Hardware :: Average Transfer Speeds To Airport Extreme USB HD
Jun 6, 2009
I recently acquired an Airport Extreme Base Station. Its the previous generation - i.e. the one that does not have the dual band technology. I am getting extremely poor upload speeds to this drive while trying to backup (using time machine) or transferring even small files. Generally the transfer speeds are less than 1 mb/sec. Is this normal? I was under the impression that under wireless N, these transfer speeds would be much faster. I am literally within 5 feet of the router.
View 2 Replies
ADVERTISEMENT
Jul 22, 2010
I've recently upgraded into a faster Internet Provider, but for some, I'm still getting poor internet speeds using my Airport Extreme Base Station (Model # A1034) when using my Wifi.
When connected via Wifi, I'm getting at least 1-3/Mbps downstream while I can achieve 10-15/Mbps when wired.
What's causing this drastic downstream speed difference between Wifi and wired? Do you think it's time for a new wireless router?
View 4 Replies
View Related
May 2, 2010
i've got a 6 year old 12 inch powerbook G4 1.33 ghz that has internet speeds around 5177kbps, but overall its a bit dated sooo I wanted something a bit more new. I recently picked up a white 2.4 ghz Intel Core 2 Duo Macbook, HOWEVER the internet wireless speeds on it is dismal in comparison. I'm getting download speeds on average around 405kbps and upload speeds are pretty much non-existant! I've matched both of them to the same internet settings and they are both running 10.5.8. So again I'm stumped and if anybody can give me some idea as to what to do, Id greatly appreciate it!
View 4 Replies
View Related
May 25, 2009
I am doing an initial back up for Time Machine. I've got 56Gigs worth of data to back up from my 2Ghz Uni Body MacBook (with 4gig of Ram & running OS 10.5.7). I have a newly purchased Airport Extreme base station to which is connected to a Western Digital 1 Gig External HD. I am getting a transfer rate of about 1 gig per hour. Is it really this slow? I am using a 5Ghz network to reduce interference and they are very close to each other.
I tried connecting the WD drive to the MB. After I switched off Virus Barrier V5 and stopped Spotlight indexing it was quite fast. However there didn't seem a way of tricking this backup to think it was done via Airport Extreme. How could this be done?
It looks like my MB is going to have to be left on and stay at home for the next couple of days!
View 9 Replies
View Related
Apr 22, 2009
I have 1TB Seagate Freeagent external (15mb buffer / 7200rpm) connected to MBP. Transfering .avi files using firewire 800 takes about 20 seconds per gb so around 50mb a second - Is that not incredibly slow considering firewire 800 is rated upto 800 mb/s?
View 6 Replies
View Related
Jun 12, 2010
My girlfriend just got a new MacBook Pro and I've been helping her transfer software and such to her computer from my MacBook Pro. When I was transferring games to a USB 2.0 flash drive (it was only 25% full and it is 2GB), it was freezing up when transferring multiple things. So, I stopped everything, and transferred everything one at a time. Well, it took between 5-10 minutes to transfer a 50MB game! When I plugged the drive into her computer it took all but 30 seconds to transfer. Is this difference accounted for by the .14 GHz processor bump from my 2.26 to her 2.4? Or should I be concerned about this slow speed? My computer is little over a year old now and I've already had the logic board replaced.
View 2 Replies
View Related
Nov 20, 2010
I have a new MBA (4GB), which I am very pleased with but I can't figure out why its wifi transfer speeds seem much slower than my Mac Pro. The MBA gets a max of about 250 kb/s while the Mac Pro gets over 1000. I'm wondering whether there's some adjustment that would speed up the MBA.
View 20 Replies
View Related
Mar 24, 2009
I've been getting terribly slow transfer speeds when trying to send files to friends over iChat. It can even take over 15mins to just send a 1mb file.
View 4 Replies
View Related
Apr 18, 2009
How long does it take for you to copy about 12GB wirelessly over a N network to a NAS attached to your router? For me (Granted its over G because I don't have a N card), it takes close to 5 hours for 12GB :O. Is it supposed to take that long or what?
View 4 Replies
View Related
Jan 22, 2010
I have some questions to ask about my MacBook Pro (15" 2.66ghz mid09). It's running under 10.6.2 fully updated.
1) My optical drive sometimes keeps making this noise every 10sec even without a disc in it, is it normal?
2) My hard drive sometimes makes this noise even when there is no disk activity (I checked with Activity Monitor.app), again is this normal? I remember hearing the same noise on my old PC when there was some heavy disk activity; but on my Mac it does it for no reason.
3) Can you recommend me a fan control software for Windows 7? Having to boot on OS X, set the fans at 5000rpm and reboot every time I want to do some gaming is pretty tiring
4) I was making a little video with iMovie today, I only added a photo and a mp3 file but suddenly my computer started getting slow, that's when I noticed it was actually taking 2.20Gb of memory.
