I have a PC laptop harddrive that I'm trying to mount to my MacBookPro. The enclosure is homemade and powers the slavedrive up (I can hear it spinning) But nothing pops up on my desktop. Systemprofiler recognizes that a Lacie drive is hooked up via firewire and I positive that my pc slave drive is setup in slave mode.
Does the mac hard drive need to be set so it can accommodate a slave drive?
I am very new to Mac, and heard somewhere that I could use my new MacBook to open my old beat up PC and transfer the files onto the Mac.
View 2 Replies View RelatedI have what may be an odd question. I had a Seagate SATA hard drive inside of a Lacie firewire400/800/eSATA external enclosure that recently got zapped in a power surge and stopped powering up. It has a bunch of film files on it, but no operating system. I put it in one of the extra drive bays inside my Mac Pro, and I could hear the drive spinning when I turned the Mac Pro on (usually it's really quiet, but it now had the unmistakable LOUD spinning of the Seagate), so I can tell that the drive itself is not dead. BUT, the Mac Pro decided to try to boot from this drive instead of its own drive. So it wouldn't start up at all, seeing as there's no OS on the seagate drive. I know there are no master/slave settings in Mac Pros, so I'm not really sure how to go about setting up an internal drive w/o an OS on it, in a Mac. I just want to be able to copy the uncompressed video files from the seagate drive to the Mac Pro's hard drive, then remove the seagate drive
View 5 Replies View RelatedI updated my G3 today to 10.3 finally and everything was working great until I updated software to 10.3.9 now my wireless isn't detecting any signals while it was working before the update. I'm thinking a driver was broken any ideas. It's a linksys wireless adapter I do believe.
View 1 Replies View RelatedSo I just installed two drives in my PowerMac G4 MDD. Using cable select to install them, I have the boot drive installed on the middle of the ribbon between the Mobo. and the end. The slave drive is on the end of the ribbon. Now when I open Disk Utility the slave drive is first on the list on the left followed by the boot drive. I thought it should be the other way around. Also, when I option click on each drive and click on information the boot drive is tagged with disk1xxx and the slave has the drive as disk0xxx. That doesn't sound right. Does it? ALSO strangely when I FIRST set the drives up and opened Disk Utility the BOOT was first in the list and the SLAVE was underneath, but after a restart they went the other way around. Can tell me what's going on? or anything to worry about? I will be doing frequent backups on the boot drive so I don't want any issues later.
View 1 Replies View RelatedI've been having some problems lately and I assumed it may be related to my HD since it's been making a lot of creaking noises for a while. Its been freezing a lot and when I click on folders they won't open and the text underneath starts flashing. Yikes. I've never come across that one before so I started booting up off the slave drive. Well just now the same thing happened with the text flashing running off the slave. Could this somehow be related to the master drive failing or do I just have other bigger issues?
View 4 Replies View RelatedIs there a way to get fsck to recognize a 200gig internal on the slave bus?
It seems that fsck only recognizes the startup drive.
Stellar Phoenix shows all the files are there but I cannot mount the drive through Disk Utility and I can't afford $99 right now.
I bought a brand new Seagate 400Gb hard drive for my PowerMac G4 MDD FW800. I installed it in the back bay, as a slave drive. When I power on the Mac, I get a blank grey screen. The original hard drive with OS 10.4.11 is set as the master, so I don't know why it won't boot properly. I've checked for bent pins, and I don't see any obvious ones, so I'm completely confuzzled.
View 1 Replies View RelatedI am buying a used Powermac, G5 Dual 2GHz. It already has a SATA 320GB HD in it but I want to use my SATA 160GB from my dead iMac. The only questions I have are:
1. Is there anything special I need to do installing the second SATA drive? Does the drive need to be set to Slave or Cable Select?
2. Because the 160GB (going to use for storing musc) drive has OS X Tger installed, will it be a problem when booting once I install both drives? The 320GB drive has Leopard (This will be my primary drive). Will it boot to Leopard and let me use disk utility for format the 160GB drive?
I recently performed an optical drive install. Had to remove the hard drive bays (I use three hard drives - Luckily, 2 run OSX). I carefully removed all three drive bays and the empty bay. When I inserted the drives into the computer I had changed the position, swapping one OSX drive with a different one and reversing the drive bays. On restart, the computer started on the drive I had not selected for startup and I received an error message stating the other drive could not mount and it gave three options (Initialize - Ignore and Eject).
I can see the drive in Disk Utility and repair the permissions (it's also located in the System Profile).
I tried a few things I read in the community using various Terminal commands but was unsuccessful.
(Let me point out that I recently switched from a PPC G5 to MacPro and swapped the drives from PPC into MacPro and all has been fine until I removed changed their positions in the bays)
Info:
Mac Pro, Mac OS X (10.5.8)
I tried searching for a solution for this and can't find any. I've seen one other threat in here about similar problems but the variables in my case are different. Here's the thing, a friend of mine lent me her usb pen-drive. She uses it on a pc mostly at work. When she gave it to me she forgot to copy some files i needed so she plugged it into her macbook pro (one of the new ones from this year, intel, snow leopard and stuff), copied the files i needed on it and i took it home. I have an intel imac, bought on april 2009. I plugged the usb pen-drive on my keyboard usb port and nothing happened. So i took it out, plugged it in again and nada. I did it a 3rd time and this time it showed me a message saying that this pen-drive needed more power and i had to try plugging it into a different usb port. So i plugged it in the back of my imac and nothing happened, not even the "insufficient power" message. It doesn't mount, won't show up in the desktop nor in the sidebar of a finder window.
