I just got my S2409W in and am now running my MBP to it via DVI and PS3 via HDMI. When switching to HDMI input, the PS3 video is fine, but no audio.
I have my desktop Labtec 3 piece computer speakers hooked up to the audio out jack on the monitor. In the settings on the PS3 I have audio output via HDMI and on the monitor I put "Line Out Source" as "PC Audio"...is this correct?
I have narrowed down my options for an external monitor for my MacBook Pro.
I don't mind the glossy screen on the HP - might actually prefer it as I have been using an iMac for 2 years.
What would the best choice be out of these two monitors?
I could also get the 2309m instead of the 2159m for increased screen size.
I'm looking for a new monitor to go with my MBP, and I'm stuck trying to choose between the ones listed above.
The 2407WFP is a couple of years old now I guess, but it's the rev A04 version, which supposedly fixed the (few) problems with what was otherwise meant to be a great screen. It's an sPVA screen.
I've heard good reviews of the G2410, with its LED backlighting. It's still a TN panel and I hear so much bad stuff about them.
The 2209WA is an eIPS panel which I like the sound of, but it's smaller and lower resolution.
The F2380 is a cPVA panel, the image quality looks better but I've heard bad things about blacks on this panel.
I have an HP Photosmart printer connected, via USB, to a PowerPC Mac. The Mac has Bonjour on it and it acts as a print server to a Mac laptop and a Dell laptop. Until recently, everything was working fine. Now, however, when I try to print from the Dell laptop, I get a pstopdffilter error message. I can still print from the Mac laptop.
View 1 Replies View RelatedI'm trying to get my Dell 3000cn printer to work with Mac OS 10.3.9. I cannot get the printer to work with the generic PCL 6 driver.
I'm an IMac newbie, so please excuse me if this is "old" information. However, I've done a lot of searching and can't find a "simple" solution. Maybe there isn't one. Again, please excuse me if this is dumb...Just got a new 27" IMac. I have a Dell AIO 966. I know now there is no OEM driver. But, I thought there was a Lexmark driver model (that might show up in the OX 10 install process I could substitute, or a Generic driver. So far, no luck. And frankly, some of the things I am reading when I search are either old, old posts or too complex for me.
Is the simple answer, "get a new printer?" Or, is there a usable driver loaded into OS X? Is there a thread or post that I am missing?
Can anyone suggest what should I do with Mac Mini 1,83 GHz Intel Core 2 Duo and my two new Dell monitors?I tried them using their standard VGI cables connected to a VGI port on a Mac Mini - both are dead. Not a single flicker.
My Mac bought from a trusted friend and acts as a practically new machine - but not with my monitors.
P.S. I went through several Mac-related forums and there's abundance of issues with "alien" monitors.
I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
I hooked up my macbook pro to a mini display port to a dvi -> hdmi to my tv no problem. However, when I hooked up the mini display -> dell monitor, I get nothing. The screen is black. The weird thing is that my macbook pro recognizes that a second monitor is plugged in... it just won't display anything
View 9 Replies View RelatedI've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
I recently purchased a Macbook 2.13 GHz Intel Core 2 Duo. I've tried to burn audio cd's from mp3 in Itunes to use in my car but when I try them in the car cd player they don't work. But they work on my mac. I used to be able to do this on my old mac mini with no problems. I'm running the latest version of OS X.
View 6 Replies View RelatedSo i have a MBP late 2009 edition and I bought the mini display port with hdmi to connect my mbp to my hdtv, everything works cept there is no audio. I even checked the system pref and everything.
View 4 Replies View RelatedI just took possession of a C2D Mini. I am unable to get digital audio to work so far. I use the same cable and receiver connections that I use on my 2009 Mini so I know they're good, but nothing. When I plug the cable in, it mutes the internal speaker, so it's detecting the audio cable. System Prefs > Audio shows digital audio, and won't let me adjust volume as I'd expect. I've tried a shared iTunes library as well as web based audio, but no luck.
Connections: DVI-HDMI converter out to a 32" 1080p Sony TV.
Digital audio with mini-toslink to receiver.
Power, LAN, Apple Keyboard. Nothing else hooked up yet.
Running 10.5.8.
I am using my MBA with an old Dell Inspiron laptop (running Vista) for the optical drive when necessary. I've installed software using remote disc with no problems (reinstall of OS, then Sibelius music notation software). I assumed I would also be able to read audio CDs or DVDs using remote disc, but every time I have tried this it doesn't work. The connection is fine, but the MBA is unable to find the data - one message I've had says it cannot find the original source (or something like that!). Does remote disc only work for software? Or might there be a way around this? I don't particularly want to use iTunes on the Dell as it's set up with my wife's account and even plugging my iPhone into it got it all confused.
View 1 Replies View RelatedI am tryinng to convert a video with visual hub, and it keeps saying that it cannot convert the video because the audio track is not recognizable.
View 2 Replies View RelatedI have a 17" MBP. The last model with the silver keys. I seem to have picked up an annoying sound effect that plays itself at random. Actually its two. A door opening, then a door closing. I have deleted my browser history & cookies but its still there. Where can this little bugger be found and how do I banish it forever?
Info:
Macbook Pro 17, Mac OS X (10.5.6)
I was recently on the alltel website trying to preview ringbacks for my phone and when I try to listen to the audio, a little box pops up saying that it "has content of MIME type �application/x-mplayer2�. Because you don�t have a plug-in installed for this MIME type, this content can�t be displayed."
