Has anyone has any luck getting this to work? If so, how? I can not get it going on my 2.66ghz 17" MBP becuase the graphic rating is 1.0 even after a re-test.
View 5 RepliesI've tried Windows Vista and 7 on SL using VMware Fusion, and both have told me that my score was 1.0 because of the graphic card.
Is there any way to trick the windows, or it is really the graphic card is not advanced enough on the MBP?
I just installed Windows 7 RC and I installed all the bootcamp drivers that were in the Disc 1 that came with my mac. It installed everything else like the sound fine but I can't get the Aero feature to work.
Also, I tried installing Flash and it said it installed but when I open up Firefox, it tells me Flash is not installed.
I'm using Fusion with my Boot Camp partition on my MacBook. I've got an external keyboard (Matias OSX Keyboard). My number pad doesn't work in Windows but does in OS X. I'm not sure if there is a num lock key or how to access it if that would make the difference.
View 4 Replies View RelatedSo, I recently installed Parallels 5 on my MacBook and then I installed Windows 7 as a virual machine. For some reason, I cannot get Windows 7 to run in "aero" mode.
The MacBook I installed it on is a year or two old (it's a Black MacBook). It's got a 2.4 GHz Intel Core 2 Duo and 2 GB 667 MHz DDR2 SDRAM. I believe the sceps are enough to support "aero" mode.
In the virtual machine configure menu. I've selected Processors = 1 and Mani Memory = 1200 MB (top of recommended).
When trying to adjust my settings in Windows 7, there is a message at the bottom of he personalization screen with a link to "Troubleshoot problems with transparency and other aero effects". When I click the link, it runs a test to detect problems. After the test is complete, it tells me that Desktop Window Manager is disabled.
this is the 2nd time installing Vista Ultimate on my Alu iMac (4 Gigs)
I have no flip 3D or the Aero Glass option
When I boot Fusion with MacAffee I get a message that there is an updated version of Fusion is ready for download. When I go to the site I'm offered a choice of just Fusion or Fusion with MacAffee. Since the boot message only talks about Fusion should I do the only Fusion download. Or should I get the combined one?
View 1 Replies View RelatedI think it worked at one point, but sometime around the point when I set up Fusion with the partition, Windows Aero turned off and is no longer an option in the display settings. I installed this driver with the modded INF to see if it would do anything, but Aero is still not an option. I also have issues playing some games in Fusion, while they work fine in Boot Camp.
View 7 Replies View RelatedI made an image of my Windows XP laptop drive using Macrium. I can see the image file there on one of my Mac Pro's internal drives, but Im not able to select in Fusion.. Is there a way to make a Fusion VM from this image? If not, how do I go about creating a VM from my laptops's HD? I'm using Fusion 2.6.
View 9 Replies View RelatedLast night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
I'm having pretty bad difficulties with Windows 7 and Parallels Desktop. I know it's not supported yet, but some folk have it working. I can boot up, but I can't install Parallels Tools. I changed the Configuration to "Windows 2008 Server" like someone suggested in another forum, but fails to boot up.
Seems like VMWare are offering a better helping hand than Parallels Desktop - and while it is not supported yet by them, they say that if you use Windows 2008 Server Config everything works apart from sound.
So am I best giving it a bash with VMWare's Fusion? 30-day trial for free. But I'd rather try get Parallels working since I paid for it.
i just installed windows 7 on my mac last night over my vista partition, but now my avg firewall was disabled to i had to reinstall avg, got that fixed, but my next problem is vmware fusion. it just doesnt work, it boots into windows 7 but then i get the blue error screen saying something like windows has shutdown due to a blah blah blah...anyway i need this fixed right away, do u guys know how to fix it or know any alternatives besides parallels?
View 2 Replies View RelatedI was trying to load the software and a message said "only load on a intel processer system". The mac mini I have does have a intel processer, so why will it not load, is there a way around it?
Info:
Mac mini (Mid 2011), Mac OS X (10.7.2)
I just moved over to Fusion from Parallels. I've installed Windows 7 64-bit and everything appears fine. However, when I go to switch from NAT to bridged networking I lose my Internet and local network connection.
Windows reports the network as "public" and throws up an exclamation point which says no Internet or local network.
Once you click on the network icon and look at the network adapter it shows that the adapter has an IP address from my Apple AirPort Router, but no default gateway.
Windows 7 diagnostics reports that it can't find the default gateway. However, if I manually set the default gateway (which I'm assuming is my router at 10.0.1.1) in the advanced network settings it doesn't take and just disappears after clicking OK.
I've also tried manually setting a static IP address in network settings within Windows 7, and like before it accepts the IP address but then Windows 7 diagnostics reports there's no DHCP server.
On the Airport Router side, I can go into logs and statistics and see that VMWare has obtained an IP address.
Both Windows and OS X's firewalls are off. I've tried reinstalling VMWare Tools and Fusion 3.0. I've deleted and reinstalled the network adapter (in Fusion) over and over.
In Parallels, if you used bridged networking Parallels would put two new "connections" inside your Network system preference. I noticed Fusion doesn't do that.
I don't know what else to try. I've read their support forums and bridged networking documents, but nothing appears to stand out. Everything works fine with NAT.
Before you ask, I had found some old games a few months ago that I wanted to play for nostalgia sake, so I made some Windows 95 and 98 virtual machines. It was pretty easy actually, since I just used Disk Utility to create images of the install discs. VMWare had a nice guide on their site that helped me get networking setup properly also.
