iMac mid 2010 i3, I replaced stock hdd to a two terabyte western digital caviar green. After replacing the fan speed rapidly increased. I installed smc and still no resolution.
Info:
iMac, Mac OS X (10.7.3)
I installed (and subsequently uninstalled) two different fan control programs... Since then, my fan speed has increased somewhat dramatically. Instead of the normal 2000 rpm (approx), it now runs at 3500 to 4500 rpm with CPU temps between 55 & 65 deg. C. I'm wondering if one of the programs modified some fan setting and how I can restore the factory defaults. I'm on a Macbook Pro OSX 10.6.8 *additional note: I only have one fan running (left fan), which is why I downloaded the fan control programs in the first place... but the left fan was running at around 2000 rpm even though it was the only fan (until I installed those programs)
Info:
MacBook Pro, Mac OS X (10.6.8)
I'm running an 8,1 MacBook Pro and just upgraded to 10.7.4. While idle, my CPU temperature now stands at around 180 degrees Fahrenheit and my fan runs at 4000+ rpm.
Info:
MacBook Pro, Mac OS X (10.7.4)
Normally when I shut power off my MacBook Pro, it takes about 4-5 seconds and then its off. Since I installed VMware Fusion yesterday, it takes about 1 minute to power off. What is going on? I read somewhere that when you quit a virtual machine you need to choose "kill all" to stop any background processes. How do I do this or is this just normal.
View 3 Replies View RelatedSo the latest beta is apparently 64-bit to begin with. I've also noticed that it uses more RAM than the previous (beta) versions, which is quite disappointing. It now uses up even more RAM than Safari!! Has anyone else noticed that?
I also don't like the the new "page loading" status because it doesn't tell much - seems like a copy of Chrome's too. I preferred how it was in the previous beta version.
I recently bought a 12" Powerbook G4 from ebay, and am curious to know about the battery capacity. It came with the original Apple battery, and it usually powers off before the battery is at a low percentage power. So I have installed Coconut Battery and Battery Health Monitor to check how the battery is doing.
Both say that the battery capacity is now 6393mAh, and the original capacity was 4200mAh. As such, they say the battery health is 100%. How is this possible? How can battery capacity increase? I presume this is wrong. Is there any way to correct this? The powerbook, according to the apps, is 65 months old (it is an original 867MHz model). Both battery apps also say the battery has gone through 59 charge cycles.
I just got a new 21.5 inch imac a few days ago and I used migration assistant to move everything from my macbook. It displays .avi files that are really 350 mb as 366 mb. Why is this happening ? and even when I download new ones that are 350 mb they show up as 366 mb. Before I used the migration assistant I used this plug in for quicktime called Perian on it when it was brand new, but I think its erased now cuz I transferred all my data.
View 5 Replies View RelatedAfter a catastrophic HD crash I bought a small 250GB external hard-drive an started to use Time machine. Since my Mac was freshly formatted, I tend to keep it tidy and clean and keep good track of what comes in. I noticed my time machine backing up 15 GB of data which allegedly would have been added within two days. I could absolutely not trace this on my computer nor when I compared current folder contents with the most recent backup. Downloads, Apps., System are all excluded from my time-machine and couldn't represent such a dramatic data increase on my separate HD.
View 2 Replies View RelatedI have SL installed since the release day and I've noticed that for some reason my hard drive is a lot more active than it was before. At first I thought it was indexing something (such as the spotlight index that needs to be built) but this has been going on for days now. Even during very light computer work (just one firefox window with macrumors) de disk still keeps going like crazy. It's not constantly, but definitely way more frequent than on leopard.
View 9 Replies View RelatedSpam has greatly increased in my inbox. It was not a problem before. How can this be improved?
