I try to put my iMac (Lion) in the sleeping mode. The screen becomes black but the hard disk doesn't stop. I don't see any live process in the activity monitor. This problem was not there before and I have no idea to correct it.
Info:
iMac, Mac OS X (10.7.3)
I turned on my iMac (20in 2008 model) and after the apple logo appears, I get a gray screen that says "process 1 exec of sbin/launched failed". I'm pretty sure it's because my hard disk is full. I tried booting up in safe mode, but my wireless keyboard battery died. I put in new batteries, but I need to get to the desktop to reconnect the keyboard. I tried using a usb wired keyboard, but it doesn't power up until I'm on the desktop screen. I don't know what else to do. I need a keyboard to boot to safe mode, but I need to be fully booted to work the keyboard.
Info:
iMac, Mac OS X (10.5.8)
Using my iMac in Target Disk Mode with Thunderbolt connection to Macbook Air.
Is there a way to get back to my iMac desktop without forcing it to restart? (holding down the power button)
Info:
iMac, iOS 5.0.1
Odd stufff, I have a 500 gig Lacie ext HD that my user uses on her Vista machine...
I am setting up a replacement for the Vi$ta machine, which is a 24 inch imac.
I plugged in the ext HD and nothing happened after I powered on the ext HD.
I checked disk utility and it showed up but as a 2TB size ext HD...
I unplugged the Lacie and plugged it back in and all the info showed up correctly.
But ALL the buttons under "First Aid" are greyed out so I cant verify permissions, disk, or repair disk or permissions.
Information:
imac 24 inch
Mac OS X (10.5.8)
First thing to say is that the G4 starts fine (remarkably quickly in comparison with the new iMac) and appears to run okay. However, on running the disk utility I’ve found that there is a problem with the hard drive and it won’t verify either the hard drive or repair the permissions. Like many of its kind the optical drive has failed and therefore I can’t use the installation CD to reinstall or anything else. My daughter has been using the G4 for some years but has upgraded to MBP and wants me to take her files and put them on another hard drive and then wipe the G4 clean. At the moment the disk utility will not work at all. So I’ve been attempting to start it up in TDM via FireWire. The G4 starts up okay in TDM (the FireWire symbol appears on the screen) but there is no sign of it on the new iMac. In the light of what I’ve said so far does it seem probable that I will ever be able to get the start-up disk to work? I have connected the two computers via a Wi-Fi network and have been able to see the disc but when I have run the disk utility it has always reverted back to the G4’s own program.
Info:
iMac, Mac OS X (10.7.4), 24" Late 2009
The computer speaks during a training mode and will not stop. How do you get the settings changed?
Info:
iMac
My imac keeps starting up in safe mode how can i stop this?
Info:
Logic Studio, Mac OS X (10.6.7)
I have two different iMacs: late 2011 and Mid 2010. Both imacs wifi stop working after sleep mode. ***?! Ipod and iphones work properly at is time. I have checked disk utils and fixed permissions. Everything is updated. Maybe there is the way to reenable wifi module without rebooting my computers?
Im very dissapointed apple imacs. Lcd of mid 2010 being changing for the second time. Last time it worked ok for 5 month. ***?! Is it ok for lcd screen? Or maybe I should turn into hackintosh to avoid poor-quality hardware? Rofl. **** I have only apple devices and starting nervous about it.
Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.4)
My printer won't stop printing in duplex mode. I have disabled all duplex settings and it's still printing double sided.
Info:
iMac, OS X Mavericks (10.9.1)
My iMac doesn't turn off in the normal way any more. The system shuts down and the screen becomes black, but the fan keeps on running. And it deosn't stop! The only way to completely shut down everything is to hold the powerbutton.
I already have reinstalled Lion, but the problem is still prensent. I've got this iMac for around 6 months now, but this problem occured around 2 weeks ago. Before everything has been all right.
Info:iMac, Mac OS X (10.7.3)
I recently purchased a mac mini which i use as a HTPC. A lot of the time i use VNC to connect to this machine when i'm not using it as a HTPC. The problem is that it always goes into some sort of sleep mode when i haven't used it for some time. I'm not to familiar with the ways in which a mac can sleep/hybernate but what i'm looking for is a way to let it sleep but still allow me to connect to it through VNC. Alternatively i'd like to be able to remotely wake it up somehow.
