I just wanted to know how I could start the page numbers in header and footer on the third page of my document. The first page is the title page and the second page is the table of contents, and of course I wouldn't want the page numbers to be on those pages.
I have searched on the web and in help but couldn't find anything.
I'm working on a brief, and currently have the non-page-numbered and the page-numbered components (the cover page, table of contents, table of authorities, etc etc, and the statement of the case and argument, respectively) as a separate document. It'd be nice if I can combine them into one document (makes for easier printing and management).
But I don't know how to offset the page numbering so that it starts on a certain page as "1" and goes from there. I don't want a page number on my cover page and table of contents, for example.
I am trying to add page numbers to a document in Pages. The document is in Page Layout as opposed to word processing and is a custom sized page. When I go to Insert, nearly all the possible choices, including Page Number, are inactive.
Is there any way to start page numbering on page 2? Reason is my first page is my cover page. I have the "First page is different" checked under the Layout Inspector, but page 2 is still numbered as page 2.
I have been trying to get Microshaft word 2008 for Mac to start page numbers only on page 3.
I have a title page, a table of contents, and then the body of my document.
I have created a section at the bottom of the table of contents. Then in the footer, to the next section, I have tried to insert page numbers. BUT it routinely adds page numbers to the bottom of the first section as well. SO I have page 1 on the title page, page 2 on the table of contents; then I have page 1 on the first page and so on.
I have no experience in Numbers so I was wondering if I could create a histogram in Numbers and then bring over the histogram chart over to Pages? And how would I do that exactly? Can that be done? I need to do something like this so that my lab report for my Physics class could look a bit better typed and everything and without any sort of glue or tape.
Does iWork 09 have an Autosave feature in Pages, Numbers and Keynote, as so many wanted in iWork '08?
Also, does anyone know if the equation editor can work with MS Office 2004's equation editor, or does it only work with the one that you have to buy off another website (can't remember the name of it)?
So my cousin wrote up a 10-page paper and he included some pictures and stuff.
He needs to add a title page and it has to have a header of '1', but for some reason I can't figure this out and neither can he. When he presses ENTER/RETURN to open up a free page at the top, it moves the texts down but not the pictures.
So what I'm trying to do now is make a blank document for the title page and put the page count there and just print that off, but NOW I need to know how to start the page count at 2, instead of 1, on the actual body of the essay.
(Btw, I have tried to do just about everything. When I copied the entire doc to paste it after the title page on a new document, it didn't even copy the pictures.)
I am trying to use multiple page numbering formats in iWork Pages 08 but I cannot figure out how to do this, or if it is at all possible. I am placing my page numbers in the footer but I am requiring a rather complex system. I am writing my university thesis paper, and this makes page numbering a headache. First off, my Cover page and Abstract page cannot have page numbers on them, then the Table of Contents and Preface must use the Roman numberal page numbering Format. Finally, when I reach the Introduction down to the reference pages, those will require the Arabic page numbering format. Is it at all possible to have these mulitple page numbering Schemes present in a single document? Or am I forced to write every section as a separate document (which completely renders the Table of Contents application useless). Please help becuase I have tried everything I can think of and I do not know why this feature is unavailable. furthermore, the steps for ensuring your coverpage is without a number is just rediculously long.
In Pages '08 i can reset the Page Count in the Footer so that Section 3 displays for example 'Page 2 of 10'. This is exactly what I want because the section should have its own page count.
When I opened the document in Pages '09, the footer now displays for example 'Page 2 of 20'. Basically it is showing the entire document Page Count rather than the Page Count for that particular Section. Is this something that Apple have changed for Pages '09? or is there a setting so that the Page Count relates to the Section rather than the entire document?
A friend of mine did a publication using pages in which the final result was a pdf document which had 2 different page layouts. The first page was w26cm by h29.7cm and the rest of the pages were w52cm by h29.7cm.
I'm unable to contact him but he told me that he did this in pages. Im trying to do the same page format and cannot get 2 different sizes.