I checked the disk utility and the pen-drive shows up there. I see the "main" pen-drive and it's "partition" (i dunno how to call it... mmm... you know, like you're seeing the "parent" drive and its "son" drive but they're "one and the same") and i can see its tech info and i noticed it's formatted NTFS. Since it worked just fine on my friend's macbook pro, i can't figure out why isn't it working in my imac. I know macs can't write NTFS, only read (mine doesn't at least) but hers wrote info in the pen-drive no prob. Another thing i noticed is that the "son" drive is grayed out. I can see its tech info but it's grayed out. Verifying the drive simply shows a message saying "Verify volume failed: Invalid request.".
So, i have no clue as to what's going on. I could give it back and ask my friend to format it as journal or whatever it's called to be mac os compatible and copy the info back again, but i don't know if that'd be a solution until i'm able to try it in a few days. Can't ask her to format it fat32 since the file i need is larger than 4gb, so yeah. Any clues as to what could be the problem? I even tried unplugging any usb peripherals and no dice.
I understand macs can mount .iso with a simple double click, but I want my macbook to treat an iso file as if it were a CD in the cd drive. This is easily done on a C with PowerISO or Alcohol120% I should be able to do it on a mac too, shouldn't I? But I can't seem to figure out how to. When I double click the iso to just mount it, it mounts fine, i can access files and everything, but if I run a program that reads of the CD i of course get the "Please insert CD". Now, I have the CD right here, that's no big problem, but the using drive kills the battery life like nothing else.
View 13 Replies View RelatedI have this sans digital USB towerraid enclosure, with one, 1TB drive in it. It's formated as NTFS. It was working just fine, but for some reason, I went to connect it to a windows machine today and it basically froze up the computer. so i tried a few things, and it was still freezing the computer.So i connect it to my macbook pro where it normally is, and when it tries to mount the device i get an error from NTFS-3G. I added an attachment of the error it gives. I tried inserting the command line it suggests in terminal , but it didn't really do anything. I'm not really familiar with terminal or how to use it fully.
View 3 Replies View RelatedI installed SL today and everything seemed perfect until I tried to mount my USB HDD it's a Maxtor drive inside the case, the case is produced by Lace.
The drive is pretty old like 3-4 years but it worked perfectly in Leopard.
It says I should check the drive with disc utility but when I do so it finds no faults.
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
I recently bought a Lacie 2big Raid drive with 2 x 1 TB drives for backup of my images (I'm a photographer).
Everything was fine, mounted the drive, formatted, and used SilverKeeper to transfer all my previous work onto the drive which was formatted with RAID 1 (mirrored).
The files all seemed to transfer across fine, size was the same, and I had a quick flick through the drive and images where all ok. So needing to use the drive that these images CAME off, I formatted that, and put that to use where it was needed.
So in summary I had the Lacie RAID 1 as my 2 sources of backup at this point. I thought everything was fine at this point.
Now maybe a few months on when I have to track back for files, I noticed quite a few folders had been corrupted, for example, opening a job folder, and every type of image file, jpeg's, tiffs, and PSD's would all say they are corrupt when I tried to open them in Photoshop. Some of these jobs where 20GB of RAW and edited images, all corrupt.
So, reading through my manual for the Lacie, it said I could remove the 2nd drive, without altering the 1st drives data.
With this I removed the second drive, trying to narrow out any problems with the RAID. Mounted the disc, same corrupt files.
I then replaced the second drive back to the RAID, which the instructions said was fine, and it would just rebuilt the mirror, so I left if for a few hours while it rebuilt the second drive.
Now my problem, the RAID has finished mirroring the drives, and now my MacPro or Powerbook won't let me mount the drive without formatting it which I obviously can't do, It brings up Disk Utility when the drive is switched on and wants me to format the drive to mount it.
I'm trying to access some files for a client on a Western Digital external firewire/USB drive on my MacBook Pro. The drive will not mount in Finder.
The upper level drive shows up in Disk Utility, but the partition of the disk I would like to mount (the only partition on the drive) is greyed out. I know that it's formatted for a Mac and has been accessed recently.
In Disk Utility, when trying to mount or eject, the an error comes up saying to use first aid. Verify and Repair Disk don't change anything though.
My Mac OSX does not recognize NTFS partition.By default, I know it should at least be on read-only mode but under Finder I see the drive not even being mounted.I went to Disk Utility to see the NTFS partition, the one I installed my Windows 7 on, but it says the format is in MS-DOS(FAT) whereas I clearly see it shows as NTFS on Windows 7.There are about two files sized as 8.50GB stored on that drive so that should prove it's not clearly formatted in FAT system.
