Hardware :: Change The Device Name Of External Hard Drive?
Nov 27, 2009I know how to change the name of a partition. But I want to change the name of the actual device I want to change that. Any ideas?
View 3 RepliesI know how to change the name of a partition. But I want to change the name of the actual device I want to change that. Any ideas?
View 3 RepliesAnother one of those "external hard drive not recognized" problems: I am using a Mac Mini. The external LaCie drive is in one of those beautiful boxes designed by a guy named Porsche. It's connected via Fire Wire. I have my iPhoto library stored on it. It was working just fine for the past two days after I first connected it.
Now it does not show on the Desktop. It is identified only as "Unknown device" in "About This Mac." iPhoto doesn't recognize it. I've looked at the other threads on this subject here and have reset the PRAM. Disk Utility recognized it for a while and said the disk was OK. Now Disk Utility does not recognize it at all.
I turned off the drive and turned it back on. That resulted in an alarming series of beeps, almost like somebody was sending the Morse code symbol for "E" over and over again. I turned the drive off and then on again. Now the light goes on and the drive whirs nicely. I am using System 10.6.2. Or rather, at this point it is using me.
On my Rev. C. Before I installed it, my fan kicked in only when I had a external device attached, hard disk drive, optical drive, etc. Now it runs more often. Not a big deal, but thought worth mentioning.
View 5 Replies View RelatedI have a MBP running OS X 10.6. When I connect an external LaCie hard drive to my mac, I cannot copy files to it.
I went to "Get Info", and opened the "Sharing & Permissions". It says "You can only read" and I cannot change this. There is no lock key or anything for me to click.
I'm using a 500GB WD external hard drive to store a lot of data. It's been working fine, plugged into a USB hub. Suddenly, today, the drive stopped appearing when I plugged it in. I've tried plugging it in directly to the computer, it doesn't help. In system profiler, the USB port shows up as : Vendor Specific Device. The ID is confirmed as being from Initio, so I was rather dismayed. Upon trying the drive with another computer, same thing. The drive just shows up as an Initio device, not my external drive. I've rebooted and changed cables many times.
MBP 2010, Core2Duo.
OSX 10.6.8
Info:
MacBook Pro, Mac OS X (10.6.8)
I am looking to change the location of my 'movies' folder to an external hard drive.
This is in an effort to use Connect 360 to play movies wirelessly that I have on this hard drive.
Any thoughts?
I'm editing on Final Cut Pro but it's automatically saving all the files I am capturing to the hard disk using up all my storage space. I have a 2tb external hard drive how do I change the path so it will automatically save all the imported clips to the external hard drive?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
I know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
I was just playing around with my external hard-drive - the "Ownership & Permissions" section of it's Info - and accidently changed it from "You may Read & Write" to "You have No Access" and while trying to change it back it somehow wouldn't work and then as I tried to open folders inside it, everything was missing inside the folders (presumedly not deleted since there was still 100GB of space used). So I restarted my computer as well as the hard-drive and now it won't even show up on the desktop. The odd thing is I still have it as an icon on my dock and when I click on it to open it, it just says "The application "(null)" cannot be launched. -5000". If you need to know, I have an iMac Version 10.4.11. Does anyone know what is wrong and what I should do to get it all back to normal?
View 7 Replies View Relatedif i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies View Relatedwith cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies View RelatedRecently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies View RelatedAnyone have suggestions? I have a single 1.8ghz g5, 1gb ram, 10.4.10. I have a maxtor OneTouch III USB 2.0 200gb drive attached to it.
I can not seem to eject/unmount this drive. Every time i hook it up I just have to end up pulling the USB plug or turning the drive off suddenly to get it to "eject" but then i get the improper device removal error/warning message.
I have tried dragging to trash, I have tried apple E (which is what I usually do to any device) and I have tried going into disk utility and ejecting/unmounting from there as well. no dice.
I've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.Â
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.Â
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.Â
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?Â
I need to back up hard drive to an external hard drive. How can I do this automactically?Â
Powermac g5
10.4.11
tiger
Info:
Mac OS X (10.4.11)
i have a power mac g-5 quad with an external dvd drive and a external hard drive and 2gb of ram. on my ext. hard drive i downloaded mac the ripper and that is where i put all my dvds, now today on my pmac i was using mac the ripper, popcorn, itunes, safari all at once and it froze up on me?why? could the ram be an issue? how may programs can i use at once with my pmac?
