Applications :: IWork Pages - How Do I Make The Table Extend To Page 2?
Sep 8, 2008
I created a table with three columns and lots of info in the first column. I need it to continue to page 2, but it won't. Instead, all of the info that should continue to page 2 simply disappears. How do I make the table extend to page 2?
Is there any way to start page numbering on page 2? Reason is my first page is my cover page. I have the "First page is different" checked under the Layout Inspector, but page 2 is still numbered as page 2.
I am trying to use multiple page numbering formats in iWork Pages 08 but I cannot figure out how to do this, or if it is at all possible. I am placing my page numbers in the footer but I am requiring a rather complex system. I am writing my university thesis paper, and this makes page numbering a headache. First off, my Cover page and Abstract page cannot have page numbers on them, then the Table of Contents and Preface must use the Roman numberal page numbering Format. Finally, when I reach the Introduction down to the reference pages, those will require the Arabic page numbering format. Is it at all possible to have these mulitple page numbering Schemes present in a single document? Or am I forced to write every section as a separate document (which completely renders the Table of Contents application useless). Please help becuase I have tried everything I can think of and I do not know why this feature is unavailable. furthermore, the steps for ensuring your coverpage is without a number is just rediculously long.
I have been working on a template where I have placed a two column table on the front page, left side being for a graphic for a letterhead, and right side column for text.
My problem is that on the second page, I would like the document to continue on without any table. I would like for the text to flow from the table into regular margin document on the second page. Is there a way to do this?
I have a: Macbook Pro running Mac OSX 10.5.8 (Office 2008) Word, Exel, PowerPoint, (Iwork 2009) Numbers, Pages will not save:. I tossed the Word Plist file and that did not work. I have run Virus Barrier X5 and found a about 10 files with Virus 'W97M/Pinky.B' "Quarantened" them and still have the problem.
The problem started -- I think -- when I was doing heavy editing between Numbers and Word. But I don't think it is related (though who knows at this point). Without these programs I'm rendered pretty useless.
I'm working on something in pages and need to put in a table of contents, I've looked under sections but I can only see the option for a blank page, can anyone tell me how I insert a table of contents?
Is it possible that I can make it look like PDF file. When you open a pdf file on the right part for example it says chapter 15 and when you click it it opens chapter 15. Our instructor told us today that if you use table of contents you can do this. So, when you are writing long reports if you add a table or kind of thing to one part of your report nothing shifts.
I have been working on a Pages document with a automatically generated TOC, and I would like to have hyperlinks between the contents and the document. I know that clicking on the page number will work, but I would like to click on the actual Titles on the TOC... is this possible?
I made a table of contents in Pages the other day and decided to change the colours (for example, one line orange next brown next orange next brown and so on.) but the 6th one down reverts to black every time i either click on the contents or reopen the document.
Guys I'm having one slight problem. I have iWork 09, and when I try to export PDF the pdf looks really bad on 100% zoom. 125% is quite OK, though still not perfect. When I preview the document in PDF,it looks perfect. However when I export it, characters aren't inline and look weird. Who knows why this might be? I have an imac 2.66 ghz bought in October if that's of any use.
I work at a local public school district as a web designer, and today I received a .pages attachment from someone (person A) who needed the file on our web site.
There wouldn't be a problem except there are no Macs in our district with the latets iWork. And person A got it from person B, So there's no way for me to access it or have person A convert it themselves. Gah.
So, if there is anyone out there that would be kind enough to open this up and export it as a .doc or .pdf or anything usable on my PC
on the iwork cd i used to install it says version 9.0.3, but i still cant open .doc files with it, and when i do try to update it, it says eligible pages cannot be found in applications. What should i do?
In pages, its possible to select all uses of a particular style, but once selected, you can only do very limited things with it. You cannot for instance delete or even copy it. Is there a way to copy the content (not style) of the selected text formatted to a particular style? If not, is there anyway that apple script could be used to do a similar thing?
I'm trying to create pages that have all black backgrounds. I've been doing this by using the Shapes tool, choosing a rectangle, filling in the entire white space for the page, which is 8x11, and then filling in with black.
The problem is that when I do this, Pages seems to think that I want this page and the following page to be connected, in some way. When I look at the two pages in the thumnail view, the yellow outline is around both pages, rather than each individually.
Anybody know how to keep this from happening. Or the right way to create full black backgrounds for pages in Pages?