Info:
MacBook Pro with Retina display
My f1 - f12 keys have seemed to adopt a new function. When i use f12 to increase the volume it will also act like i am pressing f1 and simultaneously dim my screen. When i press f1 to dim my brightness it will also increase my volume. When i press f2 to increase my brightness it will also "press" the tilde key and vise versa. These are only a few examples and it seems that all my f1-f12 buttons have adopted a secondary function.
15" Macbook Pro Retina running OSX 10.9.3
After updating to iTunes 10.1.1 the app did not start at first so I went to download it and installed it manually. iTunes works but my boot time went from ~2 wheel turns at the boot screen to ~16. Installed the new airport update, as well. I repaired the permissions and did a PRAM reset.
View 1 Replies View RelatedWe have realized she needs to upgrade to 10.6.3 Snow Leopard to use Java and other features. I have a Mac Snow Leopard disk that a friend loaned me to find out how to reset her password a few months ago. Can I use this CD to upgrade her 10.5.8 Mac without her having to buy anything?
Info:
iMac, Mac OS X (10.5.8), It is a desktop, assume it is iMac
Ever since I upgraded my Macbook Pro (mid 2009) dual core from Snow Leopard to Lion, the start up time has increased significantly, and the battery life seems to be lower than it has ever been. It has been several months since I upgraded so indexing is not an issue. What should I do, and how can I get back my missing battery life that Lion took away? And how can I make my reboot and startup time faster.
Info:
MacBook Pro, Hard drive
Can I upgrade my G5 dual 2.0 with intel chips? I am really feeling hurt, that I bought a MAC and then Apple "upgrades" there Mac with intel chips. And what hurts eben more is the games now coming out are only for Intel Mac's only. I am not a hard core gamer... but I would still like to play a couple of the new games coming out.
View 11 Replies View RelatedI have an iMac running 10.4.11. I want to update the system all the way to 10.7.3
Is there a combo 10.7 I can install, to skip 10.5 & 10.6?
Info:
iMac, Mac OS X (10.4.11), 512Mb Ram
imac was noticeably slower to boot and after leaving the sleep mode stops working dock
Info:
iMac, Mac OS X (10.7.4)
I have an iMac white intel-based dual core2 which has been sitting untouched since purchased Sept 2006. Trying to upgrade everything.
When I try to upgrade to Lion it says I need Snow Leopard first so, using Safari, I try to buy Snow Leopard and Safari crashes. Safari is 3.0.4. So I try to upgrade Safari but it says I need Snow Leopard first.
Info:
iMac, Mac OS X (10.4.11)
We are using Mac OS X Version 10.3.9 with a 1.25 GHz PowerPC G4 here and cannot upload the latest version of Safari, Skype, Quicktime 7, and are having difficulties with an airline booking website - probably because of the above. Would like to upgrade to Snow Leopard but this OS want us to have an Intel processor (think?) so not exactly sure if this is possibly because of the version of Mac processor we have.
View 4 Replies View RelatedI want to upgrade the ram on my imac (2010,ram:ddr3 1333)now my mac has "4GB 1333MHz DDR3 SDRAM - 2x2GB". I would like to know if I bought an extra 2 x 4GB RAM. Can I put them side by side (4 slots) in the iMac for a total 12GB of RAM?could this mixing (2x2G+2x4G) be dual channel?
Info:
iMac, Mac OS X (10.7.3)
I have a Mid 2011 iMac and have been thinking about replacing the hard drive with an SSD drive. What sort of considerations should I be aware of? In particular: Is there a specific SSD technology I should be looking for (brand, connecter, etc.)?Can I use an SSD drive for the OS and the existing HD for additional storage? If so, whats the best way to separate the data (where do apps go, etc.)?Is it something that I can do myself or does it require taking it to a repair shop?How does it effect the warranty?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
I operate an iMac: v 10.6.8, 8 GB, and ample space.
I have checked all the requirements for Yosemite, but nothing happens when I click on the download button.
All the links I've tried so far take me around in circle
if it was possible to swap out the first intel processors with the newer ones the imacs are coming with. i found this info and mainly looks just as tricky as open heart surgery to risk my imac doing, and thats just replacing the processor itself.
