
Info:
MacBook Pro, Mac OS X (10.7.1)
I am trying to figure out how to partition my HD so that it can speak easily between a Windows formatted HD and Mac HD's without the Error Code -0 (meaning it won't transfer files larger than 4gb's from HD to HD. I use a Mac running Snow Leopard and I am formatting using Disk Utility. I have always done the MS-DOS (FAT) format but like I said I am getting the Error Code -0 and it's become more of a nuisance than anything.
My options are Mac OS Extended (Journaled), Mac OS Extended, Mac OS Extended (Case-Sensitive, Journaled), Mac OS Extended (Case-Sensitive), MS-DOS (FAT) and Free Space. Is it possible to get the best option explained to me in a way that's more understandable than from the research I have discovered. Also I know Finder has issues thus the reasoning for the 4gb limit. I have downloaded a 3rd party app Path Finder to allow me to bypass that limit except whenever I copy from one HD to another it disappears once the transfer is complete.
I have an external HDD with ~40 GB of data (~200 GB free) and my internal HDD only has 25 GB free. How is it possible that I could resize the HFS+ partition and add a FAT partition to the external drive without losing any data (like Disk Utility will do)?
View 5 Replies View RelatedIn Bootcamp I follow the guidelines as stated for installing Windows XP Professional. However, after selecting the size of the required Windows partition during the Bootcamp Assistant install, it automatically goes into copying the appropriate windows files into 'whatever'. On Restart it gives me the "Press any key to boot from CD. Disk Error. Press any key to restart". Pressing any key DOES NOT work and I can only get out of this by turning off the computer. I have run a search on these forums to see if there is a solution to this and the response is essentially that I have to "format the partition to either the FAT or NTFS. I am following the install disk BUT it does not give me the option to format the windows partition. What am I doing wrong?
View 4 Replies View RelatedI am partitioning my external hard drive into 3 partititons. I will use 2 of them for time machine drives and the third will be for general storage usage.
What is the best type of format to use for these partitions?
Info:
Mac mini, Mac OS X (10.7.2)
I am using this guide to get a new HD into my PS3: [URL:...] It says that the HD I back my PS3 up to needs to be formatted to FAT32. I have an external HD that I use with my mac, its partitioned into 4 parts. I have one partition which I don't use which I want to back my PS3 onto. In Disk Utility I select that partition and I only get 4 option under the Erase tab, 4 different Mac OS Extended options.
View 2 Replies View Relatedim trying to install windows vista on my imac. when i go threw the set up when it tells me to pick my partition i do and then i have to format it to ntfs when i click the button to format i get this error:0x8004005 and it doesnt allow me to continue... i tried searching the internet for other ppl but there doesnt seem to be that much on it.
View 2 Replies View RelatedI ran the bootcamp utility on my Macbookpro with no problems. Selected the first option for partition of 32Gb, ran the XP Pro SP2 disc and it never gave me the option to format... Obviously got a "disc error, press any key to continue" message since the drive is not "bootable." So I found a thread online that sent me to the XP site to discuss FAT32 issues. The drive can't be larger than 32Gb (which it shows 32,600 after the partition), so I deleted the part. and rebuilt it at 30Gb. Still didn't give me the option to format the drive! It shows the partitions, so I select the C:yatta-yatta-/bootcampwhatever , press enter and it starts installing... Any idea on how to force the XP setup program to allow me to format the silly partition?
View 4 Replies View RelatedI think at one point (probably when I switched from my 80GB to my 500GB drive) I screwed up and made the partition format on my drive Apple Partition Format. As I was just doing disk cloning, Leopard had no problem with this, and never mentioned anything being wrong (if it did I could have fixed it back then). However now, when I try to upgrade to Snow Leopard, it complains about this, telling me I can't upgrade and my only real option is to back up my data and fresh install. Problem being, I don't have a 500GB drive laying around, and I don't have the money to buy a 500GB drive to use once to back up all my data. It pisses me off to no end that Leopard didn't complain about this when I first did it if it was going to be a problem in the future (back when I could have fixed it) and only now it's become a problem. I guess my question is, is there any way I can get by this problem and install Snow Leopard? Or am I gonna have to wait till my friend needs to wipe his PC again and borrow his HD for a night?
View 2 Replies View RelatedOn my MacBook i am having a little trouble actually installing windows on a bootcamp partition. When installing XP it just installs and then when i boot into the partition it just says 'disk error press any key to reboot' and when i try to install windows 7 it says i cant because it needs to be NTFS formatted, so how can i format it to NTFS?
How do i format a bootcamp partition to NTFS?
Mac Pro 10.6.3
Boot Camp Assistant 3.0.1
Windows 7 Home Premium (64 bit version)
After trying to install Windows 7 on a 32 GB partition using Boot Camp Assistant, I received an error message saying that Windows 7 needs to be installed on a partition formatted as NTFS.
