I have a 24 inch imac and i am connecting the viewsonic VG921m (19'') monitor using the mini-dvi port. The external monitor appears dull (whites have a yellow tint) Is there a way to match up the display to look like mac? I am using the monitor next to my iMac and its currently distracting as its displaying same colors in different tone.
View 9 RepliesI have a 13" mid 2011 MacBook Air and a new ViewSonic VX2453 monitor. I used the Monoprice mini display port to HDMI converter with audio and connected the monitor to my computer's thunderbolt port. The video works perfectly, but the sound isn't working at all. I set my computer's sound output in settings to VX2453 series (type: HDMI), and I set my monitor's audio input to HDMI. Nothing. I also tried changing the frequency in Audio MIDI Setup, which someone recommended on amazon for the monoprice adapter, but that didn't work either.
I tested the monitor's sound by switching audio input instead to "audio in" and connected to my headphone jack, and that worked so the monitor's sound is fine.
Info:
MacBook Air (13-INCH, MID 2011), Mac OS X (10.7.4)
I was surprised one day to find an inch of white line running from top to bottom on my screen. Then after a week it expanded to two inches white line, then suddenly it turned all black and I can't see two inches of my screen from the right edge. I was reading some forums and found out that I can use a dell monitor as a secondary monitor, but is it possible to use the dell monitor as the primary monitor in case the black line will spread throughout the entire iMac screen? so the iMac would serve as a stand alone processor like a regular desktop?
View 3 Replies View RelatedIs there an easy way to cause a connected external monitor to be "disabled?" E.G. I have an iMac connected to an LCD TV (via VGA, spanned, external at 1360x768). If the TV is plugged in, even if it's off, the computer switches to spanning mode. The consequence of this is that, if my preferred setup is to have the external be main, for instance, I essentially have to unplug it from the iMac whenever I don't want to be using it. Even if the external is the 2ary dsplay, it means that the mouse can go off the edge of the screen on one side, and that two of the hot corners are messed up. Is there any utility that could do something like add a "disable external display" item to preferences or the menu bar?
View 17 Replies View RelatedI want to run my g4 17 inch powerbook connected to an external screen with the lid closed, when i shut it the external screen goes off aswell, I have been told to use an external keyboard etc, I want to use a bluetooth keyboard and mouse. Is there anyway of doing this?
View 12 Replies View RelatedI am trying yo plug my NEC EA231WMi into my MBP via DVI and a DVI to mini display port Adaptor and the computer is not recognizing the monitor. It does nothing when I plug the monitor in.
View 1 Replies View RelatedDid any of you experienced this ? My WiFi slows down or even stops working when external monitor is connected (via the big connector, don't remember it's name, DMI or something like that). Air Rev A, 1.6.
View 5 Replies View RelatedI have a strange problem with a WiFi slowdown when connected to a TV. Here are the specs of the equipment:
2.2 Ghz white macbook, santa rosa, 4 gb ram, purchased January 2008
Panasonic TV connected via HDMI to DVI cable + Apple Mini DVI to DVI connector
USB Western Digital harddrive connected to a 500 GB Time Capsule (1st edition, no dual channels)
Snow leopard 10.6.1
Before upgrading to snow leopard, I would frequently use the macbook to provide video to the above mentioned TV streamed from a hard drive connected to an imac (connected to the same time capsule). I moved, and upgraded to snow leopard, and haven't tried this until finished setting up my equipment yesterday. I can stream videos to the macbook from this hard drive fine when nothing is connected. However, the moment I plug in the mini-DVI connector, the WiFi drops to a crawl. This applies not only the to air disk but any data from the network (internet, etc.)
A couple of additional notes: Display is set to mirror. Has nothing to do with clamshell mode because the macbook isn't closed. Nothing to do with location/interference- the effect is instantaneous with plugging and unplugging the cable. The base station is actually closer than in my previous setup and is pretty much 20 feet away in direct line of sight. I connect to another external monitor daily at work (vga, again with apple mini dvi to vga adapter)- no issue whatsoever restart did not help. I canceled all time machine backups over the network to limit that as a factor- no effect.
Recently, my quicktime (with Perian installed) stopped playing AVI files - giving me the whole 'The movie is in a format Quicktime doesn't understand' business. This made no sense to me as AVIs were playing fine previously. Nothing I did could fix the problem. HOWEVER, just today I plugged in an external monitor to test something out; lo and behold, quicktime is playing AVI files just fine again. What's going on?! Has anyone seen this behaviour before?