I downloaded the flip4mac WMV to see if that would help and there's still no change. I then went into system preferences, under quicktime and in the advanced setting I made sure that streaming, video, audio, MPEG, MP3, and miscellaneous were all checked and enabled (this being under MIME settings). Still I'm not able to preview the ringback audio on alltel's website. Is there something else that I may not be doing right?
I am frequently unable to play videos using Flash in Safari as of late. I get audio and no picture or get a picture & audio with a request box for permission to store info locally from various sites. Have reinstalled Safari, Flash and Java, what should I do?
Info:
iMac, Mac OS X (10.7.3), Flash plays in other users on iMac.
For some reason, I can't get Logic Express 8 to output audio to my Mac's attached speakers. It outputs fine through my M-Audio interface, though, but I'd just like to listen without headphones.
I listen to and watch a lot of podcasts. Quite often, after I am done listening to a Audio Podcast I will watch a video podcast. Some times it gets stuck and won't play the video but plays audio fine. Anyone else have this problem?
View 1 Replies View RelatedI want to hook my Macbook Pro up to a Sony Bravia (not sure of the exact model). I went to the Apple Store, and was given these two items to hook it up. Moshi Mini DP to HDMI Adapter with Audio Support. Belkin High Speed HDMI Cable - 6 feet
We successfully hooked it up last night, and the video worked. I was told in the store that this setup would not transfer audio, so I already knew there would not be sound coming from the TV, rather from the Macbook instead. My Q is: What's the easiest way to get audio to come from the TV? I'd rather not buy external speakers to plug in, if I can help it.
When I use some powerpoint presentation containing audio-visual info keynote always seems to prematurely end the audio part. Have tinkered with it a little, but can't seem to sort it out
View 1 Replies View RelatedTrying to figure out if something is up with mine and a buddies machine specifically or they are all buggered....
Please post if you have an audio pop or click type sound that is intermittent (every few minutes or couple hours) on your i5 or i7 machine while playing audio through external speakers.
If you have it, please describe your situation as it occurs so we can perhaps isolate it:
I.e. Plugged in / on battery, programs running, usb plugged in, etc.
Mine happens whether on battery or not, iTunes, games, movies, Locked in video card...
I want to convert some video files (specifically swf in this case) to audio files so I can listen on my iPod. I looked everywhere and can't find some free software that does that. There are tons that have trial periods with lots of limitations (like it won't convert anything larger than a 5k size file) so I don't want those because I won't know if the thing works well unless I pay for it. I'm not opposed to paying for a converter IF I know it works awesome on a Mac.
View 3 Replies View RelatedI have searched a lot for this question and have not found an answer.
I am trying to play a .avi video on my MAC that was originally in .rar compressed format. I opened it in VLC, and the audio wont play.. so i checked the info and saw that:
video codec: XVID
audio codec: mpga
I have perian downloaded.. it doesnt seem to be doing anyting. I dont know if i've missed something in my extracting process of the .rar file.
I have attached my Mac mini to my Sony TV (to use as a moniter) - there hasn't been any trouble with the picture but I cannot get any sound.
I am using a VGA (I know that doesn't send audio over) plugged into the 'PC In' port at the back of my tv, and I am using an audio cable with a normal headphone-type jack on one end (going into the headphone port on the back of my mac mini) and the red/white cable going into the HDMI-in red/white ports on the back of my tv. I can't figure out what is going on - I tried plugging the red/white cables into all the input ports on the back of my tv, just in case, but no luck.
Info:
Mac mini, Mac OS X (10.4.11)
I'm using iMovie 09 with the very latest updates applied and I am having trouble with audio skimming in just one of my projects. The project is only 8 minutes long and is just a collage of pictures to music.
The audio skimming button is toggled to on but no green bars show in the equalizer when I skim over the video. The audio works fine when playing the project and in other windows around the project such as the event viewer. I have plenty of free hard drive space and the thumbnails slider is set to '5s'. ALL of my other projects skim no problem.
Now this is the strange part. If I click to enter the precision editor on any part of the video and then click done (even without altering anything) the skimming comes back. It thus disappears if place a new item in the timeline until I go back into the precision editor where it re enables itself.
- Volume is at max
- System Prefs>Sound>External Speakers>Volume Max>Not Muted
- No red light coming from the headphone jack
- Tried inserting and removing headphones, no sound in speakers or headphones
- Restarted computer while holding down ⌘ + OPT + P + R , no sound made
- A very very faint feedback, like when you plug an electric guitar in to an amp, can be heard when the first sound (the mac start up chime) is supposed to play on restart
- USB headphones work
With the new Mac Mini models, you can have audio out via HDMI or the line out. I am thinking to hook the mini up to an LCD TV/monitor via HDMI (sound on the monitor) and also to my other TV/sound system via the mini DP and audio out.
I assume when the mini turns on it'll activate both displays (if they are turned on), and from what I understand you can have two displays running. I'd only want one at a time so I'd have the other display switched off. But can the mini output audio to either both, or whichever system I am using? I've read a lot of posts but can't find a definite answer. I only want audio (and video for that matter, but can turn off other screen) to one TV at a time, but do I have to go into the OS audio settings each time I want to swap between the two?
I'm also thinking of using Plex and keeping it open at all times, just sleeping the mini when not in use. Can the mini only output to one source, requiring manual switching to the other (i.e. going from HDMI to audio out)?
The volume controls aren't working well. I'm using a M-Audio Firewire Audiophile external sound device. There seems to be a headphone level control on the left which sort of works (its continuous so you never know where you are in its range) and a "Level Controller" on the right which doesn't do anything to the sound yet it controls the sound bar in Sys Prefs/Sound. I downloaded the 10.4.11 driver from M-Audio.
View 2 Replies View Related