How do I format the Windows 7 partition as NTFS?
The steps outlined by Boot Camp Assistant don't seem to include an option
to format a partition as NTFS.
I noticed in disc utility that under the erase tab it has the option to format a drive to fat32. If I create a windows partition using bootcamp and then go into disk utility and erase to fat32 will this allow a boot into the xp drive? My xp disc keeps restarting before it gives me the opportunity to format the drive to either a ntfs or a fat so I need a way around this?
View 4 Replies View RelatedI just ordered a 1 terabyte WD external drive, and I'm planning on creating one partition for music/movie storage, and a second smaller partition for a superduper clone. So my first question is, what format should each partition be in? I'd like the movies/music partition to be Windows compatible...will choosing FAT32 make any difference in my use of this partition when used with my OSX machine, and what benefits would I see by using Extended Journaled instead? Then, what format do I want the Superduper backup partition to be? Finally, when I initially format and partition the external drive, is there anything I should do to prepare it first, or just go right ahead, divide it in two (approx. 650gigs for music/movies, the rest for superduper) and then format each partition on its own into the formats they need to be in? Also, do I use GUID partition format?
View 9 Replies View Relatedboot camp assistent to add a Windows partition on my Macbook pro hard drive, about 40 gb, I installed windows 7, I couldn't manage to restarte the computer in MacOSX (i didn't had internet access) and I din't know that you just have to press option at start up, so I did a "format c:", the day later I found out what to do and I used again Bootcamp assistent to erase the partition, but even if I removed the partition, my hard drive still "see" only 460 gb instead of 500 (by looking at finder and tech tool deluxe), my hard drive shoud be 500gb.
View 1 Replies View Relatedi have a 500GB HDD which has two 250GB partitions, one which is working for time machine, and another one for storage, that one for storage is NTFS, so i can just read but not write files, which is very annoying.
Can i just reformat that partition without loosing my time machine files? I already copied the Storage files to my internal HDD, also which is the best format? I want to be able to read/write stuff both on PC and Mac
Is there a way to copy my Time Machine files to my computer, reformat that partition too to FAT32 and pass them back?
I'm using an external drive through FireWire 400 on my MacBook Pro with 10.5.5. It's a 320GB with 22GB in "free space" and the rest formatted with HFS+ (used as a Time Machine backup drive). I want to setup that 22GB as a FAT32 partition to be writable in both Windows and Mac. Normally, it sounds like I'm supposed to use Disk Utility on Mac and just choose MS-DOS(FAT). Unfortunately, that choice is not presented. I can choose four different Mac-based file systems, but not FAT. Why doesn't that show up as a choice? I've tried leaving it as free space and using a PC to format it. I've tried formatting it as a Mac-based drive and using the PC to format. I've even tried installing MacDrive on the PC and using that to format it as FAT32.
View 3 Replies View RelatedI have partitioned my external Hard drive into three different partitions, each of different formats. Two partitions for backing up my macbooks and one to copy to and from my windows PC. I would just like to know if in any way is it possible for me to be able to re-partition one of the partitions, without affecting my Time machine partitions, in case the need be in future.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
i'd like to format my lacie external hard drive with two partitions:
1. HFS+ partition as a bootable clone of my internal drive
2. FAT32 partition readable by any windows (and mac) machine
i'm creating my partitions with disk utility, but i hit a snag when choosing a partition scheme...apparently i cannot choose a different scheme for each partition.
so when i format the drive with GUID, the FAT32 partition is not even recognized by windows XP. but when i format the drive with master boot record (MBR), the HFS+ partition is not bootable...
I have Windows 7 installed on my sons MacBook Pro.
The Drive is partitioned at 500GB for Windows and 300GB for Mac.
In windows, I need to shrink the Windows drive, and then create 2 extra drives from it.
However, I can shrink the drive, but when I try to Format, it tells me that it cannot find the drive, and then it changes the drive types to all "Dynamic" including the Mac Drive.
And once this happens, I can no longer access the Mac drive during Boot, and windows will not load, as it cannot find the drive during windows boot up. And which point, I have to restore the system and it takes up to 6 hours to installed Lion, as my Internet is slowing that a cold winters day.
So, my question is the following.
How can I successfully shrink the drive.
Then Partition the FREE space
Then Format to NTFS without loosing drive type and integrity?
Info:
MacBook Pro, Windows 7
The hard drive is a 1TB Western Digital my book I bought it in January I think. I tried to format it to Mac OS Extended (Journaled) when I got it but for some reason every time I try to erase the part thats named disk3s2 or partition the main one it stops a little before half way through. I don't think its the hard drives fault so I called apple about it one day and they helped a little but it didn't work. Thanks in advance if you can help me. Also a few times I waited about seven hours for it while I was at school and when I came home it didn't move.
View 8 Replies View Related