View 5 Replies View RelatedI was trawling through the sticky's a few weeks back and i noticed their was a app to stop the display from sleeping when watching a film but i cant for the life of me find it now.
View 3 Replies View RelatedI want to use my MacBook (10.4) as a Hard Drive using target disk mode.
I am connecting it to my Mac Mini (10.5).
It is not showing up on my desktop.
My mac won't recognize the cd in the drive and now won't eject the disk or shut down without a using the on/off button.
Info:
MacBook Pro, Mac OS X (10.6.8)
How can I prevent my MacBook Pro to turn into sleeping mode when playing music on it with Itunes?
Info:
MacBook Pro, Mac OS X (10.7.3)
G5 iMac model A1058, 1.8/512mb/160gb.Bought this machine used on e-bay with no operating system, powers on fine, flashing folder with question mark= no operating system. Tried to connect to my i-book in target disk mode via fire wire and the hard drive does not mount on the desktop. Can't find it in disk utilities however i get this in system profiler under firewire.
View 15 Replies View RelatedMy Macintosh Hd is 187GB. It says used amount to be 174 GB. However when I add up all the componenets users 124.35GB+Library 8.91 GB+Applications 9.41GB+ System 5.36 GB= 148GB Approx  What happened to the other 26 GB.
Info:
MacBook Pro, Mac OS X (10.7)
I tried to login to my brand new iMac (running Lion 10.7) via Target Disk Mode so as to transfer my data from my old machine. However, the passwords didn't work. This is not a disaster, however, I am now unable to exit Target Disk Mode. I have tried removing RAM and restarting holding down alt+cmd+R+P to reset the PRAM but it just goes straight back to Target Disk Mode. No matter whjat I do it goes back to Target Disk Mode with the padlock and opassword box.
Info:iMac, Mac OS X (10.7.4)
OSX 10.4.11 (Tiger) PPC G4 733 MHz
My Tiger volume gets stuck when starting up, it doesn't get further then the grey screen with the Apple logo. The clock with stripes keeps working but it doesn't get me to the blue screen.
For compatibility reasons concerning different softwares i use (Protools, Reason etc...) i keep changing the internal HD's for years now, thus changing the OS's (10.3.9, 10.4.11 etc). Never caused any problem.
When i boot from another 'master' volume (f.e. 10.3.9) OR from the OSX install CD, putting the Tiger volume as 'slave', in order to verify its disk permissions or the disk itself to be able to repair them, it's 'invisible', not 'seen' by the other volume.
So no 'verify disk permissions' nor Combo Update possible, maybe those things could solve my problem.
My cables are working perfectly: making the exact same connections and jumper settings with all my other volumes, is no problem at all: every volume is correctly seen by the others.
Also, there is no USB or external firewire device connected while trying to start up.
Remark: never had any problem with this Tiger volume, starting problem only occured yesterday AFTER installing Toast Titanium (which worked normally), shutting down and trying to start up again.
Nevertheless, some minor problems occured beforehand these last days: some apps didn't work anymore, like Safari, itunes, installer and UnrarX. But i don't know if it's linked.
I'm using a Late 2010 27" i5 iMac and a Late 2009 15" MacBook Pro. I'm going to reformat and reinstall the iMac this weekend but need to grab all my Music/Documents (you know the drill) from it. Last time I did this, I did it over a 100mbps network, needless to say it was absolutely horribly slow. So, today I'm going to pick up a cheap-ish firewire cable and target my laptop as a disk using target disk mode.Â
Which type of Firewire cable do I need to buy? It's either a 4-pin or 6-pin choice, no 9-pins available at the shop I intend to visit. I have no idea what the difference is between them - hardware is definitely not my game. Both ports look like this (taken from Apple's docs, Firewire 800):
Info:
iMac, Mac OS X (10.7.2), 27" Quad, 2010
My iMac won't boot up. I think its HDD is dead . Is there a way for me to use target disk mode to boot from my laptop HDD so that I can rescue my iMac HDD?
Info:
iMac, Mac OS X (10.6)
I'm trying to sort out a problem with a mid-2007 iMac. When trying to start it up normally it would get past the Apple screen, then go onto a blue screen with a cursor and stay there.Â
I made a bootable Snow Leopard USB drive to try and repair the disk / re-install the OS. Plugged in the USB drive, and tried to boot the iMac into startup manager by holding down the option key. But instead of showing the volumes to launch startup manager, it keeps bringing up a grey screen with the Firewire logo on, which I believe is what happens when launching into Target Disk Mode.
