I have had inquisitor installed and working for months with no problems. For no apparent reason it has stopped working properly. In that it only shows one link "local" and when clicking on this nothing happens. I had downloaded release 58 and Safari is 3.2.1.
View 5 RepliesOn a day-to-day basis I run: Adobe PS, INDD, and AI, Microsoft Entourage, Firefox and iTunes. Just recently, after an upgrade to Leopard, I added Things and Simplify Media to the list.The problem that happens before (on Tiger) and now (on Leopard) is command+tab switching stops functioning and Expose hot corners and shortcuts stop working.
I'm pretty sure this isn't a Finder crash because before, on Tiger, I could quit+restart Firefox and everything would be back to normal. Almost as if some shortcut had causes the system to act differently or there was some app dissonance?
But now, with Leopard, nothing I quit will cause these two features to act properly until I do a restart. Both features (command+tab switching and expose) are very necessary for my work flow. I have checked SysPref to make sure keyboard shortcuts are default and Univeral Access to make sure assisted devices is turned off.
I'm so pleased that Inquisitor is now available for Safari 4 - but it doesn't seem to work.
When search all I get is three suggestions rather than websites (even though this is selected under preferences).
I'm just wondering - do you guys use Safari extensions, and if so, which? I used to use Saft, Inquisitor and Safariblock. Just run into Glims today - how do you like it compared to Saft? Obviously, it runs with WebKit nightlies which Saft does not, that's a point. As for adblocking - is Safariblock state of the art, or do you recommend something else?
View 14 Replies View RelatedI have a mid-2008 (June) MBP 15". Just upgraded to SL last night. I am having a serious issue with time machine. I've been using it with the same external HD since I bought my mac last year. No issues up until I installed SL last night. This morning (my first backup since upgrading), time machine started backing up (~ 9Gb) but just stops at around 300Mb. The clock keeps spinning, but there is no change in the amount backed up.
I'm reading that other folks are having this issue as well. Has anyone figured something out?I've run disk repair (nothing found), restarted my mac & external HD (several times each), and cancelled and restarted the time machine backup (several times). Each time it freezes at a different amount (i.e. 34Mb, 284.2Mb, etc...).
Every time I click on a PDF in Safari, I get error window. How do I just reset it to use whatever the default would be (Preview presumably)?
View 3 Replies View RelatedI just got a mac book pro and I transferred all my applications from my old g4 but handbrake doesn't work the same or doesn't at all. It takes very long to scan and it doesn't let me rip. I tried the same dvd on my old g4 and it worked just fine so it's not the dvd.
View 13 Replies View RelatedMy MacBook has been very buggy lately. (MacBook is less than a year old bought in feb). First whenever I first start up Safari it generally restarts. It says it has a kernel error or something along those lines. This will happen maybe 10 times. This happened for the older version of Safari and the new updated version (4.0.1)
I have also had issues with iworks 09, it would not even start. When it was double clicked it would open and immediately close. I tried to remove the program and reinstall but the same problem occurs. I have also had issues with the OS X panicking and and requiring you to restart the computer. This happens maybe once a week. I am most worried about the Safari restart and the panicking.
I went to iChat with my girlfriend tonight, and for some strange reason she can see me on her computer but I can't see her. All I can see in the video box is the moving image of myself. Audio is also functioning perfectly. Is there anything I can troubleshoot to fix this problem? It's becoming a bit annoying.
View 1 Replies View RelatedSo...I guess this changed in Safari 5. When you start typing a web address in the address bar it pulls from not only your history and bookmarks of websites, but now their titles.So now when I start to type "appl..." Instead of auto-completing to.Is there a way to disable this and not have my address bar complete by site titles and only actual address names?
View 2 Replies View RelatedI'm yet to figure out a pattern, but my Macbook Pro's keyboard will just stop working for several minutes at a time at random points in time...Even if I hit caps or num lock, they don't turn green. Sometimes it'll just happen once every few hours, but I was in class the other day and it would work for a minute, then not work for a few, than work for another minute, etc.
View 3 Replies View RelatedI've noticed that occasionally my IR sensor stops working, and no longer responds to changing the volume, skipping the track in iTunes, etc. It can be resolved by going into Security prefs, disabling and re-enabling the IR sensor. This is annoying, however, and I'm wondering if it's a known issue that might be fixed.
