As I understand it the MDP from the 5770/5870's have audio support. So does the cable from the new 27" LED display. Do MDP extension cables that can also carry the audio exist (e.g., is Atlona AT13032-2 such a cable)?
View 1 RepliesIs this mini displayport male to female cable and this USB 2.0 A Male to A Female extension cable sufficient to extend the connection on the 27" cinema display?
View 9 Replies View RelatedI'm going to get a Mac Pro in the new year and a Cinema Display to go with it. Do the 27" Cinema Display's use audio output from the USB port of the Mac Pro or do they use the new 1.1a Mini Displayport standard to pass from the Pro to the Cinema Display?I will need extension cables to get from the Mac Pro under my desk to the Cinema Display. If they use USB for the audio thats no problem, but all the Mini Displayport extension cables I can find online are only 1.1 compliant and state that they can't pass through audio.
View 2 Replies View RelatedI bought a second screen a few days ago, the 23" LG M2394D. I have got it connected to my 24" Aluminium iMac. The resolution of the monitor is 1920x1080 and the iMac is 1920x1200. System preferences lets me assign the different resolutions on the different screens, but the quality on the second screen at 1920x1200 is very dodgy. If i put it to 1650x1050 it looks better, but not as good as the apple display. I have also noticed that the picture is 'too big for the screen', i.e. there is some of the picture outside of the screen area that i cant see. I have the screen connected via the Apple MiniDVI to dvi connector and then a DVi to HDMI cable into the screen. Is it the HDMI that is causing some of the problems? would a straight DVI cable work better? Here is the screen: [URL]
View 3 Replies View RelatedI'm not sure if the single "combo" cable coming out of the back of my 30" cinema display can be removed or not. I'm only willing to pull so hard on it to find out I'm boxing it up for travel to another state for a trip and it would be easier to manhandle it into & out of the box without the cable attached.
View 2 Replies View RelatedCan anyone suggest what should I do with Mac Mini 1,83 GHz Intel Core 2 Duo and my two new Dell monitors?I tried them using their standard VGI cables connected to a VGI port on a Mac Mini - both are dead. Not a single flicker.
My Mac bought from a trusted friend and acts as a practically new machine - but not with my monitors.
P.S. I went through several Mac-related forums and there's abundance of issues with "alien" monitors.
I get this every time I boot.
View 12 Replies View RelatedFirst Safari extensions weren't showing up.I was able to get the extensions tab back, but found the privacy tab won't display. I unknowingly jacked another thread, as I'm new at this, so now am posting my own. I'm running Safari 5.1.5 on OSX Lion, MacBook Pro 2009.
Info:MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
I just installed a number of software updates - iTunes, iPhoto, iMovie, etc. - and this message came up: System extension cannot be used The system extension "/System/Library/Extensions/Iomega/SAM.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.
Info:
iMac, Mac OS X (10.7.2)
I responded to the upgrade of iTunes today - to version 11.4. I did this in short succession on a Macbook Pro and iMac, both running Mavericks. On both machines I got an error message immediately after the upgrade as per the attached image...
Info:
MacBook Pro, OS X Mavericks (10.9.4), iTunes upgrade - 11.4
I have a problem with Norton AntiVirus and have spent hours on-line with three levels of Norton Engineeers. Norton will not perform an idle-scan and loses its license on restart, requiring re-entry of the product key.
When removing Norton files for a re-install an alert pops up System extension cannot be used The system extension "/System/Library/Extensions/SymInternetSecurity.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update. As noted, I have spent many hours on the phone and LiveChat with Norton engineers. The last one has suggested I contact Apple Support for assistance. They will call back on Monday. I am running a 15" MacBook Pro (Early-2011), 2.3 GHz Intel i7, 8 GB 1333 MHz DDR3, OS X Lion 10.7.3, 512 GB Solid State SATA (Crucial)
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3), 2.3 GHz Intel i7, 8GB 1333 MHz DDR3
Installing latest version of iTunes (11.4) today led to the following error message: System extension cannot be usedThe system extension “//System/ Library/ Extensions/AppleUSBEthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.
I'm able to use my USB drive for Time Machine, and that appears to be functioning ok. And what does it mean for the continued safe operation of my MacBook?(Other than the distraction of getting a worrying error message that I take time out to report?)
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I checked out monoprice, but I couldn't find it. I wanted to wall mount the display to clear up some more desk space, in addition to make it easier to adjust the monitor. But I need a longer cable to be able to run it through the wall and still connect it to my MBP.If anyone can point me in the right direction
View 5 Replies View RelatedThe cable that accompanies Apple's 24" LED display is surprisingly short.This limits considerably the number of ergonomic/office layout possibilities.Is anyone aware of a technically acceptable extension cable (even to add 1-3 feet)?
View 8 Replies View RelatedThat's the message I got when adding a new printer driver. The reference was system/library/extension/cnqe202-classicnotseize.kext. Or close to that. I think I got that message also when upgrading to 10.6.1. As I recall there was also a note about updating this extension but no info on how to do it. Searching for .kext brought up a long list from last August having to do with crash reports with skype, real player, fire fox and a couple more; but nothing permanent and everything is working fine. Anyone have any thoughts about this? I'm using an iMac, 20".