5) Can you recommend me something that would give me the same mouse acceleration curve as in Windows? I tried SteerMouse, USB Overdrive, MouseFix and ControllerMate but none of them gave me a satisfying result. It makes me feel that my new Kone mouse is totally useless.
6) I have low transfer speeds to/from USB drives, around 5Mbytes/sec while my friend with his 2006 HP laptop could achieve around 20Mbytes/sec with the same USB drive. No, it's not funny.
View 4 Replies
View Related
Jun 19, 2010
Got a question for all you people experienced with wireless LAN transfers over a 5GHz 802.11n network. I just got myself a new AirPort Extreme and a 2TB hard drive. I'm planning on using this 2TB hard drive as a media server, but only for one stationary MacBook that I have hooked up in the living room. Here's my problem: If I plug the hard drive directly into the AirPort Extreme and transfer something from my iMac in my bedroom, the speeds are fantastic. I definitely see the 5GHz speed bump, and can transfer a 4GB file in just a few minutes. However, since the MacBook isn't that powerful, streaming a movie over WiFi seems to skip the playback a bit.
I would love to have the server plugged into the MacBook to avoid this skipping. I've tried playing a movie off a USB drive and it plays perfectly fine. However, when I transfer a movie from my iMac to the hard drive hooked up to the MacBook, the transfer speed is much, much slower (what would normally take a few minutes takes about 15). Why is it doing this? Is this normal, or should the transfer speed be theoretically the same as if the drive were plugged into the AirPort? I double checked that this MacBook is in fact connected to the 5GHz network (although it's at 270mbps instead of 300, but I don't think that should make that big of a difference).
View 7 Replies
View Related
Apr 9, 2012
Our still photographic studio has a range of MACs all connected via a gigabit D-Link switch to a series of Buffalo NAS raids. Wiring is CAT5e, all devices have gigabit ethernet cards and the link lights on the switch suggest that all devices are connected at that speed. We currently get file transfer rates of between 5 and 12 MB/s depending on network traffic. We would like to upgrade our NAS to a NAS/SAN, preferably using the existing wiring (and avoid the expense of Fibrenet). 50 or 60MB/s would be great if possible. Any suitable architecture and Hardware. Cable lengths are a maximum of 30 metres.
Info:
Mac Pro, Mac OS X (10.6)
View 14 Replies
View Related
Dec 1, 2010
So I've been using a 1TB Time Capsule for a while now with my old HP and recently purchased a MacPro [15 inch base model]. My room mate has a recent model Macbook as well as an older iMac. We have a 50MBPS internet connection through our local ISP. More or less I am looking for advice on how to make sure our network is:
1. Secure.
2. Faster transfer speeds between all of our computers to and from the Time Capsule. [Where to find / adjust / optimize these settings]
3. Utilize our internet connection to it's fullest potential.
I am mostly concerned with my machine [optimizing it that is.] then the rest of the computers in the house. Go slow and use medium sized words as I am still wading into the world of Mac.
View 4 Replies
View Related
Mar 25, 2012
I'm running Lion Server on a Mac Mini and using SMB to share files between the server and both Windows and Mac machines. I can't figure out why I can only get 2 Mb/s transfer speeds between the server and the other machines. I'm quite certain I'm not limited by my network and the disk write speeds clearly exceed 2 Mb/s. Possible to boost this speed or is this an actual limit of SMB or Lion Server?
Info:
Mac mini, Mac OS X (10.7.3), Lion Server 10.7.3
View 1 Replies
View Related
Nov 30, 2008
My external drives transfer very slowly on my MacPro. I've been searching for answers and have turned up very little.
Just to make a note, I measured my disk speeds with both AJA System Test and copying files between drives and reading the Disk Activity in Activity Monitor.
I have 3 external drives, all MyBook Premium or Professional, 1x 500GB, 1x 1TB and 2x 1TB in RAID 0. I had them on Firewire 400 and the RAID 0 2TB one on Firewire 800. My transfers on FW were all around 24MB/sec on all drives (much less than what I should be getting with FW400). I then read somewhere that the FW bus on the MacPro uses the slowest speed connected for all FW connections. So I unplugged everything but the FW800 Raid 0 drive and my transfer rate jumped to 40-60MB/sec. This is much better, but still about half or so of what I expect it should be producing from an external RAID 0 setup.
To keep my FW800 backup drive faster, I've plugged the other two into USB2.0. The transfer speeds on both drives are now hideous, around 10-15MB/sec. This is so slow, but I'm not sure what to try to fix my speeds.
The HD's in the external drives are all 7200rpm, and all should be transferring at a higher rate. Do you have any suggestions or ideas? Ideally I'd like to get everything transferring at rates they should be transferring at, but I'll settle with my current FW800 speed of 40-60MB/sec if I can get my other two drives transferring at a non-snail pace.
Is this a common issue? I can't believe I'm the only one plugging multiple external hard drives into their Mac Pro. I hope someone has a fix or solution for this. I'm all ears!
