My Mac OS X as soon as I turn it on the fan is running. I have already gone thru the reset SMC . Could I have too much stuff in it?
Info:iMac, Mac OS X (10.5.8), 2.66 GHz Intel Core 2 Duo 4GB 1067
Machine: iMac intel core 2Â 2.66Ghz Model A1224
sn# YM******ZE3Â
Ran the hardware test by pressing 'D' key. hardware test came back with error :4SN/1/40000000: T00P-65.250Â
I am guessing some sort of temp sensor might need replacing.Â
Info:
iMac
My step-son works for a company that uses a variety of computers in their test dept. and when they upgraded the test equipment they gave the old stuff to employees.My step-son is a dyed-in-the-wool PC guy who doesn't care for Macs so when he saw a G5 PPC sitting there he took it home and gave it to me.
It's a 2.0 GHz dual-processor with 8x AGP video. I checked it out and the only thing "wrong" with it is that someone has set up the fans, all of them, to run full-speed all the time.First, how did they most likely do that and, second, how can I return the fans to their normal operation. This can't be good for the computer and it's so loud and annoying that I'd rather use my G4.It's a great computer otherwise, I hope they didn't do something permanent that would require a new motherboard, that's not in my budget.
I've got this weird problem with my late 07 SR 17'' MBP, after I plug in the Magsafe charger the fans start spining and in like 3 minutes they reach 6000 rpm (both of them) and stay that way until it's finishing the charge. I did the same exact tasks with my laptop charged and plugged in, and the fans stay around 2000 rpm, as opposed to when it's charging staying at full speed.
View 5 Replies View RelatedBrand new 2009 octo, with the 2.2x ghz CPUs. Turn it on, start NO apps. Let it sit idle. Within a few minutes the fans ramp up to FULL jet engine speed. I can't hear people on the telephone. And never stop. Let me reiterate that I am running NO apps. My load averages are in the zeros.
View 21 Replies View RelatedI've got a little problem with my iMac 24" 2.8 GHz Nvidia Geforce 8800GS 500GB. When I start it up, the fans start blowing at full speed. I checked the apple support page for support and found my problem with all the symptoms being correct. The support said I had to reset the SMC by shutting down the iMac, then removing the power cord and all the other one's, wait 15 seconds and then put the power cord and the other one's in respectively. I did this almost 10 times, but my iMac still won't stop making those annoying noises. Maybe it has to do with the SMC fancontrol app my brother installed lately.
View 2 Replies View RelatedMy PCI bay fan is running at full speed no matter what. The temperature sensor reads correctly in OS X, so I don't think it's a bad sensor.
Is there any way to set the fan speed manually, say in openfirmware?
It's a 1.8 DP June '04; I've ran ASD 2.5.8 to calibrate and test the mobo, which passed.
I have a 1.8Ghz dual processor G5, 1GB Ram, 80GB HDD, with OS X 10.4.7 installed and all current updates, and today I was working on it and the fans on it slowly started speeding up, and then everything on the screen disappeared and a mesage appeared stating that a restart was required. After restarting everything seems to be working fine, but I'd like to know if this is a fluke or if I have a serious problem.
View 12 Replies View RelatedI have a 24" mid-2009 iMac, bought in June. It's behaving oddly over the past week or so. It fails to wake on sleep on the first attempt, but always succeeds on the second. When I say fails though, I mean that it *does* wake up, but goes back to sleep again after a few seconds. The other issue happened today, when I woke it up, in a cold room, the fans started up at full speed (I assume). It sounded terrifying to me as my iMac has never got that loud - not even playing games. I restarted it and it was the same, but died down after a while.
View 3 Replies View RelatedSo today I opened up my MBP to clean it out and stuff (it had a ton of dust... A wall of it had built up where the fans blow out)All is fine and dandy now except for one thing. Since I don't want to open my case up for the second time today (right fan wasn't plugged in all the way first time I started it up... oops x( ) I'm asking here since everything else seems to be fine.
What I did:
Opened everything up all the way down to the heatsink.Applied correct amount of Thermal paste.plugged everything back in (right fan wasn't perfect at first, but fixed and stupidly didn't double check everything else while I was in there)
And now both fans are running at 6k (full) constantly. I tried resetting PRAM and SMC with no luck. I'm about to grab my disk 1 and run the diagnosis to see if that turns up anything.Are there any plugs that I might have accidentally not plugged in all the way or at all that would cause this? Also any other suggestions if everything is plugged in correctly?
