dog chewed through the cable that runs from the wall to the power adapter for my 20' ACD. I've only been able to find either the adapter, or the adapter and the cord. I just need the cord. Anyone know where i can buy just the CORD, i dont need another power adaptor.
i believe the part number is - Volex APC13F
What cable and adapter I need to connect my macbook to TV? I think it's hdmi cable but don't know which adapter I need. Do I have a mini-display port? I don't know.
View 8 Replies View RelatedWhere can I obtain a new 23 Inch Cinema Display power adapter? I've searched the Apple Store but I cannot find it.
Information:
G5 Dual Core PowerPC
Mac OS X (10.5.1)
23 Inch Cinema Display
I got the mini-displayport+USB(sound) to HDMI adapter. I just need a HDMI cable to plug into the adapter now. What is a cheap good HDMI cable? What kind should I get? 1.3 or 1.4? Does it matter?
View 13 Replies View RelatedI'm trying to plug my new mac mini into my Dell flat screen monitor. It doesn't seem to fit my HDMI to VGA cable so I'm assuming that my cable is in fact a DVI? The cable is actually a little too big for the VGA adapter and no spots for the screws.
View 8 Replies View RelatedAnyone know where I can buy an extra AC cable for the MagSafe 85W power supply that came with my late 08 MBP? I'd like an extra cable and I'm not interested in ponying up the dough for the entire power supply. I checked the Apple Store and Macmall, but haven't found anything as of yet.
View 3 Replies View RelatedCan I use existing 85w magsafe adapter from existing macbook pro with new MBA 13 magsafe2 port ?
Info:
MacBook Air
I use my macbook with an external monitor at home. When I visit my clients, I unplug the cable and travel with just the macbook. When I use the macbook at home, I have it sitting on a cheapo stand that tilts the laptop to improve ventilation at the bottom. I notice that the video adapter cable dangles on the side and this might be introducing some strain on the video connector.
Is there a connector or jig that will reduce this strain? e.g. the cinematic screen uses a connector that combines video and power connection and this seems to be nice and solid. Any such third-party product exist? alternatively, has there been any 'lifehacker' type of solution for this?
I was wondering if there is an adapter or cable of some sort where you can plug in the minidisplay port from the ACD to dvi from the video card of a pc?
View 15 Replies View RelatedI'm looking for a 1 TB external hard drive to connect to a firewire 400 port to use to backup my iMac. So far, the better drives, 7200 rpm, seem only to have usb 3 connectivity or are expensive. Is there an adapter or cable to connect a usb 3 input device to a firewire 400 port?
View 3 Replies View Relatedi just bought the macbook alu. w/ the mini displayport, i tried to plug it directly to my samsung 1080p hdtv with the Mdport to vga cable but the tv didnt display anything. so i searched the web to find other solutions (Mdport to dvi -> dvi to hdmi cable), but for me that means buying 2 other cables so i was wondering if i could use this route: mini displayport to vga -> vga/dvi-i adapter -> dvi-i/hdmi cable -> 1080p hdtv? with this example, i would have to buy only the dvi-i/hdmi cable since I already have the vga/dvi-i adapter (my old MSI 6600gt one) so hows that sound? thx for giving me the answer ASAP cause I need to make a surprise presentation for my boy!
View 8 Replies View RelatedWhen it did show the screen saver the mouse arrow was on the tv and not on the computer and there were no icons to be found on the tv to click on. Right clicking would only bring up the screen for setting the background pictures.
Info:
MacBook Pro, 13" bought in 2012
I recently discovered my computer had died while it was sleeping. I tried charging it but am recieving the "Battery not charging, power source: power adapter" status.My power cord light is green, always. and the computer dies instantly when I remove the magsafe.
I've tried the "remove the battery, press the power button, plug in the magsafe" troubleshooting process, but it doesn't work.I've noticed that even with the battery out, the charger reads a green light.I've tried several outlets with the same results.Here are my battery stats
Battery Information:
Model Information:
Serial Number: DP-ASMB016-384e-7636
Manufacturer: DP
[code]....
Info:
MacBook, Mac OS X (10.5.8)
anyone happen to buy that vid card power cable from welovemacs.com??
[URL]
i'm planning to buy a pair.. but i'm not sure if it will fit....
one end plugs into the motherboard.. the other end goes into the vid card but the question is does it fit the Mac Pro pci express power socket?
and the other end of it does it fit any standard pc vid card? or is it also smaller?
as i plan to buy this for my Mac Pro so i can power up the 8800 gtx
When both computers Beige G4 (os 9,2,2) and an eMac (os x Tiger) are connected to the internet with wire cables, there's no problem. I can hook up to the eMac from my Beige G4 (os 9.2.2)using Chooser/Appletalk/and inputing the IP address of the eMac (from Network preferences); which lets me connect.