View 10 Replies View Relatedif I like to upgrade to Lion - do I really have to buy Leopard as well as Lion - only to install Lion?I bought Leopard already and thought I could upgrade easily and free to Lion. Actually I have installed Leopard 10.6.8 and now it seams that I have to buy Lion to be able to upgrade.
View 7 Replies View RelatedCan I upgrade the HD in my late 2009 iMac 27 to one of the WD Caviar Green 3tb drives? I am running Lion and all of the latest updates are complete.
View 5 Replies View RelatedCurrently I have an iMac 10.5.8 with an Intel Core 2 Duo and 2Go Ram. Since January I didn't had much system updates because my software is apparently too old ... And I am kind of paranoid about the Trojans that I might have because I use the old version plus Safari is getting blocked very often. So I decided to by first Snow Leopard and then Lion. The thing is that I live in Norway & I will have to use the Norwegian apple store to by those programs but my OS X is in French. So I was wondering if I will be able to choose my language or the whole system will be automatically in Norwegian? The second question is to know if it is difficult to upgrade? I am a Mac user because I don't have any clues about the computers and Mac is always working. I read some complaints from people who after installing Snow Leopard couldn't use properly their printers or other apps... Is there is something I (completely ignorant person) should be aware of before doing the upgrade?
Info:
iMac, Mac OS X (10.5.8)
I received the Snow Leopard upgrade disc from Apple. The instructions read to simply upgrade to SL version 10.6.8 after running the installation disc, and then to purchase the Lion upgrade from the Mac App. However, this SL version seems to be 10.5.8, and none of the 10.6.8 or lower updates will work. I found a 10.6.1, but that won't install either. They all say that I need OS 10.6 and I can't find it. I have a 2009 iMac with an Intel Core 2 Duo processor.
Info:
iMac (20-inch Early 2009), Mac OS X (10.5.8)
I have a Power Mac G5 2.0 GHZ 1 TB and 250GB Hard Drive, 4 GB of Ram Running 10.5.8 Leopard. Now i bougth this mac on ebay to EDIT VIDEOS AND PICTURES. BUT, i cant do either because all the editing software requires snow leopard or higher. the Mac doesnt even have I Movie, Garage Band. To get any sort of editing software i need snow leopard. To get snow leopard i have to have an Intel Based Processor MINE ISN'T INTEL. So pretty much i have NO WAYS to edit or create videos.
Info:
PowerMac, Mac OS X (10.5.8), 2.0 GHZ, 1.2 TB.
Basically, I want to make my games run alot smoother. And just being honest, the default graphics card is awful. I want to run more graphic intensive games. I've read that the graphics card slot is small, so it can't run great graphics cards. I understand this, but I believe the current one I have (ATI Radeon HD 4670) is 512mb, I'm looking for a 1 GB or 2GB graphics card. Is that possible to run in this machine? Money isn't a problem, I got Bootcamp to speed up my PC, that sorta worked. But I need a graphics card.
Info:
iMac, Windows
7
I have a Time Machine 1.2 which worked perfectly on my old iMac OSX. A few months ago I purchased a new iMac which came with Snow Leopard, and it worked well. But when Apple came to upgrade me to Lion, the Time Machine no longer works. Is it not compatible with Lion??
At one stage I was told there was no room on the disk. I then tried to delete most of the previous backups, leaving only a handful of backups - but still no luck. I think I might have messed up things by then trying to edit the "do not back up" list. I tried to exclude some programmes applications , and now I am told there are no disks available to be backed up.
It is not very clear on the "options" screen, what one should do. What does the + and - indicate, and is it necessary to remove any files at all if I want a simple regular backup procedure on my home computer.
Lastly - if I wanted to uninstall and reinstall the Time Machine - is there a procedure?? I can't find one.
Info:
iMac, Mac OS X (10.6.7)