MacBook Pro 2,2 15.4" late '06
10.6.3
C2D 2.33GHz
2GB Ram
Also, I have iStat Menu. No apps using all my CPU (Mostly <10% usage right now) and temp is mostly <40c right now. All temps have a temperature so I'm assuming all heat sensors are fine.On a great note: My computer is so much cooler now! Even before this at 6k rpm I'd get down to MAYBE 45c if I was lucky.I also have Fan Control installed and it's not having any effect
Does it hurt the computer... If the computer is doing something (watching flash, playing a game) that turns on the fan full speed;Does this hurt the computer? There are a few games I like to play and they turn on the fan at full speed (computer gets hot too, on the bottom.)
View 1 Replies View RelatedThe other night, my MacBook Pro's fans started running at high speed when the computer was asleep. Loud enough to wake me up. And this just kept on going until I finally decided to turn the computer off. Is this normal? Is this anything to worry about?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.3)
My iMac (intel core duo) after a hard drive replacement seems to be running the fans at a high rate of speed. Usually just a few minuets after startup. Before the upgrade they were almost silent and now they are very noticeable. I need to get taken care of or just a result of installing a larget hard drive?Â
Info:
IMac Intel Core Duo, Mac OS X (10.4.10), Ipod 30 Gig, BMW IPod Integration, .mac
My computer sometimes turns off when in screensaver/ sleep mode. Then it doesn't want to turn back on. It eventually does. It's annoying!
View 3 Replies View RelatedWhile working on the computer, sometimes the screen will turn gray (from top to bottom) and a message will appear saying the computer must be restarted.So far the local Apple store has not been able to find the problem. The last solution the store tried was to replace the Airport Card, but that didn't work. Computer was purchased in December 2011.
Info:iMac (27-inch Mid 2011), Mac OS X (10.7.2)
Our iMac is 18 months old and three times in the last few months the fan has switched on at full speed as soon as I press the power button. If I disconnect the computer from the power source and turn it upside down before reconnecting and starting it up, the fan will then work normally. Has anyone else had this problem? I guess the answer is to take it to a service centre, but I thought I would see if there is a simple resolution to the problem first.Â
Info:
iMac, Mac OS X (10.7.4)
I have a 27" iMac that I recently took to the Apple Store to have the LCD replaced. When I got my machine back and started it up, the fans kicked on full speed and will not stop...this didn't happen prior to me taking it to repair...it ran nearly silent.My firmware and so forth is all up to date.... I downloaded SMC Fan Control to see what was going on... my computer is operating at 97 degrees farenheit. but my CPU fan is spinning at 4035 rpm. That's crazy over the top. Optical drive fan (with no disk in it) is spinning at 3736rpm...and my HD fan is at 1098rpm (which is probably about right.Â
Info:
iMac, Mac OS X (10.7.3), 27" i5 2.66 Ghz, 8 gb RAM
My iMac runs perfectly fine; more or less as it did when it was new. In OS X, when I shut down the computer, the fan runs at full speed indefinitely, unless I unplug it or boot back up. When running, the fan is perfectly normal (increases speed a bit when doing something taxing). I've never heard it at full speed before until this started happening. After following the SMC reset procedure with no luck (I'd like to add that the SMC reset only says it relates to fan problems when the computer is ON), I searched a bit and noticed there are one or two cases where a problem like mine was believed to be a motherboard issue, and therefore a costly fix.Â
However, here's the fun part. When booted into Windows 8.1, shutting down the iMac does not cause this issue to occur. It stays silent, as it should, even if I disconnect then reconnect the power. This leads me to believe it's unlikely to be a motherboard issue. However I've wiped, restored, and reinstalled fresh copies of Mountain Lion, Mavericks, and Windows 8.1, and the result is still the same: if I don't want to have to unplug it from the wall, then I have to use Windows to shut it down.Â
So then, my questions are these:
-What is the difference between shutting down from OS X and shutting down from Windows?
-Is an operating system allowed/able to touch BIOS settings?
-Is it possible to still be a hardware problem, given this difference?Â
My default OS is OS X, and it makes no difference if I change that to Windows. I also did a PRAM reset, even though that has nothing to do with fans...
Info:
iMac, OS X Mavericks (10.9.4)
I just bought a Macbook Pro 13" (the high end). I'm mainly gonna use it for text editing, internet, watching movies, some photo work, music etc. But I would like to play a game now and then so I bought the new Diablo 3. I know the computer isn't made for gaming and lacks graphics due to the intigrated graphics card. Despite this I am able to play the game, but the fans turns up to 5000-6000 rpm. I was just wondering if I'm gonna reduce the lifespan on the computer (especially thinking about the battery) a lot - or if I shouldn't worry.
Info:
MacBook
Pro
I am interested in adding a webcam to my desktop Imac (power pc)- Isight is no longer available- an option that I found is the Ecamm Image- but apparently it is USB and not firewire and it will only run with high speed usb- how do I know which type is on my computer? I checked system profiler but quite frankly wasn't sure of the designations.. does anyone have any experience with this camera, by the way? is USB 2.0 by definition "High Speed"?