View 2 Replies View RelatedThe little pop up yellow box is appearing when we mouse over this random spot on our mac-mini, and it shows random headlines with no relation to anything open, even when there isn't any programs running.
Info:
Mac mini (Mid 2010)
WITHOUT closing the lid, because i like using the touchpad. i know that you can turn the brightness all the way down, but sometimes windows from the main screen randomly open on the other display. and it also slows down performance. i want to turn off the 13" screen as if the lid was closed. that way, the mac doesn't even see it.
View 5 Replies View RelatedI have my macbook pro connected t my sony xbr 9 tv, but the tv says there is no signal. however, the macbook pro recognizes the sony tv and it's resolutions. it connected through a mini displayport to hdmi adapter i bought off monoprice, and i don't think it's faulty as i used it in my living room tv thats also a sony.
View 11 Replies View RelatedWhen I close my macbook pro whilst it is connected to an external monitor the internet connection slows down?
Info:
Mac Pro, Mac OS X (10.6.7)
Well my unibody macbook display decided to screw up last night, it was working fine last night no problem. Connected to a external monitor. I fell asleep last night with front row left on, obviously it went to sleep and then I woke up and the screen was black. Now the LED lights are working, my external display is also working. The display settings recognize a screen being present (when I click detect displays and gather windows - 2 windows appear). Ive reset PRAM, SMC, reseated the RAM, control+shift+eject (which just made the screen flicker a little after turning it back on) and Im out of ideas. Its out of warranty and about about 18months old.
View 4 Replies View RelatedI have a 13" MBP and just bought a new 23" external monitor connected via mini DVI to HDMI adapter.The monitor is recognized fine, but there is extreme jitter on the screen - basically very annonying and unusable.
Info:
MacBook Pro
my screen cracked on my MacBook and I'm unable to see anything (it's just fuzzy white) so I purchased the VGA adaptor so I can connect to an external monitor. When I plug in the screen is zoomed to close and I can not view the entire screen. I can see one application that I have open, which is iMovie but can not see the top menu or my icons at the bottom. How can I adjust the settings seeing how I can not access the menu bar or anything else for that matter. It also appears to be showing a second screen, maybe not my desktop because the background is different. I'm running on OS X Lion.
I'm trying to finish an end of the year slide show for my kindergartner that I need completed today, I was five minutes away from finalizing then my two year old threw his monster truck at my screen!
Info:
MacBook, Mac OS X (10.7.4)
I have a 27" i7. I have a 24" DVI Montior hooked up to it via MDP->DVI adaptor. When the 24" Monitor is on, everything is fine. When I turn the monitor off, the magic mouse tracking on the 27" screen stutters. I am not kidding - it took me ages to figure out that to fix I either need to turn the other monitor on OR disconnect the MDP->DVI adaptor.
View 2 Replies View RelatedI searched the archives and I can't believe no one has mentioned this yet! This is a huge problem on both my Rev A and my new Rev B. When you connect an external monitor and external speakers using the headphone output, there is a high frequency ringing sound coming out of the speakers. I've managed to live with it by turning the treble to minimum and keeping the volume low enough but at the expense of sound quality. The strange part is, if you disconnect the monitor, the ringing sound stops. The problem only occurs if you have speakers and monitor plugged in at the same time. I've tried this on my Samsung monitor, my SONY TV, and my Panasonic audio receiver. The problem occurs with both Rev A and Rev B while my white MacBook and 2007 MacBook Pro all sound fine.
View 10 Replies View RelatedI'm currently running a 21.5" iMac that I picked up in October of '09. I also have a Viewsonic 21" monitor (nx2232w) that I have connected to the iMac at the moment through an HDMI to DVI cable out of the Viewsonic, and into a DVI to mini-DVI for the iMac.The monitor is appearing and functioning in this setup, but I can't get a resolution of any decency. Most everything is out-of-range, or wildly odd, and I know I can do better somehow. I've been searching for Viewsonic drivers, trying out different combinations, and trolling the forums to no avail.
View 2 Replies View RelatedI bought a MBA 13" last month and now I'm trying to connect an external monitor through a Mini Display Port-to-HDMI adapter and most of the times the display shows a message "No signal detected"...
I've tried all the possible combinations between the MAC and the Monitor but it would seem a random matter.
Info:
MacBook Air (13-inch Mid 2012), Mavericks 10.9.4
Alu 24" 2.4ghz when they first came out with aluminum, got it at the store. since august 07 My imac had a small yellow tint, i noticed, when i got it and it was not worth anyhting screaming about, i also noticed it had bleeding issues ath the bottom and sides. I wanted to return it or trade but i was convinced out of it.
