ive been using FCPX for ages now. now for some reason....i'm unable to add a cross dissolve to the VIDEO track where I would like a dissolve....i have attached a jpg to show you.....as you can see, the cross dissolve when i drag and drop to the VIDEO layer......forces to the AUDIO layer.
Info:
MacBook Pro
I initially made a slide show of 250 old family photos in iPhoto. It looks great and the cross dissolve function is very smooth.
However, I now need to take portions of music rather than entire songs and blend the songs into each other. This requires that do the slide show in iMovie so can use the timeline to edit the music to fit with certain portions of the slideshow.
The problem that I am running into is that the cross dissolve function in iMovie is jumpy and not smooth like it is in iPhoto. Also, some photos have "stuttering" and flashing between the transitions. I have tried adjusting the cross dissolve time and length of photo and can't seem to get it to look right. Can anyone tell me what I am doing wrong? For example, if I want each photo to be on the screen for 3 seconds, how long should I make the transition? If I remove the transitions, this problem is gone. But then the photos just go from 1 to the other after 3 seconds and the effect is a bit jarring. I'm stumped. In addition, the image quality does not seem as good as in iPhoto - but if I use iPhoto I cannot make a title page or time the music.
Just made an image slideshow in Final Cut.
Just a bunch of images and some audio.
When I export via File > Export > Quicktime Movie..., the cross dissolves between images disappear when I watch the movie in Quicktime.
When I export via File > Export > Using Quicktime Conversion... the color looks horrible in the Quicktime movie.
So I've recently purchased a late 2013 27 inch iMac i7, 32gb ram, and for some weird reason my tracks don't stay synchronized. I always synchronize my videos, 2 tracks, in the beginning but for some odd reason it ends up out of sync towards the end. I tried the detach audio enter realtime method, it worked temporarily but it went back to the weird sync issue.
Info:
iMac (27-inch, Late 2013), iOS 7.1.2
I have Final Cut Express 4 running on an iMac with Leopard 10.3.5. The problem I have is I cannot hear a music track & the sound track on the film clip at the same time when I run the clip. I only hear the clip sound track until it finishes then the music track plays. If I drag the scrubber bar along the time line I can hear both the music & the Clip sound track together. This only happens when I logon to the Mac as an Administrator. (I have never managed to hear both sound tracks together whilst logged on as Administrator.)
In desperation I created a user account on my iMac. If I logon as a user Final Cut Express 4 works ok ? I hear both sound tracks together when I play the clip. Any ideas how I can make the Administrator account work as the User account does? As the iMac is only used by myself I don?t need any user accounts.
Someone at work recorded a screen capture video. Within the frame, there's good material but a lot of garbage around the edges that I don't want (what Sally Hogshead would call "screen crapture"). The good stuff lasts the entire duration of the clip, is not perfectly centered, and does not move at all in its placement or change size throughout the clip.
If I crop or trim, I can eliminate the garbage, either making it transparent or black (there's no other clip beneath it to show through) easily enough. Is there a way to then export just the desired portion of the video frame (the non-cropped good stuff) as its own video at a smaller frame size?
Info:
Final Cut Pro 7, Mac OS X (10.7.5)
I'm wondering whether to go PC and Sony Vegas Home Studio or iMac and use iMovie but I'm not sure if iMovie can do what I want: I want to make a music video for a track I made, in Sony Vegas I can add a audio file to a track below the main video track and see it's waveform, then edit the video clips to match certain points in the track. Can iMovie do this? I've done a bit of searching on the net but can't find a answer. All I've seen the green background that gets added to clip window. Also is a Quadcore i5 OK for video work?
View 1 Replies View RelatedIf I have a video track with multiple alternate audio tracks (say different languages), can a user select the audio track of his choice and play in Quick time?
Info:
iPhone 4S, iOS 5
How do I reset MacBook Air? Pinwheel spinning but nothing else happening.
Info:
MacBook Air
My Macbook pro running Tiger 10.4.11 is now starting to randomly, what seems like shut the screen down, and just go to a black screen.
I am running my macbook pro, plugged into the AC / Mains, with another monitor connected, when the macbookpro screen goes black the dual monitor stays up and running, I can even do the mirror screen from the actual macbook pro and run it on the dual monitor and its running perfectly (I hope this makes sense!).
Its really odd and only started in the last few days.. it lasts about 30seconds at a time and is starting to worry me!
i just bought it and am having a little trouble exporting a track i made. i didnt do much to it, just cut it and can not figure out how to export. i go to the export option and then try and save it to the desktop but it is not there when i go to find it
View 3 Replies View RelatedMy trackpad/computer sometimes just freezes out of the blue.. I move my cursor around click.. and sometimes just freezes and i either have to put it to sleep by putting down the lid.. and reopen it or hold the power to reset. or just start pressing random buttons and after about a few minutes or so.. it'll start working again..
View 2 Replies View RelatedBefore I go to sleep, I always put my Mac in sleep mode. But about 90% of the time it wakes up about 2 or 3 seconds later, and I have to put it back to sleep again.
Why is this happening and how can I resolve the issue?
backing up to Time Machine for first time, TM icon is turning but nothing else seems to be happening.
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.7.3)
My screen just has the apple icon and the spinning circle - wont log on. Lost power without shutting down
View 1 Replies View RelatedDoes anyone use a MBP for video editing or do you find it much more easier on a desktop?