Info:
iMac
We have some new Intel iMacs and have transferred some information from our previous G4 PM (one MDD and one Quicksilver) to the new iMacs. For some reason the G4's will now not boot up and kernal panic on the gray Apple boot screen. This has happened to all the G4's we have in our office. They are running OSX 10.2.8 and the iMacs are running OSX 10.4.4. We can still mount the drives from the G4's using FireWire Target Disk mode.
I have tried zapping the PRAM etc but they still wont boot. I have also tried running the OSX 10.2 Installer disks to try and reinstall OSX on the G4's but the installer cannot see the drives?
I tried running the disk utility. It finds the hard drive but wont let me verify/repair permissions (the option is grayed out). It will only let me verify/repair the disk, but it finds no errors. The installer cannot find the disk at all.
We have more than one hard drive in the G4's and the target disk mode will only mount the system drive, it doesnt see the others, so we cannot retrieve out information. Whats going on. Never had this problem before.
Anyone have any idea what is wrong. Never had this problem before using the FireWire transfer.
My Imac has been running super slow and the hard drive will not stop writing. Current Specs running 10.7.3, 2.8 Ghz Intel i5, 4 GB 1333 MHz DDR3. I have had it for less than a year bought refurbed from the online store, I wiped the hard drive once before but it did not help at all, I am currently running parallels but the problem existed before that. I also have an external hard drive but makes no difference in whether it is hooked up or not
View 1 Replies View Relatedmy hard drive has gone from 266g to 32 in one day what is the primary cause-model Name:iMac Model Identifier:iMac5,1 Processor Name:Intel Core 2 Duo Processor Speed:2.16 GHz Number Of Processors: 1 Total Number Of Cores:2 L2 Cache:4 MB Memory: 2.5 GB System Version: Mac OS X 10.5.8
Info:
imac
I've connected my new Iomega Minimax with a firewire cable directly to my iMAc but nothing appears on my desktop.
Info:
iMac
I have a 15" mbp with 10.6 Intel core duo, 4gb ram with a boot camp and ubuntu partition through parallels. The other day I was installing xcode from apple's website, which failed 3 times after downloading saying the package couldn't be expanded. I left my computer for a while and came back where i then had to log in again. it rejected my password numerous time (i'm positive it was correct). when i restarted my computer i got a kernal panic screen when the apple logo came up. it told me to restart the computer which i did. didn't work. i restarted with the osx cd to use the disk utility. when it checked the drive it found a bunch of errors, which i then tried to correct. it went for a couple minutes then told me they couldn't be fixed and i should try to back up my data and reinstall osx. i don't know how to back up my hard drive when i can't log into my account. i've tried to boot in target disk mode and copy some files that way, but the only disk the other computer sees is my windows partition- no mac partition.
i've also tried these, none of these have worked: restarting in safe mode resetting the ram and pram booting with different sticks of ram all result in a kernal panic.
my windows partition still works fine though (as much as i hate to say it) the only things I really care about on my computer are my files from school and my itunes library. is there any way i can get these files off my computer?
Whenever i put mac macbook pro to sleep, it only stays sleeping for about half an hour and then wakes itself up. It does it whether i close the screen or manually put it to sleep. When its awake, the system is running but the screen is dark unless i click a button.
View 5 Replies View RelatedWhen my iMac 27" is in sleep mode I have noticed that the hard drive spins up very regularly every 4 or 5 minutes. Also when placed in sleep, the monitor takes about 30 seconds to go black. It also wakes on its own for no apparent reason. No new software has been added, only normal updates, running Lion. Time machine backup is done every couple weeks.
View 5 Replies View RelatedI have a 27" iMac with four USB external hard drives attached. The drives are working fine, but one of the drives takes a long time to wake up after it hasn't been used for a while. The other drives are accessible from the Finder almost instantly, but this one drive causes the spinning ball for about 10 seconds before it is accessible. Not a BIG deal, but it happens all the time even after relatively short periods of inactivity.
I thought maybe I could uncheck the "put the hard disks to sleep when possible" option in the Energy Saver preferences. But this would presumably affect all of my drives (including the internal) and that might lessen the longevity of the drives, right? Are there any options for just turning off the sleep for this one drive, or perhaps a way to shorten the wake time?