System: Mac Pro (early 2008) Mac OS X (10.5.5) 3.2Ghz 8-core - 16GB Ram - 4x1TB SATA - GeForce 8800GT - Dell 30" 3008WFP A02 - Gateway 21" FPD2185W - 3xMyBook external drives
View 8 Replies
View Related
Mar 3, 2009
Simple question: Of the new features in the new AirPort Extreme Base Station, which of these could become available to the old AirPort Extreme Base Station via a software/firmware update? I have to think that at least some of the new features don't actually require new hardware. Just trying to figure out if I want to shell out $179 for a new AEBS when my current AEBS works pretty well as it is.
View 21 Replies
View Related
Feb 23, 2010
I just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
View 2 Replies
View Related
Apr 25, 2010
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
View 1 Replies
View Related
Feb 12, 2012
I have previously time machine backups for two macbook pros on same drive. However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
Info:MAC Book Pro, Mac OS X (10.6.4)
View 1 Replies
View Related
Jan 10, 2009
my internet connection got extremely slow. I thought it was because our ADSL modem was acting up, so I restarted it several times. That didn't help at all. I didn't really need a fast connection until today, so I started digging to see if I could find where the problem was. Well, it turns out it's with the AirPort Express base station. Base stations, actually, as I have three. I couldn't get a good reception in the back of our house, so I bought a second that's used in the living room, which I now have connected to my stereo. AirTunes is very nice, as I found out. I also wanted to connect a printer wirelessly, so I bought a third AirPort Express to go in the back of the house (as that's where I put the printer).
View 12 Replies
View Related
Jan 29, 2009
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies
View Related
Mar 14, 2009
This might seem an odd question but I had to replace my last Airport Extreme base station as it was faulty....I've now got the newer "Dual Band Extreme Base Station". I want to avoid any conflicts with my old settings for my wireless network with my MBP. Should I uninstall the last version of Airport Utility?Is there anything else anyone would recommend before i install or connect the new hardware/software?
View 2 Replies
View Related
Oct 11, 2009
Can it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
View 4 Replies
View Related
Jun 15, 2012
The latest upgrade of AIrport Utility doesn't support my Airport extreme, but the old version 5.6.1 says it doesn't work in Lion. How was I managing my Airport before th 6 update? What do I do now? Will I have to get a new Airport?
I have DSL service. I have an iPod Touch and an iPad 1 that I'm trying to connect. I just upgraded both iDevices to iOS5. I've been having trouble keeping an internet connection live for them, but now I can't even get the wi-fi to connect.
Info:
AirPort Extreme, Mac OS X (10.7.4)
View 4 Replies
View Related
Sep 11, 2014
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router. Â
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.Â
Info:
Airport Extreme
View 1 Replies
View Related
Mar 10, 2009
I'm using a new AirPort Express updated with the latest firmware and AirPort Utility and both my roommate and I have been banging our heads against the wall. Speed to the APE is 130 Mbit/sec and both of our computers are connected to the APE just fine. This is what the ping looks like Ping has started ..
15 packets transmitted, 15 packets received, 0% packet loss round-trip min/avg/max/stddev = 151.575/154.369/156.210/1.359 ms. When I did a speakeasy test, it turned out that I am getting exactly half of our allotted bandwidth. Is there a way to configure this APE to act more like a router that truly shares a connection rather than a splitter that's cutting it in half?
View 3 Replies
View Related
Sep 5, 2010
I just purchased an Airport Extreme 802.11a/b/g/n to use as my home wifi router. I have two Airport Expresses 802.11b/g. I want to use one for Airtunes to my stereo and another for wireless printing.
View 1 Replies
View Related
Mar 9, 2010
I currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
View 1 Replies
View Related
Jul 9, 2010
I have a Macbook (white unibody) running Snow Leopard. I have a personal wireless network using an Airport Extreme and I have an external hard drive (WD) connected to the Airport Extreme. I use this hard drive for my Time Machine Back ups.
I just got back from a trip and tried to back up my time machine. I got the error that the back up disk is not available. I then tried to open the airport utilities.
It tells me that "Airport Utilities is unable to find any Airport Wireless devices". I find this doubly strange because I have no problem connecting to the internet on this wireless network which supposedly does not exist.
View 1 Replies
View Related
Apr 21, 2009
I bought the new airport extreme to extend the wifi range in my household and hoped to share a hdd. Upon my experience and reading the forums, the sharing hdd is not as easy as I thought. But that is not my issue at the moment.
My issue is with extending the network. A couple weeks of ago, I did the setup to connect the two airport extremes together (older round AE & new box AE) using aiport utility. It seemed to have work because the signal was stronger in a part of the house that usually had 0 to 1 bar.
But shortly after, the signal showed itself as inconsistent. The signal strenght is jumpy from 0 to full bars. And right now, I am sitting in a part of the house that used to have 0 bars and now, I get full bars. And yet my mbp cannot see the newer, closer in distance AE.
View 5 Replies
View Related