Now i noticed that from left to right their is a prominent yellow tint streaking it's way across and fading around the half way point.It is irritating and sad to see this display on this mac was ok, at first but it is geting slightly worse.I have apple care, can i trade this/replace it at an applestore, or would they need to fix it?
My ipod suddenly seems to sync with itunes even from another room in the house. I leave it in airplane mode when I'm not using it for internet and this only started happening last night.
Info:
Mac OS X (10.6.8)
Odd stufff, I have a 500 gig Lacie ext HD that my user uses on her Vista machine...
I am setting up a replacement for the Vi$ta machine, which is a 24 inch imac.
I plugged in the ext HD and nothing happened after I powered on the ext HD.
I checked disk utility and it showed up but as a 2TB size ext HD...
I unplugged the Lacie and plugged it back in and all the info showed up correctly.
But ALL the buttons under "First Aid" are greyed out so I cant verify permissions, disk, or repair disk or permissions.
Information:
imac 24 inch
Mac OS X (10.5.8)
I have a 27" Imac and want to use an old 19" monitor as an external unit. I have it hooked up and turned on. Just the old wallpaper shows on it. There isn't an icon or anything diff on my iMac screen for it. How do I use the external? I realize this is pretty dumb, but I'm a newbie here and my Mac expert son is in NC....
View 9 Replies View RelatedI have a newer iMac 24" bought in 11/2007. I have the mini-dvi to vga converter and when I connect it to a external tv capable of 1024x768, the iMac freezes and does nothing. I disconnect and the screen turns blue and the flickers back on and everything works. I have made the connection then booted up, and I have tried every resolution all the way down to 640x480, same thing it just locks up the screen, but again as soon as I unplug the mini-dvi to vga cable from the iMac it flicks to a blue screen and everything comes back. I have reviewed dmesg nothing, and revieiw /var/log/messages. Is there any troubleshooting I can do. I am old school unix/linux guy just converted my family to Apple and would like to use the display on my tv to watch my iTunes movies.
View 3 Replies View RelatedI hope I'm not double posting. Have any of the other new iMac owners experienced weird frequencies coming from external speakers that are connected to their iMacs?
For example: I have a set of studio monitors that are hooked up to my iMac using a firewire audio interface. Whenever I'm copying data I get an extremely high-pitched frequency coming from my speakers that sounds like my hard drive spinning. Also, whenever I'm scrolling or moving the magic mouse I get a loud buzzing coming from the speakers (especially when scrolling). None of this stuff happened with my previous 20" iMac C2D. I have experienced this issue with all three of the 27" iMacs that I have gone through thus far (due to the yellow tint issue). Does this sound like something I'm just going to have to live with. All of these high pitched frequencies are driving me batty!
I have a HITACHI touro desk 3TB external hard dive connected to my iMac OS X version 10.6.8 Every time i start up the system it stays on a grey screen until I unplug the usb of the external hard drive then the system boots up normally. I have tried connecting different usb cables, plug in to different usb ports, and nothing works. I have other external hard drives and they don't give me any problems. is a pain plugging and unplugging the usb cable.
Info:
iMac, Mac OS X (10.6.8)
Upon booting the machine, the LCD display flashes a proper view of the login screen for about 1 second
but then goes dark. When an external monitor is attached the external monitor works perfectly fine -- the
only trouble being that the external monitor is not currently set to "mirror" so it is impossible to log in and access the machine. The IT dept at the institute has a monopoly on repair of computers and so the quick answer -- take it to Apple is not all that easy. Is there a way to:
1) set the iMac to mirror display upon booting up by some clever key combination?
2) set the machine to mirror by remote access and command line methods?
3) mirror by changing something using target mode?
4) or the obvious...somehow login using the real estate provided by the external monitor.
Also has anyone seen this problem with iMac displays? An Intel iMac I think 2.16 Intel Core 2 Duo processor running Tiger.
I heard this is possible, however will it be possible with a windows laptop ( dell e6400) It's a work laptop and wasn't sure If I could do this with some sort of adapter.
View 8 Replies View RelatedTitle says it all...how does the new iMac work as an external monitor? Is there a way to use it as a monitor without having to log in / load OS? Is there any delay as compared to a standard monitor? I'm just thinking long term as the iMac becomes long in the tooth and we move on to new machines. Can the iMac still be used as a quick turn on monitor or do you need to load up both machines (and do you need to rely on all parts functioning in the iMac, such as mobo, hard drive, etc. still working) to utilize it as a monitor)?
View 3 Replies View Related