I noticed that when you disable and re-enable the IR sensor, the last few remote button pushes you made while it was broken come through in a burst.
I've read another strand about the problems with the gaps when PowerBooks are closed, but does anybody know how to fix the clasp when it stops working? The hook still comes down and "hooks," but as soon as I let go of it, the top pops back open. It's been getting progressively worse over the past three weeks or so, but now it won't stay closed at all. It's not a big deal when I power the thing down, but I can't just close it and put it to sleep now. (Especially one's that don't break the bank!)
View 9 Replies View RelatedI'm running 10.5.2 on a 2GHz C2D BlackBook. Recently I've encountered 3 symptoms that suggests Quartz Extreme stops working after the computer's been running for a while (and by a while, I mean it could only be a couple hours).
I've recently (a few days ago) set my desktop picture to change every minute. It's supposed to fade smoothly between pictures, and it did for a while, but then eventually I noticed the fading transition had stopped and the pictures were just switching without any kind of transition. The problem was resolved after a restart.
I don't use iMovie often. But I opened iMovie '08 yesterday and I got the following error message: "iMovie requires a graphics card that is compatible with Quartz Extreme. One or more of your graphics cards does not support Quartz Extreme." My only option was to quit iMovie. I noticed my desktop picture was also not doing the transitions any more. After a restart, both problems were resolved.
Today, I got the same error message in iMovie and the desktop isn't transitioning again. I haven't restarted yet, but I assume it will fix itself when I do. Also, I tried adding a widget to my dashboard to see if I get the ripple effect, to test my theory that Quartz Extreme (or is it core image, or core graphics?) stops working after a while. I did not get the ripple effect I usually get when adding a widget.
Since I just started using the changing desktop feature and 10.5.2 is a new update, I don't know if one of those could be causing the issue. I'll try turning off the desktop transitions and see if it continues.
My macbook pro keyboard and my silver Apple bluetooth keyboard (primary keyboard) randomly stop working in Finder can anyone explain? Heres the details:
I usually use my wireless keyboard, and when this happens the keyboard keeps working with everything else, and only stops working in Finder i.e. I can't edit the names of files or even click through files with the arrow keys. (the Macbook Pro keyboard also stops working-only in Finder-during these times too as I just tested..)
Also, Finder keeps working its not frozen or anything, I can click around in it with the mouse and open files/apps, etc.
This has only happened approximately 3 or 4 times (I've had the keyboard since the new ones were released and the computer for 1.5 yrs)
Lastly, when I restart the OS (10.4.11) the problem disappears for a week or more..
So to preface my problem let me just say that ive got my own macbook which works on the same wireless network with no faults at all, so i assume its not an error with the networking hardware.
For xmas i bought my parents a macbook, recently (not sure how recently as theyve only just told me its happening) they can be browsing the web then all of a sudden the internet takes ages to load, it stalls on 'trying to connect' for a long time (40+ for each web page).
Ive tried using firefox and the same thing happens so it looks like its not safari specific, during this time i cannot ping [URL] through a terminal either or if i can the response time is unbelievably slow.
Now, ive tried disabling ipv6, ive set the dns servers to opendns and none of this has fixed it. if i click on the airport utility and turn it off and the back on it fixes the problem for a short period of time before it happens again.
I have some strange problem after updating my MacBookPro4,1 to 10.5.7. After a while (can be a few hours) the trackpad and keyboard stop working. When I then put the MBP to sleep and wake it up, both work again but only for about maybe 5-10 minutes. This can be reproduced (put to sleep, works for 5min, put to sleep, works for 5min, etc.) When I reboot it works again for some hours.
View 9 Replies View RelatedI have noticed that my keyboard will randomly stop working after switching Spaces or using other shortcut keys. When I hit the CMD-arrow key to switch spaces, the Spaces box that shows which space you just moved to stays on the screen and the keyboard completely stops working. A logout of required.
Running 10.6.2 with all updates applied.
I have a lot of usb stuff strung out: 6 kbds, 5 mice (three kinds), 4 audio interfaces, 7 hubs not counting in kbds, etc.; most powered. At the root of the USB tree is a KVM switch feeding a new MacBook (10.5.2) and a G5-Quad (10.4.11) This all pretty much works fine and runs for weeks without hiccup.