I haven't found anything on internet about this, so how I had founded a solution, I want to share it.
One day, my Macbook White brokes and I needed to recover a curriculum, and it was in a .pages file. So I had to recover it in Windows, because I have no one who could convert it in Pages.
1� Rename .pages file and add .zip extension. That makes the content of the package visible with any zip utility, (in my case WinRAR).
2� Uncompress the package.
3� Go to QuickLook and search for Preview.pdf. That's a pdf file that contains a low quality version of your pages document. Almost all of the content is in index.xml, but It's very difficult to extract manually the information.
4� Convert the pdf file to doc with any pdf converter. For example: [URL]
5� If your document has attachments (like images), you can replace low quality images of Doc document with the original images located in the uncompressed package.
That's it, of course this works for me with a simple Pages document with an image, that doesn't mean that works for every .pages file.
I know that you can show facing pages using View>inspector>documents. But, this does not place the pages side by side, Is there any way that say page 1 and page 2 can be shown and worked on side by side so you do not have to scroll up and down to view them?
Is there a way to set part of the document to landscape? In Word I would select the section and it allowed the option of setting the selected section to landscape. I don't see that option Pages. I was playing around with the different section breaks and margins, but couldn't figure out how to make it work. I want some tables in landscape and the rest of the document in portrait. This document will be going back and forth from Word on a PC to me. I have not had any problems so far, but I have only had my mac for a month.
Does iWork 09 have an Autosave feature in Pages, Numbers and Keynote, as so many wanted in iWork '08?
Also, does anyone know if the equation editor can work with MS Office 2004's equation editor, or does it only work with the one that you have to buy off another website (can't remember the name of it)?
Is there some way to insert a PDF as a text link (click link >> open document) in a Pages document? Pages defaults to an image of the PDF (which is relatively useless). If there is some way to change this default behaviour (or some other way to hyperlink to a PDF that doesn't result in an image.
I have recently started using Pages in iwork over Office, I like the easy formatting and usability of Pages. But I have to send all these recently create pages doc in a word format to someone and so I did the Save as Word option.When I opened the Word file in Word all the text formatting went all over the place, it looked like it put extra tabs in there and there is a split down the middle of the text like it has put it in two columns.
Is there any way to ensure that when I create my pages document that the formatting is agreeable with word.
Is it possible to have custom numbered bullets? I'm doing something with a very specific formatting and it needs to have a "3 HEADING" formatting but Pages doesn't seem to offer the number without the dot ("3. HEADING"). Is it possible to do a custom numbering scheme somehow?
I'm creating a song set list in a table Pages (showing song titles and composers, etc), which I want to change the order of the songs and play with the order. Is it possible to grab rows and move them around? Or are you stuck with the order that you created?
In iWork 08's Pages application, I need a keyboard shortcut to edit the cell contents. Example: current cell contains the text "new client" -- I decide I want it to read "new clients" without typing it all over again. In Excel for Windows, I would hit F2, that would give me a cursor at the end of the word "client" and I was good to go.
I just installed iWork '08 on my new Macbook pro (snow leopard and general '09 programs are on it) and for some reason, the text coloring and highlighting, generally anything to do with the text and whatever appears on the pages themselves have completely gone blank. The highlight appears as this light purplish color, I can not get the text to read as visible. It appears white no matter what. Even the text blinker isn't showing. Is there a problem with installing iWork '08 on an '09 based Mac? This is a legal copy of iWork I've had since buying my first Mac, so I know it can't really be the disc screwing up, is there anyone that might be able to help? This is an image of the problem. As you can see, the black is the default font color, but it does not show up as it. Also, the general coloration of it is off.
So my cousin wrote up a 10-page paper and he included some pictures and stuff.
He needs to add a title page and it has to have a header of '1', but for some reason I can't figure this out and neither can he. When he presses ENTER/RETURN to open up a free page at the top, it moves the texts down but not the pictures.
So what I'm trying to do now is make a blank document for the title page and put the page count there and just print that off, but NOW I need to know how to start the page count at 2, instead of 1, on the actual body of the essay.
(Btw, I have tried to do just about everything. When I copied the entire doc to paste it after the title page on a new document, it didn't even copy the pictures.)
I just wanted to know how I could start the page numbers in header and footer on the third page of my document. The first page is the title page and the second page is the table of contents, and of course I wouldn't want the page numbers to be on those pages.
I have searched on the web and in help but couldn't find anything.