But then I got to thinking, it'd be pretty fun to try and get Windows 3.1 up and running as well. I was able to make images of some MS-DOS 6.22 install disks and got that installed just fine. My problem actually comes when trying to install Windows itself. I was able to get the install files from 2 different sources. The first was just a folder of ALL the install files from 6 different disks, and the second was 7 different ZIP files from 7 different disks. I tried creating a single image from the first source, and 7 different images from the 7 unzipped folders from the second source, but on both attempts I'm unable to access the A: drive in DOS to start the setup. It gives me an error message about reading from the drive, followed by the standard "Abort, Retry, Fail?"
Has anybody else tried to get a Windows 3.1 virtual machine up and running and come across this problem? I even tried Googling for the exact lists of files contained on the 6 disks from my first source in order to try and split those up and make the necessary images, but unsuccessfully.
Is it possible or do I have to install windows 7 through bootcamp for the xp virtualization to work?
View 6 Replies View RelatedI don't know what happened, but since I did the update from a couple days ago, my Windows 7 no longer boots. I really don't want to rebuild my 7 image since it's pretty setup. I do have previous Time Machine copies, but I wanted to visit here for some possible solutions before I go thru it the hard way.
View 5 Replies View RelatedI am running Mac 10.5.6 and I have installed VMware Fusion so that i can try and run Windows XP since i have some useful applications. However, when it boots i cannot get the mouse or keyboard to work which means that i cannot do anything on the virtualisation.
View 2 Replies View RelatedThe number pad on the new Apple Keyboard (Aluminum) doesn't work in VMWare Fusion w/ Win XP.
View 9 Replies View Relatedwondering if there is an app, or a way, or using something similar to Aero Snap in Windows 7 on Snow Leopard? It's a feature of 7 I really like, I use it constantly. Other than writing some Applescript, can anyone think of something that lets me do it?
View 12 Replies View RelatedI currently run Fusion on my iMac but I really would like the try the new version of Parallels that came out this week.
Will I mess anything up by installing the demo version while still having Fusion installed? Of course I wouldn't run both at the same time, just have both installed.
I read that for gaming, Bootcamp is the way to go, but for other general Windows use, Parallels or Fusion is the way to go.
But for me, I am planning to play games - hence Bootcamp - as well as use Parallels/Fusion for general use, namely to use Microsoft Office Onenote (an unbeatable note-taking software that needs a Mac version yesterday).
Is this even possible and how much memory will the additional parallels take (I'm planning a 40gb bootcamp partition btw on a 250gb hard drive)?
I have an iMac 3.06 with 4G. The machine runs great and can't believe how nice it runs Windows 7 x64.The only reason I have Windows installed is for Quicken 2010. The odd behavior I'm experiencing is running the Quicken update to automatically download your Quicken portforlio, bank txns, and stocksOn Windows, this updates takes less than 1 minutes. However, on the Mac side is runs for several minutes. The weird thing is the progress meter for each one of the 3 update steps acts like it's get suspended. After 5 or 10 minutes I will close the update window even though it says it's not completed, reopen it and everything is where is last was, but indicates updates are complete.
View 9 Replies View Relatedhow to change the MAC address of the virtual machine under Fusion? I want WinXP installed on my virtual machine to have the same address (set by me) every time it is run.
View 7 Replies View RelatedDoes anyone know how to use the function keys while in Fusion? I'm using Autocad and need functionality of them while using it within Fusion, but they activate OS X functions. This, and enabling "pan" with the middle mouse button, rather than dashboard, seem to be the last two hurdles before I can fully use the Mac for my work.
View 5 Replies View RelatedI have set up a Windows XP virtual machine on my MacPro but I want to also get it into Bootcamp so i can try playing some of my PC Games. Is there anyway I can keep the files/settings I have with my Virtual Machine, or do I basically have to start from scratch? and then, if i can do something here, how?
View 4 Replies View RelatedI have a few questions and I just grabbed a 13in 2.4 alu (Yep I�m a new switcher) First off, just wow on the Mac I love it to death coming from a PC, It�s great to have something that doesn�t feel like a plastic toy in my hands�! So my goal is to Boot Camp Windows 7 + Mac OS X, I have yet to upgrade the RAM on my unit so it�s still at 2GB (waiting for my work to start carrying it) and I�m also using Fusion 2.01. Now the Question x32 or x64? Which would run smoother under a Virtual Machine from within Mac. I know in Boot Camp 64 would be the obvious choice especially when I upgrade to 4GB but will Fusion pose more strain to the system emulating 64 or would it be no difference towards 32?
View 2 Replies View RelatedI have Vista 64-Bit installed via Boot Camp and was wondering if it was possible to then install Fusion with Windows XP because I have some older software which is made for XP.
So basically can I have Vista Boot Camped and Windows XP Fusion running on my Mac?
I have currently XP installed in Boot Camp and I have Vmware fusion installed in OSX. I can boot my XP partition via vmware fusion. Now the question is, when I boot the XP via vmware, I can boot from a Win 7 DVD and the installation starts. Can I just go on an install it in this way? The thing is that I'm not at home and only have a VNC session to my mac, so I can't install it in the classic way which requires a reboot
View 2 Replies View RelatedWhen I installed VM Fusion and Windows XP (2) on my 13" MacBook I was told that I could exit Windows by selecting "suspend guest" from the drop-down menus, but when I do, I get a humungous "click triangle", and it sits there in the center of my screen until I click on it . . . . which boots up Windows again!
The only way I can close Windows is by going to the Fusion menu and selecting "shut down Fusion".
Also, I notice that I can't always activate or click on the Mac menu bar at the top of Windows to see those choices. In fact, when it does appear, it appears rather 'ghostly' and maybe only half of it appears - and is completely without function. When I jiggle the mouse pointer around awhile, it may appear, then I can shut down Windows.