View 4 Replies View RelatedKeep getting "System extension was not installed properly" message at start up after attempting to instal upgrade osx (snow leopard 10.6) right now I have osx 10.5. How do I repair it. Can I use SL 10.6 on a 2006 IMac?
View 3 Replies View Relatedevery time i have an update this will promt out, but the update still cary one sucesslly. do i need to do some thing with it our still ignore it? or do what it says? How to? The system extension “/System/Library/Extensions/WkClassicNotSeizeDriver.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
View 1 Replies View RelatedI found this. Is it the thing I want to make the ridiculously short cable a little longer? Also, is it a good price
View 11 Replies View RelatedI have updated HP drivers twice through Apple's Software Update and each time I get the following error: After dismissing the message I get a confirmation that the update was successful.
MacBook Pro
Snowleopard 10.6.2
2.16 Ghz Intel Core 2 Duo
I have a Macbook with Snow Leopard and I plugged an auxiliary display on mini-dvi port. The display of the Macbook is my primary display and the other is the secondary. Is there any way to set the auxiliary display to be primary and the Macbook display to secondary?
View 3 Replies View RelatedThe system extension /System/Library/Extensions/SyncRAIDExpander.kext was installed improperly and cannot be used. try reinstalling it, or contact the products vendor for an update. what does this mean?
View 1 Replies View RelatedI was having some weird problems with file sharing on my network recently, so I tried changing around some of the permissions on my drives to see if I could resolve it. For some reason I was getting messages saying I didn't have permission to copy files from one computer to another on my network. This seemed to come on randomly as we have been doing file transfers this way for quite some time now. I looked at our file sharing preferences in the System Preference's and added all 4 drives from my Mac Pro in there and made sure that my username had full read and write capabilities. I then tried logging into my Mac Pro from my iMac, just like I've done in the past, and I was still unable to copy the files. So I removed all the folders and turned off file sharing. I then clicked 'Get Info' for my main Macintosh HD and tried changing the permission settings there. I clicked the option to make my username the owner, and then I clicked 'Apply to enclosed items...' and this brought up a progress bar that I let go for about 10 minutes. Then I got a pop-up error message stating "System extension cannot be used" and had an extension path listed underneath, saying it was installed improperly and cannot be used. This happens an endless amount of times. It seems to be giving me this message for every single extension on the computer. If I hold down enter the pop-ups just keep coming with different extensions listed.
View 4 Replies View RelatedThis is the inside of my Mac Pro.
I've recently acquired an airport card, but i can't find the cables needed...
Recently I tried installing a 2.5" SSD in a 3.5" enclosure (Icy Dock) in one of the internal drive bays in my Mac Pro. The enclosure was defective, apparently, because the SATA ports on the enclosure didn't quite line up with the internal SATA ports in the MP drive bay. Unfortunately, I pushed a little too hard to get it in and I ended up bending the metal brackets that the black plastic SATA port is screwed on to in the Mac Pro.
The result is that the SATA port is now bend down at about a 10% angle, which is enough to prevent me from sliding a hard drive in and connecting it. I've tried to bend it back to the normal angle, but I wasn't successful.
It is a recently purchased LG TV, and the latest Macbook Pro bought in July.
It would help if you could post some links from the Apple website or whatever.
Okay i have a ten year old Sony Trinitron TV. I am trying to connect my Macbook witch has a mini Dvi port to my TV that only has the S-video and RCA inputs. I have the DVi to VGA adapter and a VGA to S-video/RCA adapter. when i plug everything in i get nothing on the tv and my computer does not seem to detect the Tv What do i do? i have been looking and cant seem to find a answer.
View 8 Replies View RelatedI've made the decision to buy a mac mini and I'm preparing to order online. I have one question: can you explain the video outputs? I want to be able to hook up my flat screen monitor that can be connected via VGA or DVI and my flat screen TV which has VGA or HDMI inputs available. So, what kind of video outputs does the mini have and what ables/adapters to I need to hook up my monitor and TV?
View 3 Replies View RelatedI am a new mac user and have a MacBook running the new Snow Leopard platform. I would like to be able to use it as a desktop when at home. I understand I will need cables. I have a good old VDU which I want to keep if I can. It works well, it is currently connected to a PC.
1. Can I use the VDU I have, if not, what generic type should I buy?
2. What cables will I need; what should I ask for?
3. I have a Microsoft natural shaped keyboard which saved my wrists, I wish to carry on using it, The keyboard is a USB one, though I don't know off-hand if it is USB one or two.
I am running MS Office for Mac so I presume I should be able to transfer my MS folders over to this MacBook.
My ethernet port is not responsive. Same cables work elsewhere. Doesn't light up, not recognized at all. I tried to zap the pram but to no avail. Suggestions?
View 1 Replies View RelatedI recently bought a Cables to Go DB9 Adapter to connect my ancient Sony Handicam to my Macbook. The problem is that the disk that came with the cable only had the PC drivers, and no make ones. I already checked on the Cables to Go website, and they don't have any Mac drivers. Is there any way I could get one so my Macbook will register that it's connected to my camera?
View 4 Replies View Related