View 4 Replies View RelatedI currently have a Mac Mini, ssd drive, 2.6ghz quad core i7 with 16gb of ram. Graphics is intel hd4000. Despite it's not having dedicated graphics, would I be able to do some fairly heavy video editing, in Final Cut Pro, with it? I'm still learning, but the computer was an investment and I hope it grows with me. Right now I'm learning with iMovie, but I plan on purchasing FcP in the near future. I am hoping I don't have to worry about purchasing another Mac for at least a couple of years, just because I don't have discrete graphics or iris in this one.
Basically I'm not looking to edit a feature-length presentation, but I'd like to do some music videos, with some cool effects, maybe get into short films or documentaries of 10 to 15 min in length. Nothing too intense, but I'd like to play around with some effects.
I have come across a problem whilst editing in final cut pro.
When i import from my camera into fcp the video quality looks fine and it is hd and when i play it frame by frame the video quality looks fine, it's just when i play it, the video suddenly drops in quality and goes slightly pixelated.
Can the new mini's with the new video cards run final cut pro? I am not a video editor but do some small projects once in awhile. I would max out the mini at 4GB of ram running (2) 24" monitors.
View 2 Replies View RelatedI've shot a film on the RED one camera and our editor and colourist worked with Final Cut and in 1920x1080. I've exported this as a single Apple ProRes HQ Quicktime and used the 'DVD: High Quality 90 mins' setting in Compressor - and then used DVD studio pro to burn (all this is using Final Cut Studio 2).
View 6 Replies View Relatedfrom my sd cards and my camera but not if i transfer it to my hard drive then try to pull them off a seagate hard drive or a my book studio that both work for mac?
Info:
iMac, Mac OS X (10.7.4)
My friend is trying to convert a trailer for web streaming but is having troubles with the format. We filmed the videos in Nashville and then he edited the trailer but every time he sends me a copy it's pixelated... What settings he should be using on the compressor?
View 2 Replies View RelatedMy Panasonic GH4 camera records UHD in either .Mov or MP4. I choose .Mov.
The newer Pansonic FX1000 camera only records UHD in MP4. I use Mpeg Streamclip and Toast Titanium, neither of which will recognise a MP4 file from the GH4.
Any file converter that will convert MP4 4K/UHD to .Mov 4K/UHD.
(I know FCPX will handle both "formats" but I need to convert outside of a main editing program)
Info:
Final Cut Pro X, Mac OS X (10.6.8)
I want to subtitle my video in several languages? Is there a program which makes it easy?
View 3 Replies View RelatedI can not get HDMI video output through FCP-X 10.1.3. I tested the card and I get video through it to my HDMI monitor using Blackmagic Media Express, so I know the card, monitor, and cable are in perfect working condition. I have windows>AV output selected in FCP-X, but can not get a signal through. I think it is a bug, and a major one at that. I really need this for color grading and to properly view my actual clips.
Info:
Mac Pro, OS X Mavericks (10.9.4), 3.2 Quad Core 32GB 1066 DDR3
I just got final cut six studio a few months ago and the manuals are huge does anyone know of an online video demo, I can seem to find one. or advice from someone using it. Why will it not upload anything? I have footage in IMovie but cant seem to transfer it to final cut?
View 2 Replies View RelatedIm trying to Capture videos from a sony dvd camcorder. im using a canopus advanced DV converter (ADVC-110 is the model #). quicktime version 10.0 is installed on this computer.
iMac 6.1 using OS X 10.6.2so this is what happens. i will attempt to capture a video from the camcorder to final cut express hd and during the capture, the video will momentarily freeze on the computer, however the playback on the camcorder continues. the result is that the video freezes while the audio continues to capture (and during playback as well). any ideas on what the problem could be?
i dont use this computer for any software/music downloading or anything like that so viruses are pretty much out of the question. if theres any other information you may need let me know.
i've connected my DV camera into my computer, its been recognized by final cut, and will let me import (capture). But when i go to import it doesnt divide the footage into clips as its being captured. Is there a way to modify this? Or does it divide after its done importing? Or not at all?
View 1 Replies View RelatedI have a bella Pro Series video editing keyboard mapped for final cut. It has Media key and a jog wheel. Anyway, because of the symbols on the keys it is hard to see the letters. I have the aluminum keyboard that came with my mac pro sitting around and I was wondering if it was possible to use both the aluminum keyboard and my editing keyboard at the same time Or will it create conflicts?
View 3 Replies View RelatedI created a mp4 file with Share/Export File… (settings: Computer, H.264 Faster Encode, 1920x1080 - edited from an HD camera): its video always freezes at a definite point when played on my BD Player connected to my HDTV through HDMI (audio instead continues on the frozen image).It seem that the issue is a sudden video bit rate pick of almost 50 Mbps while its average is around 20-30 Mbps. It is not clear to me if this freeze is caused by the BD Player or by the HDTV not being able to handle such pick.
As a test I used Compressor to control the output bit rate (settings: average 20 Mbps and pick 25 Mbps) and this seems to fix the problem. To be more certain I should do more tests.
if there is a way in FCPX to control such picks (without using Compressor), either in the Share commands (but it seems to me that they don't provide enough setting controls) or in the timeline. By watching the Video Scopes I can see a quite strong signal in the area where the output file has the bit rate pick. But I don't know any way to have a measure useful to identify them before sharing and avoid a trial and error approach...
Info:
iMac, OS X Mavericks (10.9.4), FCP X - Canon HF M56 PAL