Is there a way in pages that you can do this and export it as a pdf? What I currently have is 2 documents with different size pages, so is there another way, such as another program that merges the two documents together?
I can't seem to be able to change the page orientation of a few pages, in iWorks Pages. To clarify - i need the orientation of only 3 pages in the whole document, changing from portrait to landscape. It can be done on MS, so i thought it might be possible on Pages, but i can't seem to figure out how, or find anywhere which tells me how.
This is an issue w/ every word processor I've ever tried to replace Word w/- the only reason I still use it is because it has an easy way to start a new chapter w/ a page number other than one. I am very saddened to see that Pages is also incredibly complicated in what should be a simple task.
I write novels. I prefer to have my chapters as their own document. I am not interested in "master documents" or any of the Open Office "solutions" that were so annoying (and confusing). When starting a new chapter- let's say "Chapter Five"- if Chapter Four ended on page 126, obviously Five should start on 127. I have spent the last hour trying to figure out how to do this, on several different message boards. Can it be done or not? I can't believe MS is the only company in the world to make this an easy task- of all companies to make something "easy". Word is my last piece of ANY MS software- I'd love to be done w/ it, and Pages looks great and is very, very intuitive- but this issue has driven me nuts for years. Again, I am not interested in any solution other than what I'm asking about. If it can't be done, I will continue to use Word, although I've paid for Pages and really feel suckered by this.
I created a table with three columns and lots of info in the first column. I need it to continue to page 2, but it won't. Instead, all of the info that should continue to page 2 simply disappears. How do I make the table extend to page 2?
I have a: Macbook Pro running Mac OSX 10.5.8 (Office 2008) Word, Exel, PowerPoint, (Iwork 2009) Numbers, Pages will not save:. I tossed the Word Plist file and that did not work. I have run Virus Barrier X5 and found a about 10 files with Virus 'W97M/Pinky.B' "Quarantened" them and still have the problem.
The problem started -- I think -- when I was doing heavy editing between Numbers and Word. But I don't think it is related (though who knows at this point). Without these programs I'm rendered pretty useless.
How do I stop a mail merge from Address Book to Pages from throwing a new page for each entry?I've got a row of 'first name: second name... etc, etc, and just want a single page with all the address book group on it.But the merge makes each name and address on a new page.
I've been ripping my hair out trying to find the answer to this.
In Numbers for Mac, I need to fill a column automatically with a series of integers (1 - 50) and then the next column with a function that interacts with the first column.
Column A - 1 - 5
Column B - (value in Column A * 5)
I can't figure out how to do it in Numbers When I try to fill column a with 1 - 50 all it does is fill all 1's and I cant find an option how to make that change so it automatically numbers when I highlight them.
The best I can describe is how in Excel you can type 1 in the first cell, then highlight a bunch of cells and the little box appears that lets you click "Fill Series"
I've done some work on Numbers and Pages (both 2008) on my MacBook. For some reason when I try to attach these documents to an email to send to my boss, they are grayed out so that I cannot click them and attach them. I've tried using my university's system as well as hotmail, ymail and gmail, so I assume it has something to do with recognition of the files. So far, I have tried to change the Numbers documents to .xls, but this does not solve my problem.
In this form, the properties ("Get Info") tell me that it is a Microsoft Excel document, but Numbers won't open it and in won't send via email. I have other .xls documents on my computer that I either received by email or downloaded, the icon on my desktop is different, Numbers reads it and they can be attached to emails. It seems that even though I change the .numbers files to .xls, there is still something missing for them to really be Excel files or at least sendable.
I just cant get numbers form app store. Every time I want to get it, it shows "There was an error in the App Store. Please try again later. (100)". And no matter how i try, it is just not downloading...
Does anyone now how to "Page Down" in MSFT Word for Mac w/ a wireless Apple keyboard or directly on my MBP, both of which do not have the page down button? I looked for keyboard shortcuts, but came up with nothing.