View 3 Replies View RelatedLooking for opinions or comparisons on performance between an internal mac hard drive vs an external firewire 800 hard drive or better. Is the performance on an internal MP drive or iMac internal drive much faster than connecting to a firewire 800 drive? I'm sure it depends on the drive, I'm wondering about apple factory installed internal drive vs say a WD external firewire 800
View 12 Replies View RelatedIn other words... I have moved my music library to the external hard drive, as per an earlier thread I read here on the forums. It worked like quite well. Now that it is working perfectly, I am having a hard time leaving well enough alone. It is never a good idea for me to think too much...Can itunes be installed and run on/from an external hard drive? If so, how?
View 15 Replies View Relatedi just upgraded by hard drive and cloned it with super duper.
my hard drive name when in os x, appears as default Macinstosh HD, however when i startup and hold option to select Mac or windows. the name is what i named the cloned image (which is 'mac clone'), was wondering if there's a way to change this? not really a big deal if not, just being OCD.
I was wondering if after replacing my current hard drive with a new 7200rpm hard drive and a clean install of snow leopard in my macbook--would I be able access the old hard drive as a back up to retrieve my data-- putting it in one of those usb cases--and plugging it in as a secondary drive. I used to be able to do this in windows...
View 8 Replies View RelatedI'm having some trouble changing my hard disk's icon... I can't select it in Get Info to paste in a new icon. It happened randomly after I pasted in one icon, subsequently I couldn't select the icon again...
I have tried repairing permissions and my disk (just via Apple's Disk Utility) and that did absolutely nothing.
I haven't tried changing it over Target Disk Mode and for all I know that might work... but I would kind of like to be able to change my icon without turning off my computer.
I remember in OS 9 you had to make sure File Sharing on the disk was off before you were allowed to modify the icon. I'm aware that that's not how it works in OS X but I tried it for good measure anyway to no avail.
I'm running 10.4.6 on a MacBook Pro 2 GHz. The drive whose icon I'm trying to change is my Startup Disk. I have ~10GB/100GB free on it.
I recently installed the whole Boot Camp deal and (obviously) had to repartition my disk. Afterwards my Mac HD was unaccessible until I ran Disk Utility off my install CD to repair it. Although this icon problem cropped up about a week after the install, I suppose it's possible that it could be related. Interestingly enough, I'm having no problems changing my Windows partition's icon.
I will probably buy a Imac g5 duo core (not new), but the poblem is that the hard drive is only 160 gb ... I want to put a bigger hard drive in it because i want to install boot camp (os x + windows) on it and have space to work on both (os x and windows).
I have an external hard drive too (160 gb) Is there a way that i can use it to install boot camp on it and run it from the external hard drive ?
I've seen a number of desktops posted in the picture section that have different icons for the hard drive. I have a MacBook Pro, and would like to replace the stock HDD icon with an icon of a MacBook Pro. Where do I find such an icon, and how do I replace it?
View 23 Replies View Relatedi just bought a mackbook pro. Joined the cult :. Anyway, is it possible to change the hard drive on it? Or must i send it in to be done ?
View 2 Replies View RelatedDoes anyone have a step-by-step instructions with pics on how to change out my 2.2ghz white MB hard drive?
View 4 Replies View RelatedSeagate 500 GB 7200 RPM drive? CHECK!
Snow Leopard? how to do it
Replacing a stuck hard drive (flashing ? screen) I could not get the new one to go all the way in. To check the new one was not the problem I tried to slide in the old one which had come out so easily but with the same result-it meets a springy resistance about 1/8" short of all-the-way-in and will go no further.
I do not know how much force is too much to use. Has anyone had the same experience in handling this problem or any suggestion for my next step since all this is new to me?
Whenever I try to do this, I copy the PNG file, paste it in the get info part of the hard drive icon but i just get this on my desktop.
Can someone tell me what I'm doing wrong?
my mac has a pioneer dvd drive in it and it wont read my dvd+r dl and I am wanting to burn a mac os 10.5.dmg to it and install 10.5 but the dang thing is ejecting it. So what should I do to get it to work get the external dvd and run it from it or get a external hard drive and try it that way.
View 6 Replies View RelatedI just recieved the G4 Cube from Flyinace2000, MR member of vast integrity and great packing skills.
I want to try to put a new hard drive in it before I boot it up to see if that will help things.
Where would I find a photo guide for Cubes and switching the HD?