But tonight, one MacPro kbd, quit. It's at the end of the chain, but it has been working fine. Plugged into hub one level up it's fine. A new Apple thin-flat kbd plugged in where it was works fine.
When MacPro kbd plugged in, the light on the hub port flashes. Other stuff (Wacom tablet, Insignia speakers) works fine and lights the lights. With other stuff pulled (use less power?) kbd fails the same.
So what's up with this sort of problem, and how does one trace/debug? Usually, when (once in a while) there's a USB problem, just unplug and plug back in and it works again.
I have been using Inquisitor as a search add-on to Safari for ages, and even after its acquisition by Yahoo! it still searched Google when configured to.
The last week or so it has no longer searched Google, but Yahoo! searches when configured do work as expected.
I have removed Inquisitor now, because I find Yahoo! not very good...
Anyone else having the same issue? This is v3.2 of Inquisitor on Safari3
Recently I've downloaded Inquisitor 3.0 since it was free and it looks like an awesome app.
But once installed, I could not install it. I've searched the web and the versions that has uninstaller was previous versions. ie. 2.0
So now I cannot uninstall.
Aside from that, it made my safari looks so bad and I cannot edit it.
I have my Canon iP4200 printer hooked up to my iMac and have been using it for years with out any problems until today. When i try to print something nothing happens. In the Printer queue application thing in the dock, it shows the document in queue and its status is "printing". On top of the window it shows this message: 'GenericClass: waiting for device' whatever that means i assume thats the issue but have no clue what it means. I have so many things to print for uni and need to get this working again, how do i get it back to working order again??
View 5 Replies View RelatedThe last few days my keyboard and mouse have stopped functioning at random times on my macbook. I am running snow leopard. I have to shut the lid to put it to sleep and wake it up to get it to respond.
View 1 Replies View RelatedSkype stops working after 20 minutes - the other person can hear me fine, but I cant understand a word the other person is saying (very digitalized). This doesn't happen on the PC so I'm wondering if it's an issue with the MAC. Does anyone have the same problem? Any ideas how to solve it?
View 2 Replies View RelatedThis is the most obnoxious computer problem I've ever encountered. I'm yet to figure out a pattern, but my Macbook Pro's keyboard will just stop working for several minutes at a time at random points in time. Even if I hit caps or num lock, they don't turn green. Sometimes it'll just happen once every few hours, but I was in class the other day and it would work for a minute, then not work for a few, than work for another minute, etc.
View 15 Replies View RelatedI have to delete .plist files..and it usually starts working right away. (com.apple.systempreferences.plist and com.apple.preference.desktopscreeneffect.plist) I've tried resetting the PRAM, etc. The problem gets fixed, only to return about a week later. My screen saver is always set to turn on after 3 minutes.
View 2 Replies View RelatedI have a macbook that is about 2 years old, maybe a little less, and recently it's been giving me trouble. Every time I go online (on firefox or safari), the internet stops working after about 20 minutes. It used to be about every hour but it's more frequent now. To fix it I have to restart. Once I restarted and the internet didn't even work. It's getting to be immensely frustrating since I have to save everything else I'm working on, restart, and then reopen everything. I don't know much about computers but I'm using a wireless that's shared with one other mac and one other pc in the house. Any ideas of what I should do?
View 1 Replies View RelatedI have two shares that are always connected on my mac (two folders via smb share). They are NAS devices. They are also connected on numerous other macs in the house. On my mac pro, once in a while, I will click in the share and nothing happens. I will disconnect the share and then try to reconnect, and I just get "Connecting to server" forever (until I cancel). A reboot does the trick, but a reboot is a pain because I have two VM sessions, numerous jobs in queue, etc.
Is there a way to restart that daemon that handles smb mac shares? I already tried to stop and start network services.
After chatting on FaceTime on my MacBook pro for approximately 5-7 minutes, the other person cannot hear me. I went to Apple and they said it may be the actually mic/camera connection and would have to replace it. I can't lose a week without my MacBook!
Info:
MacBook Pro, Mac OS X (10.6.8)
At least a couple times a week my trackpad mouse click stops working (mouse movement ok) and I am usually browsing in Chrome ver 18.0.1025.165 I have MacBook Air 13" with Lion 10.7.3, anybody experiencing this problem or have resolved?
Info:MacBook Air, Mac OS X (10.7.3)