View 8 Replies View RelatedLast night I heard a couple of clicks and my G5 OS X 10.4.11 Boot Drive became unresponsive, Shutdown. Was able to install System on 2nd Internal. Launched DiskWarrior, which found the bad drive and made Preview Directory. Before had a chance to copy all more clicking started, so Shutdown. This AM swapped the drives in the bays so The Bad Drive is now in the Lower Bay. However now Diskwarrior does not see the damaged Drive nor does Disk Utility.
View 6 Replies View RelatedI have an external hard drive (NTFS) hooked up via firewire to a firewire audio interface, hooked up to my Macbook Pro with OS X 10.6.4. I accidentally turned off my firewire interface before ejecting the hard drive. (I have done this before, it's hard to remember I have my hard drive on sometimes, and nothing bad has happened). When I turned the hard drive back on, the mac says "the disk you inserted was not readable by this computer." I can pick "Initialize..." "Ignore" or "Eject"
If I click Initialize, I can't repair the disk or anything because it is NTFS.I tried booting into Windows 7, and it does not recognize the drive either.
Disk first aid sees the drive but the "mount " button is dim. I am connected by a usb cable. I am using Lion 10.7.3.
I had been using the drive connected to an airport extreme. That configuration failed its connection to my imac. The drive is now connected now directly to the computer. .
Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.3), airport extreme
How to Mount a hard drive to MAC BOOK PRO?
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.7.3)
I'd like a script that will mount a firewire drive at a specific time (let's say 10pm) even if the computer is asleep. I can get the ID from Disk Utility.
Info:
iMac 2.4 GHz, Mac OS X (10.5.8)
Some years ago, before my actual iMac, I bought an Mac mini. This Mac mini was with my mother now. 'Was'? Yes, was. Because now she bought an MacBook Pro unibody and returned my old Mac mini.
Well, as I have nothing to do with it I started thinking on using it to help my iMac for processing.
I work with 3D, so this would be really helpful. The problem is: what I want is use the Mac mini as a real slave, and not to do an network rendering. Network rendering will require another monitor an mouse (at least).
But I'm kind of lost here, I have no experience with this kind of thing, so:
1st: I imagine I have to restore my mini and clear everything, because iMac will control it. Is this correct?
2nd: Is this possible?
3rd: Is this what Mac OS server does? If so, is there a cheaper option? I guess Mac OS Server has a lot of features I'm not going to use�
I was wondering... I have 3 old G4's, with each 1,25 GHz CPU, and each about 1 GB memory.
I'm working on an iMac 1,87 GHz, 2 GB, and Intel.
I am composing music on the iMac, wich goes without problems. But I'm also writing music for video, and sometimes I have to render some material, and adapt some things, render it again, and so on, which takes a very long time. As far as I know, the workflow can be shortened by more CPU.
So I wondered if there's anyone who knows if I can connect the iMac to the G4's, or just one of them, to have one core extra?
Or maybe just do the rendering seperately on 2 or 3 G4's, as intel en G4 may clash on the different kind of CPU?
Just used a Kensington USB flash drive on a friend's Mac Book. Now I can't get it to mount on any Mac. I ejected it correctly before dismounting it. Any way to force a Mac to recognize the drive?
View 1 Replies View RelatedJust bought the WD Elements external Hard drive, plugged it in... and it won't mount on my G4!
-Checked all USB ports
-Doesn't show up in Disk Utility or System Profiler
Long story short I dropped my 500GB Maxtor external HD (which is really just an internal HD in a chase). The drop was about 3 ft. It was not on so I don't think there will be much damage to the disk, but it no longer mounts. I was wondering if anyone could think of a way to get the disk to mount so I can recover files saved to it. I have Tech Tools, and Data Rescue II to recover the drive but as long it is not being recognized by the computer those applications are useless.
View 2 Replies View RelatedI am new to this forum and hoping for some advice with this hard drive issue.
I opened a brand new Lacie 500 GB Hard Drive. It is connected to my macbook via usb. I selected it as my hard drive destination in Time Machine and ran the backup option.
The hard drive did mount. About 5 minutes in the backup option failed - a time machine error: time machine backup failed.
I ejected the drive and unplugged it/turned it off and rebooted my laptop. Now the hard drive does not mount on my desktop however will show in disk utility. It lists with the Lacie name and another subdivision under the name.
When I try disk repair, erase or partition..I always get the same message: resource busy. After the error, the hard drive subdivision disappears leaving only one name on the list in disk utility. (It does not have the name underneath it).
I apologize for my semi technical description. I am new to mac and appreciate any advice on how to fix this issue. All I want to do is backup my laptop using the new hard drive with time machine.
I've got an external 500gb Seagate drive with 2 journalised partitions.....one for my time machine backups and the other for holding audio samples for my drum machines and such. All of a sudden today the audio partition won't mount but the time machine partition still works fine. I go into disk utility and it shows ther but just says unable to mount when I try to mount it. It suggests first aid so I verify and repair numerous times and it says everything is ok. I can boot up Ubuntu in VMware andboth partitions are visible and all the files are there....everything is just as it should be. I was using 10.5.7 and just upgraded to 10.5.8 tonight and nothing changed.
View 4 Replies View Related