View 6 Replies View RelatedI recently was given an old 2x1.8Ghz PPC G5 in order to build a personnal server but I have troubleshooting with CPU's temps that are really too hot (75?C with no app open, only Finder).
I know these temps are not that "hot" but I can't imagine what it would be when I'll open Safari, iGetter, iTunes, CyberDuck, Adium and Photoshop CS4...).
I first unmount everything, blown inside some bottled air to make sure there were no dust creating overheating inside and remount everything.
Installed Leopard (last OS installable on PPC machines), made the last updates possible and restart.
Everything is working well althought this CPU's temp is so damn high and fans's speed are still at 300rpm. I was looking for some app that would do the same as SmcFanControl for Intel based Macs but for PPC's ones.
After many internet searches on many forums I finally admitted there were no software able to set fans's speed, the only way was manually editing the AppleFan.kext integer's values.
WhatI did, reducing the integer values to lower rates (256x multiples), then restarted the Mac but nothing happens. As I check the changed values, they indeed are the ones I edited but the fans still are at 300 rpm and the CPU's temp 75?C...
Does somebody have any solution for that issue, I feel I checked everything that was possible but nothing seems to work.
My PowerMac G5 fans hardly ever speed up. I mean they certainly never go full speed or ever close how they sometimes behave on start up. I never get the jet speed noise. Even when I am rendering a movie in FCP, I hardly hear the fans. Right now on idle, iStat pro reports CPU A being 58C and CPU B being 56C. Yet, the fans are still only 400RPM both CPUS Intake/Outake.
View 4 Replies View RelatedMy CPU heat sink fans always run above 2000 rpm. Is that avoidable?
Can I do something about that to drop the speed and get rid of the noise?
During the summer, I don't have A/C in my house. My temps were getting pretty high, around 55C/130F for processors and up to 78c/172f for ram. That is pretty high, and I suspect it is because the ambient temp in my room is somewhere in the 90s. I am just very acclimated to the heat, and it doesn't bother me.
I downloaded SMC Fan control and bumped the min fan speeds up to:
1250rpm for Exhaust
1150rpm for CPU
800rpm for Power Supply
1350rpm for HD
This has made a tremendous difference. CPU is down over 20C and ram is down about 30-35C. Are these fan speeds safe? What are the Mac Pro fans rated at, and will the increased speed shorten their lifespan? I'd like to keep these current fan speeds if it is safe.
I have a MacPro 2.66 quad-core intel. 4gb ram. I have a hard-drive from my old Powermac that i upgraded to 10.5.5 for this computer. Everytime I put my computer to sleep, and then wake it back up. The fans spin up to maximum speed and all the fans are running really loud and then after about a minute all spin to normal speed.
View 6 Replies View RelatedI have a late 2007 macbook pro and recently the fans have been going at extremely high speeds without the MBP being hot at all. I have SMCFanControl and iStat Pro and both of them said my MBP's temperature was around 55C though the fans were going between 4000 and 6000 RPM, I also checked the activity monitor for high CPU usage but nothing high there. I turned my MBP off for 5 minutes with a fan blowing on it just incase it was hot but when I turned it back on the fans immediately jumped back up to 6000 RPM. They're back to normal now but I assume it will happen again. Anyone know what's wrong?
View 12 Replies View RelatedI was just wondering if it's okay to run the MacBook with the max fan speed (6200RPM) at all times? It's really hot nowadays and my MacBook runs at about 60 degrees Celsius idle. If I run a few CPU intensive apps, the temperature usually rises to 70-80 degrees. This is with the fan running at max speed. So what I want to ask is, will it be okay to keep the fans running at max speed at all times? I'm going to get a notebook cooler soon so that should help with lowering the temperatures a little lower.
View 17 Replies View RelatedIf you are watching HD video, CBS.com HD shows for insteance.What speed are your fans running then and what temperature does your MBA Rev B have?
View 6 Replies View RelatedI've bought a brand new MPB 15'' about 2 days ago.Â
Every time I put it in sleep mode (by closing lid, or manually choose Sleep from menu) it goes to sleep (I check it by front indicator), but FANS STARTING TO ROTATE AT MAX SPEED (Sorry for CAPS)Â
I've already reseted the PRAM, reseted the SMC. Turn off any sharing. But that did not help.
Info:
MacBook Pro, Mac OS X (10.7.3)
My Early 2008 MacBookPro 2.40 ghz 4 gb Ram OSX Mavericks machine's keyboard backlight off and fans run at high speed; it seems an exact smc resetting problem.
So i tried the 2 ways of SMC restting procedure; both battery you can move and not, but nothings changed on the situation..
On the way for removable battery; nothing changed but on the way for umremovable battery way; keyboard backlight flashes and gone, but fans are at high speed not changed. So nothing changed.