When I'm hooked up to Internet- wireless with Afterthemac n300 usb internet adapter on eMac, my problem is that I need to have an IP Address of the wireless computer (eMac 750mhz) so that I can connect to it with a G4 Beige Mac os 9.2.2) which I can't find. I get the following in the Network preferences: Configure IPv4: Using DHCP (drop menu); IP Address 192.168.2.11; Subnet Mask 225.225.225.0; Router 192.168.2.1 The optional boxes for DNS Servers and Search Domains are empty.
These numbers were suggested by the Internet provider, which I entered in anticipation and before I received the n300. The router which I rent from the service provider is a SIEMENS GIGASET567. So- is there a way that I can change the numbers from above so that I can connect both computers. I tried the IP 192.168.2.11 but eventually a message comes back telling me it can't find the server. Another reason might be if I would want to hook up to the eMac from another office to get information on that particular computer.
Don't want to ask the Apple Store since they'll just tell me I can't, but can I use the 85W power adapter that came with the 15"MBP on the new Air with no damage? Ok, to use in a pinch?
Hmmm, how about the other way around (using a 45W power adapter on the 15"), I am thinking "no damage" just that it would take longer to re-charge?
I have both a MacBook (personal) and MacBook Pro (work; provided by NASA). The MacBook has a 60W Magsafe Power Adapter; the MacBook Pro has a 75W power adapter. I am going on international travel for several weeks, do I need to bring both adapters with me? Would there be any problems caused by using a higher-power (75W) power adapter to charge a MacBook or vice versa?
View 7 Replies View RelatedI had an extra 45w power adapter in my office; which I used to use with my Macbook Air. So today, I mated it to my new i7 MBP15 and was expecting it not to work because of insufficient power. But it seems to work just fine.
Is there any harm in using the 45w power adapter at work and the 85w adapter on the roadhome? I'm assuming the 45w adapter just wont charge the battery as fast.
I need a new power adapter for our computers. We have an Air and a MacBookPro 15". Can I use one power adaptor for both computers without harming the smaller computer?
View 2 Replies View RelatedCan I ask a big favour of anybody who owns one of the new 9400M Mac minis?
Can you tell me the length of the power cable?
does the older non-iSight iMac G5 have a built in PSU? (no external brick?)
what does the connector on the back of the iMac look like? (or the plug)
thinking about an older iMac G5 (vesa mountable) for a project Im working on
Can someone point me where I can get that 6-pin power cable that connects the videocard to the MP motherboard, I remember someone mentioned where one could purchase this cable but I forgot which thread it was.
View 11 Replies View RelatedI got up and tripped over the power cable and It popped out (thanks magsafe! ) but the computer immediately shut down. I plugged it back in and started it up to see my clock was messed up. I changed the clock and redid the update. Everything seems to be working now but I was just wondering if anything else could have happened?
View 2 Replies View Relatedsend me pics of the power cable of the new mac mini because i want to use it in Europe.
View 19 Replies View RelatedSo just today I was using my MacBook, then I put it down, and noticed smoke coming from the ground. The end part of my power cable was slightly on fire. I quickly took it out my laptop and from the wall. So now the cable's burnt itself, is it covered by AppleCare? I am still in warranty from when I bought the laptop.
View 4 Replies View RelatedI am searching for any bright ideas to power up my Macbook. I find myself in Belize without my cable cord for my Macbook but I happen to have a powered up PC. Any ideas on how I might use maybe my PC to power up my Macbook?
View 5 Replies View RelatedI recently purchased my first MBP, question is.... Do these power cables break down and crack as easy as the iphone data cables?? Please tell me no, at $79 a piece, that would be terrible.
View 5 Replies View RelatedI bought a Referb 09 Mac Pro. I purchased a Gigabyte HD Radeon 6850. The Power cable that came with that card is obviously for a PC.I just need to know what cable I need and where I can get it?
Info:
Mac Pro, Mac OS X (10.7.3)
I can not book myMac book air without power cable . Power shows 96 % power .
Info:MacBook Air, Mac OS X (10.7.4), Bought 3 weeks ago
It got REALLY hot. I had to snap my hand back after touching it, and my hand was red. I noticed it had turned off, so I went to see what was the matter. It felt hot enough to possibly catch fire.
View 4 Replies View Related
